[Tue Jun 26 10:40:59 2012] Detection parameters:
  Position = (302.5, 346.4) = 21 57 21.26 -69 38 30.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 178.8 +/- 19.2
  Background counts = 134.5
  Rate = 0.008 +/- 0.0008

[Tue Jun 26 10:41:01 2012] Off-axis axis estimate = 3.49'
[Tue Jun 26 10:46:57 2012] Using EEF radius (= 8.17 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 10:46:57 2012] Initial guess for spatial extent in simple fitting = 8.17"
[Tue Jun 26 10:46:57 2012] source mask rpix=1.9, npix_max = 22, mask sum = 19, frac = 0.839
[Tue Jun 26 10:46:57 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 8.17"
[Tue Jun 26 13:30:10 2012] fullrun_pn_xmm0152670101_pi300-10000_cl_pass0_src15.ximg exists
[Tue Jun 26 13:30:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152670101_pi300-10000_cl_pass0_src15.csv
[Tue Jun 26 13:30:10 2012] fullrun_pn_xmm0152670101_pi300-10000_cl_pass0_src15_1.ximg exists
[Tue Jun 26 13:30:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152670101_pi300-10000_cl_pass0_src15.csv
[Tue Jun 26 13:30:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152670101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152670101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 13:30:10 2012] fullrun_pn_xmm0152670101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Tue Jun 26 13:30:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152670101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Tue Jun 26 13:30:10 2012] fullrun_pn_xmm0152670101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Tue Jun 26 13:30:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152670101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Tue Jun 26 13:30:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152670101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152670101_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 14:48:43 2012] Spatial fit model total counts = 560.522000, observed total counts = 456.000000
[Tue Jun 26 14:48:43 2012] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 26 14:48:43 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 14:48:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 14:48:43 2012] Assessing source extent using major
[Tue Jun 26 14:48:43 2012] Source does appear to be extended
[Tue Jun 26 14:48:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 14:48:57 2012] Using EEF radius (= 8.17 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 14:48:57 2012] Initial guess for spatial extent in simple fitting = 8.17"
[Tue Jun 26 14:48:57 2012] source mask rpix=1.9, npix_max = 22, mask sum = 19, frac = 0.839
[Tue Jun 26 14:48:57 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 8.17"
[Tue Jun 26 17:42:56 2012] fullrun_pn_xmm0152670101_pi300-10000_cl_pass1_src15.ximg exists
[Tue Jun 26 17:42:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152670101_pi300-10000_cl_pass1_src15.csv
[Tue Jun 26 17:42:56 2012] fullrun_pn_xmm0152670101_pi300-10000_cl_pass1_src15_1.ximg exists
[Tue Jun 26 17:42:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152670101_pi300-10000_cl_pass1_src15.csv
[Tue Jun 26 17:42:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152670101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152670101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 17:42:57 2012] fullrun_pn_xmm0152670101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Tue Jun 26 17:42:57 2012] fullrun_pn_xmm0152670101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Tue Jun 26 17:42:57 2012] Fit fullrun_pn_xmm0152670101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Tue Jun 26 19:13:49 2012] Source 15 is offset by -6.712229 and 6.500749 pixels which is larger than
2 X fitted extent = 0.988014 x 0.988014, not incorporating fit results
[Tue Jun 26 19:13:50 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 19:13:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 19:13:50 2012] Assessing source extent using major
[Tue Jun 26 19:13:50 2012] Source does appear to be extended
[Tue Jun 26 19:13:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 19:14:02 2012] XMMSAS src. selection expression = ellipse(26272.786072, 30087.301178, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 26 19:14:02 2012] Writing source region out to fullrun_pn_xmm0152670101_pi300-10000_pass1_cl_src15_src.reg
[Tue Jun 26 19:14:02 2012] Extracting stamp from image fullrun_pn_xmm0152670101_pi300-10000_cl_sm2.00.img.gz, (265, 309) - (340, 384)
[Tue Jun 26 19:14:02 2012] XMMSAS bgd. selection expression = annulus(26272.786072, 30087.301178, 1087.500000, 2175.000000, X, Y) && !ellipse(27873.480640, 26629.841200, 1416.324041, 1416.324041, 0.000000, X, Y) && !ellipse(26822.863007, 31019.630646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27937.449615, 27979.404388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28391.533966, 27679.277222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29201.732086, 27170.963898, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 26 19:14:02 2012] Writing fullrun_pn_xmm0152670101_pi300-10000_pass1_cl_src15.gif
[Tue Jun 26 19:25:38 2012] Mean detx,y = (-3316.07, -2083.30) 
[Tue Jun 26 19:25:41 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 26 19:26:15 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 26 19:26:16 2012] Setting source spectrum file to fullrun_pn_xmm0152670101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Tue Jun 26 19:26:16 2012] Setting bgd. spectrum file to fullrun_pn_xmm0152670101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Tue Jun 26 21:01:28 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 26 21:01:28 2012] rmf not generated due to insufficient counts
[Wed Jun 27 11:09:06 2012] Updating aperture counts using extracted products
[Wed Jun 27 11:09:06 2012] Error reading totcts from fullrun_pn_xmm0152670101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed Jun 27 11:09:09 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 27 11:09:09 2012] Using photon index=1.80, rate=0.00761, arf fullrun_pn_xmm0152670101_pi300-10000_pass1_cl_src15.arf
[Wed Jun 27 11:09:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 27 11:09:09 2012] Updating source flux to 2.8e-14
[Wed Jun 27 11:09:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting