[Mon Aug 27 10:54:39 2012] Detection parameters:
  Position = (320.9, 308.3) = 15 42 17.79 -52 23 59.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 176.3 +/- 26.8
  Background counts = 122.6
  Rate = 0.002 +/- 0.0004

[Mon Aug 27 10:54:40 2012] Off-axis axis estimate = 1.78'
[Mon Aug 27 15:58:18 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 15:58:18 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Mon Aug 27 15:58:18 2012] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.630
[Mon Aug 27 15:58:18 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 7.32"
[Mon Aug 27 18:49:40 2012] fullrun_mos2_xmm0152780201_pi300-10000_cl_pass0_src15.ximg exists
[Mon Aug 27 18:49:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152780201_pi300-10000_cl_pass0_src15.csv
[Mon Aug 27 18:49:40 2012] fullrun_mos2_xmm0152780201_pi300-10000_cl_pass0_src15_1.ximg exists
[Mon Aug 27 18:49:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152780201_pi300-10000_cl_pass0_src15.csv
[Mon Aug 27 18:49:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152780201_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152780201_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 18:49:41 2012] fullrun_mos2_xmm0152780201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Mon Aug 27 18:49:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152780201_pi300-10000_cl_pass0_tfrozen_src15.csv
[Mon Aug 27 18:49:41 2012] fullrun_mos2_xmm0152780201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Mon Aug 27 18:49:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152780201_pi300-10000_cl_pass0_tfrozen_src15.csv
[Mon Aug 27 18:49:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152780201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152780201_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 18:50:18 2012] Warning, spatial fit 15 centroid is now closest to src. 32
[Mon Aug 27 18:50:18 2012] Source 33 is offset by -4.392095 and -2.036022 pixels which is larger than
2 X fitted extent = 1.909899 x 1.909899, not incorporating fit results
[Mon Aug 27 18:50:18 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 18:50:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 18:50:18 2012] Assessing source extent using major
[Mon Aug 27 18:50:18 2012] Source does appear to be extended
[Mon Aug 27 18:50:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 18:50:18 2012] Source is confused with source 5
[Mon Aug 27 22:20:09 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 22:20:09 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Mon Aug 27 22:20:09 2012] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.630
[Mon Aug 27 22:20:09 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 7.32"
[Tue Aug 28 00:17:10 2012] fullrun_mos2_xmm0152780201_pi300-10000_cl_pass1_src14.ximg exists
[Tue Aug 28 00:17:10 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0152780201_pi300-10000_cl_pass1_src14.csv
[Tue Aug 28 00:17:10 2012] fullrun_mos2_xmm0152780201_pi300-10000_cl_pass1_src14_1.ximg exists
[Tue Aug 28 00:17:10 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0152780201_pi300-10000_cl_pass1_src14.csv
[Tue Aug 28 00:17:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152780201_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152780201_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 00:17:10 2012] fullrun_mos2_xmm0152780201_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Tue Aug 28 00:17:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152780201_pi300-10000_cl_pass1_tfrozen_src14.csv
[Tue Aug 28 00:17:10 2012] fullrun_mos2_xmm0152780201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Tue Aug 28 00:17:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152780201_pi300-10000_cl_pass1_tfrozen_src14.csv
[Tue Aug 28 00:17:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152780201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152780201_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 00:17:39 2012] Source 33 is offset by 7.613376 and 5.986633 pixels which is larger than
2 X fitted extent = 0.841131 x 6.729058, not incorporating fit results
[Tue Aug 28 00:17:39 2012] Source 33 is offset by -2.493428 and -3.503183 pixels which is larger than
2 X fitted extent = 5.060598 x 0.876409, not incorporating fit results
[Tue Aug 28 00:17:39 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 00:17:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 00:17:39 2012] Assessing source extent using major
[Tue Aug 28 00:17:39 2012] Source does appear to be extended
[Tue Aug 28 00:17:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 02:02:18 2012] XMMSAS src. selection expression = ellipse(27871.259735, 26769.911102, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 28 02:02:18 2012] Writing source region out to fullrun_mos2_xmm0152780201_pi300-10000_pass1_cl_src33_src.reg
[Tue Aug 28 02:02:18 2012] Extracting stamp from image fullrun_mos2_xmm0152780201_pi300-10000_cl_sm2.00.img.gz, (283, 271) - (358, 346)
[Tue Aug 28 02:02:18 2012] XMMSAS bgd. selection expression = annulus(27871.259735, 26769.911102, 1087.500000, 2175.000000, X, Y) && !ellipse(26813.324800, 27751.740200, 1870.476054, 1870.476054, 0.000000, X, Y) && !ellipse(30196.457000, 26739.837600, 389.742411, 389.742411, 0.000000, X, Y) && !ellipse(28784.495800, 25224.870000, 567.171216, 567.171216, 0.000000, X, Y) && !ellipse(27738.747223, 25431.075409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27741.848297, 27699.800598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27661.862885, 27275.792419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27664.756866, 28055.104584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27574.443390, 28484.903381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26317.627154, 25976.665509, 371.053866, 290.135236, 0.000000, X, Y) && !ellipse(27436.825256, 29181.843262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24871.774902, 28834.615875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25016.707642, 27104.155396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28133.842133, 25106.660034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28657.674103, 26765.487823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26010.612549, 25340.899994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25180.466000, 29673.926000, 1237.600036, 1237.600036, 0.000000, X, Y) && !ellipse(26754.124000, 28562.494000, 1239.616036, 1239.616036, 0.000000, X, Y) && !ellipse(24535.842000, 27060.997200, 1165.152034, 1165.152034, 0.000000, X, Y) && !ellipse(27030.911102, 24944.666077, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 28 02:02:18 2012] Writing fullrun_mos2_xmm0152780201_pi300-10000_pass1_cl_src33.gif
[Tue Aug 28 02:10:38 2012] Mean detx,y = (-833.70, -942.52) 
[Tue Aug 28 02:10:39 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 02:10:46 2012] grppha failed
[Tue Aug 28 02:10:47 2012] Setting source spectrum file to fullrun_mos2_xmm0152780201_pi300-10000_pass1_cl_src33_src.pi.gz
[Tue Aug 28 02:10:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0152780201_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Tue Aug 28 02:15:00 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug 28 02:15:00 2012] rmf not generated due to insufficient counts
[Tue Aug 28 02:16:45 2012] Updating aperture counts using extracted products
[Tue Aug 28 02:16:45 2012] Error reading totcts from fullrun_mos2_xmm0152780201_pi300-10000_pass1_cl_src33_src.pi.gz
[Tue Aug 28 02:16:45 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 02:16:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Aug 28 02:16:49 2012] xmm0152780201/analysis//spectral/fullrun_mos2_xmm0152780201_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete