[Mon Aug 27 10:54:06 2012] Detection parameters:
  Position = (329.2, 309.0) = 15 42 13.85 -52 23 57.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 109.9 +/- 22.1
  Background counts = 131.4
  Rate = 0.001 +/- 0.0003

[Mon Aug 27 10:54:07 2012] Off-axis axis estimate = 2.36'
[Mon Aug 27 14:23:20 2012] Using EEF radius (= 7.61 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 14:23:20 2012] Initial guess for spatial extent in simple fitting = 7.61"
[Mon Aug 27 14:23:20 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.791
[Mon Aug 27 14:23:20 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 7.61"
[Mon Aug 27 15:58:17 2012] fullrun_mos1_xmm0152780201_pi300-10000_cl_pass0_src29.ximg exists
[Mon Aug 27 15:58:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152780201_pi300-10000_cl_pass0_src29.csv
[Mon Aug 27 15:58:17 2012] fullrun_mos1_xmm0152780201_pi300-10000_cl_pass0_src29_1.ximg exists
[Mon Aug 27 15:58:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152780201_pi300-10000_cl_pass0_src29.csv
[Mon Aug 27 15:58:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0152780201_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0152780201_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 15:58:18 2012] fullrun_mos1_xmm0152780201_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Mon Aug 27 15:58:18 2012] fullrun_mos1_xmm0152780201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Mon Aug 27 15:58:18 2012] Fit fullrun_mos1_xmm0152780201_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Mon Aug 27 18:50:10 2012] Source 31 is offset by 7.215522 and -4.027156 pixels which is larger than
2 X fitted extent = 1.550984 x 1.550984, not incorporating fit results
[Mon Aug 27 18:50:10 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 18:50:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 18:50:10 2012] Assessing source extent using major
[Mon Aug 27 18:50:10 2012] Source does appear to be extended
[Mon Aug 27 18:50:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 21:12:00 2012] Using EEF radius (= 7.61 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 21:12:00 2012] Initial guess for spatial extent in simple fitting = 7.61"
[Mon Aug 27 21:12:00 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.791
[Mon Aug 27 21:12:00 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 7.61"
[Mon Aug 27 22:20:08 2012] fullrun_mos1_xmm0152780201_pi300-10000_cl_pass1_src22.ximg exists
[Mon Aug 27 22:20:08 2012] fullrun_mos1_xmm0152780201_pi300-10000_cl_pass1_src22_1.ximg exists
[Mon Aug 27 22:20:08 2012] Fit fullrun_mos1_xmm0152780201_pi300-10000_cl_pass1_src22 appears to have run properly
[Mon Aug 27 22:20:08 2012] fullrun_mos1_xmm0152780201_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Mon Aug 27 22:20:08 2012] fullrun_mos1_xmm0152780201_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Mon Aug 27 22:20:08 2012] Fit fullrun_mos1_xmm0152780201_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Tue Aug 28 00:17:34 2012] Source 31 is offset by 7.215522 and -4.021271 pixels which is larger than
2 X fitted extent = 1.582299 x 1.582299, not incorporating fit results
[Tue Aug 28 00:17:34 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 00:17:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 00:17:34 2012] Assessing source extent using major
[Tue Aug 28 00:17:34 2012] Source does appear to be extended
[Tue Aug 28 00:17:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 01:37:45 2012] XMMSAS src. selection expression = ellipse(28593.560455, 26836.913422, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 28 01:37:45 2012] Writing source region out to fullrun_mos1_xmm0152780201_pi300-10000_pass1_cl_src31_src.reg
[Tue Aug 28 01:37:45 2012] Extracting stamp from image fullrun_mos1_xmm0152780201_pi300-10000_cl_sm2.00.img.gz, (292, 272) - (367, 347)
[Tue Aug 28 01:37:45 2012] XMMSAS bgd. selection expression = annulus(28593.560455, 26836.913422, 1087.500000, 2175.000000, X, Y) && !ellipse(26819.020880, 27746.750000, 1920.895255, 1920.895255, 0.000000, X, Y) && !ellipse(30205.338470, 26759.811371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28799.143600, 25179.540400, 538.968816, 538.968816, 0.000000, X, Y) && !ellipse(27793.958557, 29752.268341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25706.510500, 28394.474000, 1230.056035, 1230.056035, 0.000000, X, Y) && !ellipse(26257.097504, 29564.995850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29423.719086, 25097.619659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27776.079590, 25541.583038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26158.439270, 25434.248169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24603.684000, 29196.204000, 2460.112071, 2460.112071, 0.000000, X, Y) && !ellipse(28992.959167, 27593.344543, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 28 01:37:45 2012] Writing fullrun_mos1_xmm0152780201_pi300-10000_pass1_cl_src31.gif
[Tue Aug 28 01:50:23 2012] Mean detx,y = (-826.07, 1357.41) 
[Tue Aug 28 01:50:24 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 01:50:34 2012] grppha failed
[Tue Aug 28 01:50:34 2012] Setting source spectrum file to fullrun_mos1_xmm0152780201_pi300-10000_pass1_cl_src31_src.pi.gz
[Tue Aug 28 01:50:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0152780201_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Tue Aug 28 02:02:16 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Aug 28 02:02:16 2012] rmf not generated due to insufficient counts
[Tue Aug 28 02:16:45 2012] Updating aperture counts using extracted products
[Tue Aug 28 02:16:45 2012] Error reading totcts from fullrun_mos1_xmm0152780201_pi300-10000_pass1_cl_src31_src.pi.gz
[Tue Aug 28 02:16:45 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 02:16:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Aug 28 02:16:48 2012] xmm0152780201/analysis//spectral/fullrun_mos1_xmm0152780201_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete