[Mon Aug 27 10:54:06 2012] Detection parameters:
  Position = (327.8, 299.9) = 15 42 14.54 -52 24 35.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107.9 +/- 21.1
  Background counts = 125.4
  Rate = 0.001 +/- 0.0003

[Mon Aug 27 10:54:07 2012] Off-axis axis estimate = 2.13'
[Mon Aug 27 14:23:20 2012] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 14:23:20 2012] Initial guess for spatial extent in simple fitting = 7.49"
[Mon Aug 27 14:23:20 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.810
[Mon Aug 27 14:23:20 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 7.49"
[Mon Aug 27 15:58:17 2012] fullrun_mos1_xmm0152780201_pi300-10000_cl_pass0_src32.ximg exists
[Mon Aug 27 15:58:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152780201_pi300-10000_cl_pass0_src32.csv
[Mon Aug 27 15:58:17 2012] fullrun_mos1_xmm0152780201_pi300-10000_cl_pass0_src32_1.ximg exists
[Mon Aug 27 15:58:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152780201_pi300-10000_cl_pass0_src32.csv
[Mon Aug 27 15:58:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0152780201_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0152780201_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 15:58:18 2012] fullrun_mos1_xmm0152780201_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Mon Aug 27 15:58:18 2012] fullrun_mos1_xmm0152780201_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Mon Aug 27 15:58:18 2012] Fit fullrun_mos1_xmm0152780201_pi300-10000_cl_pass0_tfrozen_src32 appears to have run properly
[Mon Aug 27 18:50:10 2012] Source 33 is offset by 2.204096 and -1.716493 pixels which is larger than
2 X fitted extent = 0.838170 x 0.838170, not incorporating fit results
[Mon Aug 27 18:50:10 2012] Spatial fit model total counts = 1473.520000, observed total counts = 1475.000000
[Mon Aug 27 18:50:10 2012] Offset between fit and detection position for source 33 = 0.436869 pixels
[Mon Aug 27 18:50:10 2012] 1340.314500 total counts/ 1317.460000 bgd. counts: snr = 0.629656
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.436869 pixels
  Position = (327.7, 299.5) = 15 42 14.56 -52 24 37.3
  Extent = 2.9 (1.9-6.5)", rotation angle = 0
  Source counts = 22.9 +/- 36.6
  Background counts = 1317.5
  Rate = 0.0003 +/- 0.0005
  Deleting source due to low Poisson probability