[Tue Jun 26 10:40:58 2012] Detection parameters:
  Position = (321.1, 306.8) = 21 57 5.72 -69 41 21.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101961.5 +/- 376.9
  Background counts = 166.3
  Rate = 3 +/- 0.01

[Tue Jun 26 10:41:01 2012] Off-axis axis estimate = 1.75'
[Tue Jun 26 10:46:57 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Tue Jun 26 10:46:57 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Tue Jun 26 10:46:57 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.842
[Tue Jun 26 10:46:57 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.31"
[Tue Jun 26 13:30:09 2012] fullrun_pn_xmm0152670101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 26 13:30:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152670101_pi300-10000_cl_pass0_src1.csv
[Tue Jun 26 13:30:09 2012] fullrun_pn_xmm0152670101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 26 13:30:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152670101_pi300-10000_cl_pass0_src1.csv
[Tue Jun 26 13:30:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152670101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152670101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 13:30:10 2012] fullrun_pn_xmm0152670101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 26 13:30:10 2012] fullrun_pn_xmm0152670101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 26 13:30:10 2012] Fit fullrun_pn_xmm0152670101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 26 14:48:43 2012] Spatial fit model total counts = 62966.500000, observed total counts = 61974.000000
[Tue Jun 26 14:48:43 2012] Offset between fit and detection position for source 1 = 0.254645 pixels
[Tue Jun 26 14:48:43 2012] 63099.700000 total counts/ 15890.700000 bgd. counts: snr = 374.501263
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.254645 pixels
  Position = (320.9, 306.6) = 21 57 5.89 -69 41 22.2
  Extent = 5.9 (5.9-5.9)", rotation angle = 0
  Source counts = 47209.0 +/- 251.2
  Background counts = 15890.7
  Rate = 2 +/- 0.01
[Tue Jun 26 14:48:43 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 14:48:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 14:48:43 2012] Assessing source extent using major axis lower bound
[Tue Jun 26 14:48:43 2012] Source does appear to be extended
[Tue Jun 26 14:48:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 14:48:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 26 14:48:57 2012] Initial guess for spatial extent in simple fitting = 5.90"
[Tue Jun 26 14:48:57 2012] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.160
[Tue Jun 26 14:48:57 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.90"
[Tue Jun 26 17:42:55 2012] fullrun_pn_xmm0152670101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jun 26 17:42:55 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0152670101_pi300-10000_cl_pass1_src1.csv
[Tue Jun 26 17:42:55 2012] fullrun_pn_xmm0152670101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jun 26 17:42:55 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0152670101_pi300-10000_cl_pass1_src1.csv
[Tue Jun 26 17:42:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152670101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152670101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 26 17:42:56 2012] fullrun_pn_xmm0152670101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 26 17:42:56 2012] fullrun_pn_xmm0152670101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 26 17:42:56 2012] Fit fullrun_pn_xmm0152670101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jun 26 19:13:49 2012] Spatial fit model total counts = 62966.500000, observed total counts = 61974.000000
[Tue Jun 26 19:13:49 2012] Offset between fit and detection position for source 1 = 0.000000 pixels
[Tue Jun 26 19:13:49 2012] 63099.700000 total counts/ 15890.700000 bgd. counts: snr = 374.501263
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000000 pixels
  Position = (320.9, 306.6) = 21 57 5.89 -69 41 22.2
  Extent = 5.9 (5.9-5.9)", rotation angle = 0
  Source counts = 47209.0 +/- 251.2
  Background counts = 15890.7
  Rate = 2 +/- 0.01
[Tue Jun 26 19:13:50 2012] Vigneting correction estimate = 1.000000
[Tue Jun 26 19:13:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 26 19:13:50 2012] Assessing source extent using major axis lower bound
[Tue Jun 26 19:13:50 2012] Source does appear to be extended
[Tue Jun 26 19:13:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 26 19:14:02 2012] Counts = 47209.000000, rescaling region sizes by 3.000000
[Tue Jun 26 19:14:02 2012] XMMSAS src. selection expression = ellipse(27873.480640, 26629.841200, 1062.243031, 1062.243031, 0.000000, X, Y)
[Tue Jun 26 19:14:02 2012] Writing source region out to fullrun_pn_xmm0152670101_pi300-10000_pass1_cl_src1_src.reg
[Tue Jun 26 19:14:02 2012] Extracting stamp from image fullrun_pn_xmm0152670101_pi300-10000_cl_sm2.00.img.gz, (260, 246) - (382, 368)
[Tue Jun 26 19:14:02 2012] XMMSAS bgd. selection expression = annulus(27873.480640, 26629.841200, 5311.215153, 10622.430306, X, Y) && !ellipse(38142.208710, 37512.109192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27021.435303, 35381.312775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18499.790878, 32498.925354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26822.863007, 31019.630646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26272.786072, 30087.301178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31676.968109, 29353.400635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27937.449615, 27979.404388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28391.533966, 27679.277222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29201.732086, 27170.963898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29804.444977, 26620.701111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16754.172836, 26477.844604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25954.320520, 26010.205400, 965.736028, 363.424810, -0.000000, X, Y) && !ellipse(23484.582400, 26021.015600, 442.300813, 442.300813, 0.000000, X, Y) && !ellipse(32627.309296, 25712.460724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35043.019562, 25719.302734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29465.818000, 24967.168000, 1236.936036, 1236.936036, 0.000000, X, Y) && !ellipse(26852.685800, 25018.440000, 1144.808033, 1144.808033, 0.000000, X, Y) && !ellipse(26813.607574, 24421.057129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26263.344000, 24392.542000, 2287.568066, 2287.568066, 0.000000, X, Y) && !ellipse(25841.118000, 23859.032000, 1194.232034, 1194.232034, 0.000000, X, Y) && !ellipse(31445.542480, 23089.536041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24713.926000, 22397.540000, 1247.456036, 1247.456036, 0.000000, X, Y) && !ellipse(16461.064240, 22147.360397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24286.120575, 21706.171524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23885.452000, 21220.652000, 1329.480038, 1329.480038, 0.000000, X, Y) && !ellipse(23377.452000, 20498.940000, 2651.408076, 2651.408076, 0.000000, X, Y) && !ellipse(23026.532000, 20022.304000, 1766.784051, 1766.784051, 0.000000, X, Y) && !ellipse(29001.893341, 19203.864822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22609.005807, 19485.635648, 1478.736043, 619.788437, 310.207719, X, Y) && !ellipse(37495.938200, 18972.466400, 465.457613, 465.457613, 0.000000, X, Y) && !ellipse(22017.008000, 18602.550000, 1391.232040, 1391.232040, 0.000000, X, Y) && !ellipse(38769.124847, 18519.545624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21734.728000, 18252.774000, 1574.400045, 1574.400045, 0.000000, X, Y) && !ellipse(21145.732600, 17413.726200, 1692.216049, 455.956013, 124.065000, X, Y) && !ellipse(20943.529400, 17141.868000, 3458.304100, 432.288012, 306.361800, X, Y) && !ellipse(31562.400940, 16341.857407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20671.422000, 16671.452000, 1277.224037, 1277.224037, 0.000000, X, Y)
[Tue Jun 26 19:14:02 2012] Writing fullrun_pn_xmm0152670101_pi300-10000_pass1_cl_src1.gif
[Tue Jun 26 19:14:22 2012] Mean detx,y = (106.47, -245.48) 
[Tue Jun 26 19:14:27 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 26 19:17:51 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 26 19:17:51 2012] Setting source spectrum file to fullrun_pn_xmm0152670101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jun 26 19:17:51 2012] Setting bgd. spectrum file to fullrun_pn_xmm0152670101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jun 27 11:09:06 2012] Updating aperture counts using extracted products
[Wed Jun 27 11:09:06 2012] Error reading totcts from fullrun_pn_xmm0152670101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 27 11:09:08 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 27 11:09:08 2012] Using photon index=1.80, rate=2.49, arf fullrun_pn_xmm0152670101_pi300-10000_pass1_cl_src1.arf
[Wed Jun 27 11:09:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 27 11:09:08 2012] Updating source flux to 5.9e-12
[Wed Jun 27 11:14:11 2012] Reading fit data from xmm0152670101/analysis//spectral/fullrun_pn_xmm0152670101_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jun 27 11:14:11 2012] Spectral fit parameter nH value = 3.8438e+20
[Wed Jun 27 11:14:11 2012] Spectral fit parameter PhoIndex value = 1.92306
[Wed Jun 27 11:14:11 2012] Failed to get F(0.3-8.0) from xmm0152670101/analysis//spectral/fullrun_pn_xmm0152670101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jun 27 11:14:11 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 27 11:14:11 2012] Using Nh = 3.8e+20, photon index=1.92, rate=2.49, arf fullrun_pn_xmm0152670101_pi300-10000_pass1_cl_src1.arf
[Wed Jun 27 11:14:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 27 11:14:11 2012] Updating source flux to 6e-12