[Mon Aug 27 10:54:05 2012] Detection parameters:
  Position = (309.0, 319.2) = 15 42 23.45 -52 23 10.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48144.1 +/- 264.1
  Background counts = 134.4
  Rate = 0.6 +/- 0.003

[Mon Aug 27 10:54:07 2012] Off-axis axis estimate = 1.69'
[Mon Aug 27 14:23:20 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 14:23:20 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Mon Aug 27 14:23:20 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Mon Aug 27 14:23:20 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Mon Aug 27 15:58:16 2012] fullrun_mos1_xmm0152780201_pi300-10000_cl_pass0_src1.ximg exists
[Mon Aug 27 15:58:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152780201_pi300-10000_cl_pass0_src1.csv
[Mon Aug 27 15:58:16 2012] fullrun_mos1_xmm0152780201_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Aug 27 15:58:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152780201_pi300-10000_cl_pass0_src1.csv
[Mon Aug 27 15:58:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0152780201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0152780201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 15:58:17 2012] fullrun_mos1_xmm0152780201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Aug 27 15:58:17 2012] fullrun_mos1_xmm0152780201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Aug 27 15:58:17 2012] Fit fullrun_mos1_xmm0152780201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Aug 27 18:50:10 2012] Spatial fit model total counts = 43978.300000, observed total counts = 44002.000000
[Mon Aug 27 18:50:10 2012] Offset between fit and detection position for source 2 = 0.336083 pixels
[Mon Aug 27 18:50:10 2012] 43996.400000 total counts/ 10935.500000 bgd. counts: snr = 316.151575
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.336083 pixels
  Position = (308.8, 319.5) = 15 42 23.55 -52 23 10.3
  Extent = 8.0 (7.9-8.1)", rotation angle = 0
  Source counts = 33060.9 +/- 209.8
  Background counts = 10935.5
  Rate = 0.5 +/- 0.003
[Mon Aug 27 18:50:10 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 18:50:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 18:50:10 2012] Assessing source extent using major axis lower bound
[Mon Aug 27 18:50:10 2012] Source does appear to be extended
[Mon Aug 27 18:50:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 21:12:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 27 21:12:00 2012] Initial guess for spatial extent in simple fitting = 8.00"
[Mon Aug 27 21:12:00 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.142
[Mon Aug 27 21:12:00 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.00"
[Mon Aug 27 22:20:07 2012] fullrun_mos1_xmm0152780201_pi300-10000_cl_pass1_src1.ximg exists
[Mon Aug 27 22:20:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152780201_pi300-10000_cl_pass1_src1.csv
[Mon Aug 27 22:20:07 2012] fullrun_mos1_xmm0152780201_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Aug 27 22:20:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152780201_pi300-10000_cl_pass1_src1.csv
[Mon Aug 27 22:20:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0152780201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0152780201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 22:20:08 2012] fullrun_mos1_xmm0152780201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Aug 27 22:20:08 2012] fullrun_mos1_xmm0152780201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Aug 27 22:20:08 2012] Fit fullrun_mos1_xmm0152780201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Aug 28 00:17:34 2012] Spatial fit model total counts = 43984.400000, observed total counts = 44002.000000
[Tue Aug 28 00:17:34 2012] Offset between fit and detection position for source 2 = 0.002280 pixels
[Tue Aug 28 00:17:34 2012] 44005.600000 total counts/ 10937.800000 bgd. counts: snr = 316.184309
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.002280 pixels
  Position = (308.8, 319.5) = 15 42 23.55 -52 23 10.3
  Extent = 8.0 (7.9-8.1)", rotation angle = 0
  Source counts = 33067.8 +/- 209.8
  Background counts = 10937.8
  Rate = 0.5 +/- 0.003
[Tue Aug 28 00:17:34 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 00:17:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 00:17:34 2012] Assessing source extent using major axis lower bound
[Tue Aug 28 00:17:34 2012] Source does appear to be extended
[Tue Aug 28 00:17:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 01:37:44 2012] Counts = 33067.800000, rescaling region sizes by 3.000000
[Tue Aug 28 01:37:44 2012] XMMSAS src. selection expression = ellipse(26819.020880, 27746.750000, 1440.671441, 1440.671441, 0.000000, X, Y)
[Tue Aug 28 01:37:44 2012] Writing source region out to fullrun_mos1_xmm0152780201_pi300-10000_pass1_cl_src2_src.reg
[Tue Aug 28 01:37:44 2012] Extracting stamp from image fullrun_mos1_xmm0152780201_pi300-10000_cl_sm2.00.img.gz, (226, 237) - (392, 402)
[Tue Aug 28 01:37:45 2012] XMMSAS bgd. selection expression = annulus(26819.020880, 27746.750000, 7203.357207, 14406.714415, X, Y) && !ellipse(19103.094513, 22929.177582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30205.338470, 26759.811371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24868.182648, 16741.763229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28799.143600, 25179.540400, 538.968816, 538.968816, 0.000000, X, Y) && !ellipse(27793.958557, 29752.268341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32338.142090, 17886.147232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28199.641724, 32323.348267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25706.510500, 28394.474000, 1230.056035, 1230.056035, 0.000000, X, Y) && !ellipse(23569.724640, 34743.224274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19808.756165, 34728.754364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36800.436554, 23444.173615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26257.097504, 29564.995850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16831.860321, 37123.901428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38534.414948, 35716.096039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29423.719086, 25097.619659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27776.079590, 25541.583038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41272.743134, 25375.856110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26158.439270, 25434.248169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28593.560455, 26836.913422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13362.236176, 32731.200592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24603.684000, 29196.204000, 2460.112071, 2460.112071, 0.000000, X, Y) && !ellipse(24951.545258, 28574.863739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25466.703247, 29396.783813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25127.348022, 27265.952881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41470.915000, 25655.844000, 1325.280038, 1325.280038, 0.000000, X, Y) && !ellipse(19434.594833, 37234.180725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26281.436157, 13546.674423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25073.366000, 26322.200000, 1086.264031, 1086.264031, 0.000000, X, Y) && !ellipse(28992.959167, 27593.344543, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 28 01:37:45 2012] Writing fullrun_mos1_xmm0152780201_pi300-10000_pass1_cl_src2.gif
[Tue Aug 28 01:37:56 2012] Mean detx,y = (285.99, -224.52) 
[Tue Aug 28 01:37:59 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 01:42:00 2012] grppha failed
[Tue Aug 28 01:42:00 2012] Setting source spectrum file to fullrun_mos1_xmm0152780201_pi300-10000_pass1_cl_src2_src.pi.gz
[Tue Aug 28 01:42:00 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0152780201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Aug 28 02:16:44 2012] Updating aperture counts using extracted products
[Tue Aug 28 02:16:44 2012] Error reading totcts from fullrun_mos1_xmm0152780201_pi300-10000_pass1_cl_src2_src.pi.gz
[Tue Aug 28 02:16:45 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 02:16:47 2012] Source 2 has no response, skipping
[Tue Aug 28 02:16:48 2012] xmm0152780201/analysis//spectral/fullrun_mos1_xmm0152780201_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete