[Mon Aug 27 10:54:39 2012] Detection parameters:
  Position = (316.5, 366.2) = 15 42 19.89 -52 19 45.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 141.7 +/- 19.7
  Background counts = 99.0
  Rate = 0.002 +/- 0.0003

[Mon Aug 27 10:54:40 2012] Off-axis axis estimate = 5.08'
[Mon Aug 27 15:58:18 2012] Using EEF radius (= 8.97 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 15:58:18 2012] Initial guess for spatial extent in simple fitting = 8.97"
[Mon Aug 27 15:58:18 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.952
[Mon Aug 27 15:58:18 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 8.97"
[Mon Aug 27 18:49:40 2012] fullrun_mos2_xmm0152780201_pi300-10000_cl_pass0_src18.ximg exists
[Mon Aug 27 18:49:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152780201_pi300-10000_cl_pass0_src18.csv
[Mon Aug 27 18:49:40 2012] fullrun_mos2_xmm0152780201_pi300-10000_cl_pass0_src18_1.ximg exists
[Mon Aug 27 18:49:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152780201_pi300-10000_cl_pass0_src18.csv
[Mon Aug 27 18:49:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152780201_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152780201_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 18:49:41 2012] fullrun_mos2_xmm0152780201_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Mon Aug 27 18:49:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152780201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Mon Aug 27 18:49:41 2012] fullrun_mos2_xmm0152780201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Mon Aug 27 18:49:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152780201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Mon Aug 27 18:49:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152780201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152780201_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 18:50:18 2012] Spatial fit model total counts = 755.220000, observed total counts = 750.000000
[Mon Aug 27 18:50:18 2012] Offset between fit and detection position for source 19 = 0.257514 pixels
[Mon Aug 27 18:50:18 2012] Warning, changing simple spatial fit ID from 18 to 10
[Mon Aug 27 18:50:18 2012] 742.021100 total counts/ 715.083000 bgd. counts: snr = 1.007369
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.257514 pixels
  Position = (316.5, 366.4) = 15 42 19.91 -52 19 46.1
  Extent = 4.5 (2.4-7.3)", rotation angle = 0
  Source counts = 26.9 +/- 27.2
  Background counts = 715.1
  Rate = 0.0004 +/- 0.0004
  Deleting source due to low Poisson probability