[Mon Aug 27 10:53:32 2012] Detection parameters:
  Position = (286.2, 193.2) = 15 42 34.31 -52 32 19.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1874.7 +/- 53.2
  Background counts = 142.0
  Rate = 0.02 +/- 0.0007

[Mon Aug 27 10:53:34 2012] Off-axis axis estimate = 7.68'
[Mon Aug 27 11:00:14 2012] Using EEF radius (= 10.27 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 11:00:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug 27 11:00:14 2012] Initial guess for spatial extent in simple fitting = 10.27"
[Mon Aug 27 11:00:14 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.916
[Mon Aug 27 11:00:14 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.27"
[Mon Aug 27 14:23:17 2012] fullrun_pn_xmm0152780201_pi300-10000_cl_pass0_src2.ximg exists
[Mon Aug 27 14:23:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152780201_pi300-10000_cl_pass0_src2.csv
[Mon Aug 27 14:23:17 2012] fullrun_pn_xmm0152780201_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Aug 27 14:23:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152780201_pi300-10000_cl_pass0_src2.csv
[Mon Aug 27 14:23:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152780201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152780201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 14:23:18 2012] fullrun_pn_xmm0152780201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Aug 27 14:23:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152780201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon Aug 27 14:23:18 2012] fullrun_pn_xmm0152780201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Aug 27 14:23:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152780201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon Aug 27 14:23:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152780201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152780201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 18:50:00 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.807579 pixels away
[Mon Aug 27 18:50:01 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 18:50:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 18:50:01 2012] Assessing source extent using major
[Mon Aug 27 18:50:01 2012] Source does appear to be extended
[Mon Aug 27 18:50:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 18:50:32 2012] Using EEF radius (= 10.27 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 18:50:32 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug 27 18:50:32 2012] Initial guess for spatial extent in simple fitting = 10.27"
[Mon Aug 27 18:50:32 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.916
[Mon Aug 27 18:50:32 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 10.27"
[Mon Aug 27 21:11:57 2012] fullrun_pn_xmm0152780201_pi300-10000_cl_pass1_src2.ximg exists
[Mon Aug 27 21:11:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152780201_pi300-10000_cl_pass1_src2.csv
[Mon Aug 27 21:11:57 2012] fullrun_pn_xmm0152780201_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Aug 27 21:11:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152780201_pi300-10000_cl_pass1_src2.csv
[Mon Aug 27 21:11:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152780201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152780201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 21:11:59 2012] fullrun_pn_xmm0152780201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Aug 27 21:11:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152780201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon Aug 27 21:11:59 2012] fullrun_pn_xmm0152780201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Aug 27 21:11:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152780201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon Aug 27 21:11:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152780201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152780201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 00:17:27 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.807579 pixels away
[Tue Aug 28 00:17:27 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 00:17:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 00:17:27 2012] Assessing source extent using major
[Tue Aug 28 00:17:27 2012] Source does appear to be extended
[Tue Aug 28 00:17:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 00:17:54 2012] Counts = 1874.683105, rescaling region sizes by 2.000000
[Tue Aug 28 00:17:54 2012] XMMSAS src. selection expression = ellipse(24850.470947, 16759.058090, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Aug 28 00:17:54 2012] Writing source region out to fullrun_pn_xmm0152780201_pi300-10000_pass1_cl_src2_src.reg
[Tue Aug 28 00:17:54 2012] Extracting stamp from image fullrun_pn_xmm0152780201_pi300-10000_cl_sm2.00.img.gz, (211, 118) - (361, 268)
[Tue Aug 28 00:17:54 2012] XMMSAS bgd. selection expression = annulus(24850.470947, 16759.058090, 4350.000000, 8700.000000, X, Y) && !ellipse(19107.034576, 22938.802063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19953.193741, 12614.828171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23521.379211, 26299.774445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26222.728149, 13574.974380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28766.028503, 13697.174759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28420.880005, 26064.156525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26267.258301, 26136.184814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29675.296387, 25518.327637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27107.180180, 25571.910000, 878.288025, 878.288025, 0.000000, X, Y) && !ellipse(20464.363876, 25186.042755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27210.721200, 24923.086000, 560.546416, 560.546416, 0.000000, X, Y) && !ellipse(28834.568000, 25164.196000, 348.264810, 348.264810, 0.000000, X, Y) && !ellipse(28294.681152, 24580.465088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27262.302340, 24415.526000, 760.812822, 760.812822, 0.000000, X, Y) && !ellipse(26434.251678, 24320.704987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28205.488098, 24140.184235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26891.698000, 23417.836000, 1518.672044, 1518.672044, 0.000000, X, Y) && !ellipse(27530.344000, 22572.278000, 759.336822, 759.336822, 0.000000, X, Y) && !ellipse(27580.760800, 22369.632000, 1079.984031, 1079.984031, 0.000000, X, Y) && !ellipse(27662.762000, 21734.036000, 561.748816, 561.748816, 0.000000, X, Y) && !ellipse(27663.976800, 21260.349500, 810.296023, 810.296023, 0.000000, X, Y) && !ellipse(26692.346600, 20705.052800, 505.185615, 505.185615, 0.000000, X, Y) && !ellipse(27890.785447, 19945.743629, 1551.168045, 444.550348, 78.466040, X, Y) && !ellipse(27914.909000, 19830.238800, 541.200816, 541.200816, 0.000000, X, Y) && !ellipse(27858.407200, 19742.203000, 1551.168045, 408.145612, 79.646900, X, Y) && !ellipse(28119.532640, 18428.950400, 1551.168045, 392.696811, 82.696270, X, Y) && !ellipse(32335.441925, 17932.762909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28220.481049, 17693.520874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28370.637600, 16544.810400, 837.392024, 837.392024, 0.000000, X, Y) && !ellipse(32645.063477, 16843.152161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28398.965200, 16306.343600, 792.462423, 792.462423, 0.000000, X, Y) && !ellipse(28526.261000, 15273.683800, 906.656026, 906.656026, 0.000000, X, Y) && !ellipse(28624.226800, 14929.886000, 993.352029, 993.352029, 0.000000, X, Y) && !ellipse(28687.867096, 14128.540024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17641.038910, 12204.826599, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 28 00:17:54 2012] Writing fullrun_pn_xmm0152780201_pi300-10000_pass1_cl_src2.gif
[Tue Aug 28 00:21:47 2012] Mean detx,y = (-3349.81, 10418.65) 
[Tue Aug 28 00:21:53 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 00:23:58 2012] grppha failed
[Tue Aug 28 00:23:58 2012] Setting source spectrum file to fullrun_pn_xmm0152780201_pi300-10000_pass1_cl_src2_src.pi.gz
[Tue Aug 28 00:23:58 2012] Setting bgd. spectrum file to fullrun_pn_xmm0152780201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Aug 28 01:37:34 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug 28 01:37:34 2012] rmf not generated due to insufficient counts
[Tue Aug 28 02:16:43 2012] Updating aperture counts using extracted products
[Tue Aug 28 02:16:43 2012] Error reading totcts from fullrun_pn_xmm0152780201_pi300-10000_pass1_cl_src2_src.pi.gz
[Tue Aug 28 02:16:44 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 02:16:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Aug 28 02:16:50 2012] xmm0152780201/analysis//spectral/fullrun_pn_xmm0152780201_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete