[Mon Aug 27 10:54:06 2012] Detection parameters:
  Position = (281.7, 330.6) = 15 42 36.41 -52 22 10.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.2 +/- 18.3
  Background counts = 119.3
  Rate = 0.001 +/- 0.0003

[Mon Aug 27 10:54:07 2012] Off-axis axis estimate = 2.63'
[Mon Aug 27 14:23:20 2012] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 14:23:20 2012] Initial guess for spatial extent in simple fitting = 7.74"
[Mon Aug 27 14:23:20 2012] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.203
[Mon Aug 27 14:23:20 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 7.74"
[Mon Aug 27 15:58:17 2012] fullrun_mos1_xmm0152780201_pi300-10000_cl_pass0_src33.ximg exists
[Mon Aug 27 15:58:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152780201_pi300-10000_cl_pass0_src33.csv
[Mon Aug 27 15:58:17 2012] fullrun_mos1_xmm0152780201_pi300-10000_cl_pass0_src33_1.ximg exists
[Mon Aug 27 15:58:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152780201_pi300-10000_cl_pass0_src33.csv
[Mon Aug 27 15:58:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0152780201_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0152780201_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 15:58:18 2012] fullrun_mos1_xmm0152780201_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Mon Aug 27 15:58:18 2012] fullrun_mos1_xmm0152780201_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Mon Aug 27 15:58:18 2012] Fit fullrun_mos1_xmm0152780201_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Mon Aug 27 18:50:10 2012] Source 26 is offset by 0.056370 and -5.808234 pixels which is larger than
2 X fitted extent = 0.889779 x 0.889779, not incorporating fit results
[Mon Aug 27 18:50:10 2012] Source 26 is offset by 1.429894 and -5.897084 pixels which is larger than
2 X fitted extent = 6.510621 x 0.875223, not incorporating fit results
[Mon Aug 27 18:50:10 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 18:50:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 18:50:10 2012] Assessing source extent using major
[Mon Aug 27 18:50:10 2012] Source does appear to be extended
[Mon Aug 27 18:50:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 18:50:10 2012] Source is confused with source 27
[Mon Aug 27 21:12:00 2012] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 21:12:00 2012] Initial guess for spatial extent in simple fitting = 7.74"
[Mon Aug 27 21:12:00 2012] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.203
[Mon Aug 27 21:12:00 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 7.74"
[Mon Aug 27 22:20:08 2012] fullrun_mos1_xmm0152780201_pi300-10000_cl_pass1_src24.ximg exists
[Mon Aug 27 22:20:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152780201_pi300-10000_cl_pass1_src24.csv
[Mon Aug 27 22:20:08 2012] fullrun_mos1_xmm0152780201_pi300-10000_cl_pass1_src24_1.ximg exists
[Mon Aug 27 22:20:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152780201_pi300-10000_cl_pass1_src24.csv
[Mon Aug 27 22:20:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0152780201_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0152780201_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 22:20:08 2012] fullrun_mos1_xmm0152780201_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Mon Aug 27 22:20:08 2012] fullrun_mos1_xmm0152780201_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Mon Aug 27 22:20:08 2012] Fit fullrun_mos1_xmm0152780201_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Tue Aug 28 00:17:34 2012] Spatial fit model total counts = 6601.660000, observed total counts = 6393.000000
[Tue Aug 28 00:17:34 2012] Offset between fit and detection position for source 26 = 5.809647 pixels
[Tue Aug 28 00:17:34 2012] Warning, changing simple spatial fit ID from 24 to 9
[Tue Aug 28 00:17:34 2012] 6514.910000 total counts/ 2688.410000 bgd. counts: snr = 73.799593
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 5.809647 pixels
  Position = (283.4, 336.1) = 15 42 35.64 -52 21 57.9
  Extent = 30.8 (30.7-61.5)", rotation angle = 0
  Source counts = 3826.5 +/- 80.7
  Background counts = 2688.4
  Rate = 0.06 +/- 0.001
[Tue Aug 28 00:17:34 2012] Source 26 is offset by 1.664041 and -0.224920 pixels which is larger than
2 X fitted extent = 0.889779 x 0.889779, not incorporating fit results
[Tue Aug 28 00:17:34 2012] Source 26 is offset by 2.735517 and -0.728184 pixels which is larger than
2 X fitted extent = 2.631389 x 2.631389, not incorporating fit results
[Tue Aug 28 00:17:34 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 00:17:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 00:17:34 2012] Assessing source extent using major axis lower bound
[Tue Aug 28 00:17:34 2012] Source does appear to be extended
[Tue Aug 28 00:17:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 01:37:45 2012] Counts = 3826.500000, rescaling region sizes by 2.000000
[Tue Aug 28 01:37:45 2012] XMMSAS src. selection expression = ellipse(24603.684000, 29196.204000, 3690.168106, 3690.168106, 0.000000, X, Y)
[Tue Aug 28 01:37:45 2012] Writing source region out to fullrun_mos1_xmm0152780201_pi300-10000_pass1_cl_src26_src.reg
[Tue Aug 28 01:37:45 2012] Extracting stamp from image fullrun_mos1_xmm0152780201_pi300-10000_cl_sm2.00.img.gz, (71, 124) - (495, 548)
[Tue Aug 28 01:37:45 2012] XMMSAS bgd. selection expression = annulus(24603.684000, 29196.204000, 12300.560354, 24601.120708, X, Y) && !ellipse(26819.020880, 27746.750000, 1920.895255, 1920.895255, 0.000000, X, Y) && !ellipse(19103.094513, 22929.177582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30205.338470, 26759.811371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24868.182648, 16741.763229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28799.143600, 25179.540400, 538.968816, 538.968816, 0.000000, X, Y) && !ellipse(27793.958557, 29752.268341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32338.142090, 17886.147232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28199.641724, 32323.348267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25706.510500, 28394.474000, 1230.056035, 1230.056035, 0.000000, X, Y) && !ellipse(23569.724640, 34743.224274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19808.756165, 34728.754364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36800.436554, 23444.173615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26257.097504, 29564.995850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16831.860321, 37123.901428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38534.414948, 35716.096039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29423.719086, 25097.619659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27776.079590, 25541.583038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41272.743134, 25375.856110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26158.439270, 25434.248169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28593.560455, 26836.913422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13362.236176, 32731.200592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24951.545258, 28574.863739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25466.703247, 29396.783813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25127.348022, 27265.952881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41470.915000, 25655.844000, 1325.280038, 1325.280038, 0.000000, X, Y) && !ellipse(19434.594833, 37234.180725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26281.436157, 13546.674423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25073.366000, 26322.200000, 1086.264031, 1086.264031, 0.000000, X, Y) && !ellipse(28992.959167, 27593.344543, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 28 01:37:45 2012] Writing fullrun_mos1_xmm0152780201_pi300-10000_pass1_cl_src26.gif
[Tue Aug 28 01:51:00 2012] Mean detx,y = (640.22, -658.10) 
[Tue Aug 28 01:51:03 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 01:59:53 2012] grppha failed
[Tue Aug 28 01:59:54 2012] Setting source spectrum file to fullrun_mos1_xmm0152780201_pi300-10000_pass1_cl_src26_src.pi.gz
[Tue Aug 28 01:59:54 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0152780201_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Tue Aug 28 02:16:45 2012] Updating aperture counts using extracted products
[Tue Aug 28 02:16:45 2012] Error reading totcts from fullrun_mos1_xmm0152780201_pi300-10000_pass1_cl_src26_src.pi.gz
[Tue Aug 28 02:16:45 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 02:16:47 2012] Flag b found in src. 26 procflags, skipping spectral fitting
[Tue Aug 28 02:16:47 2012] Flag c found in src. 26 procflags, skipping spectral fitting
[Tue Aug 28 02:16:47 2012] Source 26 has no response, skipping
[Tue Aug 28 02:16:48 2012] xmm0152780201/analysis//spectral/fullrun_mos1_xmm0152780201_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete