[Fri Aug 10 03:44:46 2012] Detection parameters:
  Position = (293.3, 319.0) = 11 2 56.31 -60 54 44.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 338.5 +/- 31.7
  Background counts = 185.8
  Rate = 0.006 +/- 0.0005

[Fri Aug 10 03:44:50 2012] Off-axis axis estimate = 1.54'
[Fri Aug 10 03:45:46 2012] Using EEF radius (= 7.20 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 03:45:46 2012] Initial guess for spatial extent in simple fitting = 7.20"
[Fri Aug 10 03:45:46 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.861
[Fri Aug 10 03:45:46 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 7.20"
[Fri Aug 10 10:01:19 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src9.ximg exists
[Fri Aug 10 10:01:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src9.csv
[Fri Aug 10 10:01:19 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src9_1.ximg exists
[Fri Aug 10 10:01:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src9.csv
[Fri Aug 10 10:01:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 10:01:22 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Fri Aug 10 10:01:22 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Aug 10 10:01:22 2012] Fit fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Fri Aug 10 10:02:07 2012] Spatial fit model total counts = 3571.620000, observed total counts = 3434.000000
[Fri Aug 10 10:02:07 2012] Offset between fit and detection position for source 9 = 2.116487 pixels
[Fri Aug 10 10:02:07 2012] 3548.634000 total counts/ 3176.440000 bgd. counts: snr = 6.603878
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 2.116487 pixels
  Position = (291.5, 320.2) = 11 2 57.37 -60 54 39.0
  Extent = 14.4 (9.1-28.8)", rotation angle = 0
  Source counts = 372.2 +/- 59.6
  Background counts = 3176.4
  Rate = 0.006 +/- 0.0009
[Fri Aug 10 10:02:07 2012] Spatial fit model total counts = 3620.030000, observed total counts = 3410.000000
[Fri Aug 10 10:02:07 2012] Offset between fit and detection position for source 9 = 1.146779 pixels
[Fri Aug 10 10:02:07 2012] Warning, changing simple spatial fit ID from 9 to 19
[Fri Aug 10 10:02:07 2012] 3515.577000 total counts/ 3336.860000 bgd. counts: snr = 3.093833
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.146779 pixels
  Position = (292.6, 320.0) = 11 2 56.70 -60 54 39.6
  Extent = 13.9 (13.9-27.8)", rotation angle = 0
  Source counts = 178.7 +/- 59.3
  Background counts = 3336.9
  Rate = 0.003 +/- 0.0009
[Fri Aug 10 10:02:08 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 10:02:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 10:02:08 2012] Assessing source extent using major axis lower bound
[Fri Aug 10 10:02:08 2012] Source does appear to be extended
[Fri Aug 10 10:02:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 10:02:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 10 10:02:22 2012] Initial guess for spatial extent in simple fitting = 13.91"
[Fri Aug 10 10:02:22 2012] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.024
[Fri Aug 10 10:02:22 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 13.91"
[Fri Aug 10 17:18:59 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_src9.ximg exists
[Fri Aug 10 17:18:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_src9.csv
[Fri Aug 10 17:18:59 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_src9_1.ximg exists
[Fri Aug 10 17:18:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_src9.csv
[Fri Aug 10 17:18:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 17:19:02 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Fri Aug 10 17:19:02 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Aug 10 17:19:02 2012] Fit fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Fri Aug 10 17:19:31 2012] Warning, spatial fit 9 centroid is now closest to src. 52
[Fri Aug 10 17:19:31 2012] Spatial fit model total counts = 3577.560000, observed total counts = 3410.000000
[Fri Aug 10 17:19:31 2012] Offset between fit and detection position for source 9 = 0.058588 pixels
[Fri Aug 10 17:19:31 2012] Warning, changing simple spatial fit ID from 9 to 17
[Fri Aug 10 17:19:31 2012] 3502.648000 total counts/ 3348.560000 bgd. counts: snr = 2.662808
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.058588 pixels
  Position = (292.7, 320.0) = 11 2 56.66 -60 54 39.7
  Extent = 13.9 (13.9-27.8)", rotation angle = 0
  Source counts = 154.1 +/- 59.2
  Background counts = 3348.6
  Rate = 0.002 +/- 0.0009
[Fri Aug 10 17:19:32 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 17:19:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 17:19:32 2012] Assessing source extent using major axis lower bound
[Fri Aug 10 17:19:32 2012] Source does appear to be extended
[Fri Aug 10 17:19:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 17:19:32 2012] Source is confused with source 64
[Fri Aug 10 17:19:41 2012] XMMSAS src. selection expression = ellipse(25413.454000, 27792.348000, 834.756024, 834.756024, 0.000000, X, Y)
[Fri Aug 10 17:19:41 2012] Writing source region out to fullrun_mos2_xmm0152570101_pi300-10000_pass1_cl_src9_src.reg
[Fri Aug 10 17:19:41 2012] Extracting stamp from image fullrun_mos2_xmm0152570101_pi300-10000_cl_sm2.00.img.gz, (245, 272) - (341, 368)
[Fri Aug 10 17:19:41 2012] XMMSAS bgd. selection expression = annulus(25413.454000, 27792.348000, 1391.260040, 2782.520080, X, Y) && !ellipse(26443.005310, 28087.549042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26252.739400, 29719.797200, 871.656025, 871.656025, 0.000000, X, Y) && !ellipse(24156.513060, 29023.280000, 304.620809, 304.620809, 0.000000, X, Y) && !ellipse(26004.806000, 27178.955536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27761.856000, 27935.870000, 2407.120069, 2407.120069, 0.000000, X, Y) && !ellipse(28740.301270, 25261.427002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26817.900000, 30259.830000, 2561.056074, 2561.056074, 0.000000, X, Y) && !ellipse(25625.163361, 29701.480286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26333.880000, 29558.349000, 1280.528037, 1280.528037, 0.000000, X, Y) && !ellipse(26571.004272, 28932.387329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24658.347717, 28404.110840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27319.485800, 28509.507200, 1203.560035, 1203.560035, 0.000000, X, Y) && !ellipse(23956.847000, 28188.736600, 576.196817, 510.711215, 102.975250, X, Y) && !ellipse(24231.318115, 27440.690979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26309.812000, 26712.588000, 2168.688062, 2168.688062, 0.000000, X, Y) && !ellipse(30067.506000, 25971.286000, 2772.064080, 2772.064080, 0.000000, X, Y) && !ellipse(24846.029083, 26575.140808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27921.965485, 26188.395966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28311.561829, 25853.838379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27482.029785, 25470.274261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29265.044000, 25747.588000, 1347.040039, 1347.040039, 0.000000, X, Y) && !ellipse(29050.098000, 24083.384000, 1268.464036, 1268.464036, 0.000000, X, Y)
[Fri Aug 10 17:19:41 2012] Writing fullrun_mos2_xmm0152570101_pi300-10000_pass1_cl_src9.gif
[Fri Aug 10 17:23:56 2012] Mean detx,y = (195.00, -18.75) 
[Fri Aug 10 17:23:58 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 10 17:24:10 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 10 17:24:11 2012] Setting source spectrum file to fullrun_mos2_xmm0152570101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Aug 10 17:24:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0152570101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sat Aug 11 01:06:58 2012] Updating aperture counts using extracted products
[Sat Aug 11 01:06:58 2012] Error reading totcts from fullrun_mos2_xmm0152570101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat Aug 11 01:07:04 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 01:07:04 2012] Using photon index=1.80, rate=0.00245, arf fullrun_mos2_xmm0152570101_pi300-10000_pass1_cl_src9.arf
[Sat Aug 11 01:07:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 11 01:07:04 2012] Updating source flux to 3.1e-14
[Sat Aug 11 01:07:09 2012] Flag c found in src. 9 procflags, skipping spectral fitting