[Fri Aug 10 03:44:49 2012] Detection parameters:
  Position = (235.2, 261.7) = 11 3 30.99 -60 58 48.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.4 +/- 15.4
  Background counts = 56.6
  Rate = 0.002 +/- 0.0004

[Fri Aug 10 03:44:50 2012] Off-axis axis estimate = 5.30'
[Fri Aug 10 03:45:46 2012] Using EEF radius (= 9.08 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 03:45:46 2012] Initial guess for spatial extent in simple fitting = 9.08"
[Fri Aug 10 03:45:46 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.934
[Fri Aug 10 03:45:46 2012] Giving source the simple spatial ID 82 for pass 0, mean size = 9.08"
[Fri Aug 10 10:01:21 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src82.ximg exists
[Fri Aug 10 10:01:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src82.csv
[Fri Aug 10 10:01:21 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src82_1.ximg exists
[Fri Aug 10 10:01:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src82.csv
[Fri Aug 10 10:01:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src82_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 10:01:24 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_tfrozen_src82.ximg exists
[Fri Aug 10 10:01:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_tfrozen_src82.csv
[Fri Aug 10 10:01:24 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_tfrozen_src82_1.ximg exists
[Fri Aug 10 10:01:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_tfrozen_src82.csv
[Fri Aug 10 10:01:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_tfrozen_src82_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_tfrozen_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 10:02:08 2012] Spatial fit model total counts = 1133.000000, observed total counts = 1025.000000
[Fri Aug 10 10:02:08 2012] Poor agreement between spatial fit and data for source 82
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug 10 10:02:08 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 10:02:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 10:02:08 2012] Assessing source extent using major
[Fri Aug 10 10:02:08 2012] Source does appear to be extended
[Fri Aug 10 10:02:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 10:02:08 2012] Source is confused with source 89
[Fri Aug 10 10:02:08 2012] Source is confused with source 91
[Fri Aug 10 10:02:22 2012] Using EEF radius (= 9.08 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 10:02:22 2012] Initial guess for spatial extent in simple fitting = 9.08"
[Fri Aug 10 10:02:22 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.934
[Fri Aug 10 10:02:22 2012] Giving source the simple spatial ID 67 for pass 1, mean size = 9.08"
[Fri Aug 10 17:19:01 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_src67.ximg exists
[Fri Aug 10 17:19:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_src67.csv
[Fri Aug 10 17:19:01 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_src67_1.ximg exists
[Fri Aug 10 17:19:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_src67.csv
[Fri Aug 10 17:19:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 17:19:04 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_tfrozen_src67.ximg exists
[Fri Aug 10 17:19:04 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_tfrozen_src67_1.ximg exists
[Fri Aug 10 17:19:04 2012] Fit fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_tfrozen_src67 appears to have run properly
[Fri Aug 10 17:19:32 2012] Source 82 is offset by 8.316187 and -2.465975 pixels which is larger than
2 X fitted extent = 4.583085 x 4.583085, not incorporating fit results
[Fri Aug 10 17:19:32 2012] Warning: source 72 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 82 at 21.071958 pixels away
[Fri Aug 10 17:19:32 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 17:19:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 17:19:32 2012] Assessing source extent using major
[Fri Aug 10 17:19:32 2012] Source does appear to be extended
[Fri Aug 10 17:19:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 17:19:46 2012] XMMSAS src. selection expression = ellipse(20418.186279, 22717.632812, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 10 17:19:46 2012] Writing source region out to fullrun_mos2_xmm0152570101_pi300-10000_pass1_cl_src82_src.reg
[Fri Aug 10 17:19:46 2012] Extracting stamp from image fullrun_mos2_xmm0152570101_pi300-10000_cl_sm2.00.img.gz, (198, 224) - (273, 299)
[Fri Aug 10 17:19:46 2012] XMMSAS bgd. selection expression = annulus(20418.186279, 22717.632812, 1087.500000, 2175.000000, X, Y) && !ellipse(21221.503800, 25698.792000, 1333.104038, 1333.104038, 0.000000, X, Y) && !ellipse(18131.562000, 21471.389000, 1593.272046, 1593.272046, 0.000000, X, Y) && !ellipse(20124.962189, 24270.986908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18257.296000, 22817.520000, 1562.704045, 1562.704045, 0.000000, X, Y) && !ellipse(18800.654816, 22231.504913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20617.986000, 22003.391600, 1487.600043, 1487.600043, 0.000000, X, Y) && !ellipse(19173.868301, 21887.271072, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19788.388000, 22193.134000, 1552.136045, 1552.136045, 0.000000, X, Y) && !ellipse(20276.065216, 21965.007675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18681.530000, 21785.968000, 3186.544092, 3186.544092, 0.000000, X, Y)
[Fri Aug 10 17:19:46 2012] Writing fullrun_mos2_xmm0152570101_pi300-10000_pass1_cl_src82.gif
[Fri Aug 10 18:13:31 2012] Mean detx,y = (7304.59, 300.40) 
[Fri Aug 10 18:13:33 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 10 18:13:53 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 10 18:13:53 2012] Setting source spectrum file to fullrun_mos2_xmm0152570101_pi300-10000_pass1_cl_src82_src_b10.pi.gz
[Fri Aug 10 18:13:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0152570101_pi300-10000_pass1_cl_src82_bgd.pi.gz
[Sat Aug 11 00:16:26 2012] Not generating rmf since there are only 70 counts
[Sat Aug 11 00:16:26 2012] rmf not generated due to insufficient counts
[Sat Aug 11 01:07:02 2012] Updating aperture counts using extracted products
[Sat Aug 11 01:07:02 2012] Error reading totcts from fullrun_mos2_xmm0152570101_pi300-10000_pass1_cl_src82_src_b10.pi.gz
[Sat Aug 11 01:07:06 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 01:07:06 2012] Using photon index=1.80, rate=0.00168, arf fullrun_mos2_xmm0152570101_pi300-10000_pass1_cl_src82.arf
[Sat Aug 11 01:07:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 11 01:07:06 2012] Updating source flux to 3.1e-14
[Sat Aug 11 01:07:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting