[Fri Aug 10 03:44:48 2012] Detection parameters:
  Position = (286.1, 306.0) = 11 3 0.55 -60 55 39.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 142.3 +/- 24.3
  Background counts = 174.8
  Rate = 0.002 +/- 0.0004

[Fri Aug 10 03:44:50 2012] Off-axis axis estimate = 1.05'
[Fri Aug 10 03:45:46 2012] Using EEF radius (= 6.95 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 03:45:46 2012] Initial guess for spatial extent in simple fitting = 6.95"
[Fri Aug 10 03:45:46 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.909
[Fri Aug 10 03:45:46 2012] Giving source the simple spatial ID 66 for pass 0, mean size = 6.95"
[Fri Aug 10 10:01:21 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src66.ximg exists
[Fri Aug 10 10:01:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src66.csv
[Fri Aug 10 10:01:21 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src66_1.ximg exists
[Fri Aug 10 10:01:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src66.csv
[Fri Aug 10 10:01:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src66_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 10:01:24 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_tfrozen_src66.ximg exists
[Fri Aug 10 10:01:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_tfrozen_src66.csv
[Fri Aug 10 10:01:24 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_tfrozen_src66_1.ximg exists
[Fri Aug 10 10:01:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_tfrozen_src66.csv
[Fri Aug 10 10:01:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_tfrozen_src66_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_tfrozen_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 10:02:08 2012] Warning, spatial fit 66 centroid is now closest to src. 58
[Fri Aug 10 10:02:08 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 10:02:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 10:02:08 2012] Assessing source extent using major
[Fri Aug 10 10:02:08 2012] Source does appear to be extended
[Fri Aug 10 10:02:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 10:02:22 2012] Using EEF radius (= 6.95 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 10:02:22 2012] Initial guess for spatial extent in simple fitting = 6.95"
[Fri Aug 10 10:02:22 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.909
[Fri Aug 10 10:02:22 2012] Giving source the simple spatial ID 52 for pass 1, mean size = 6.95"
[Fri Aug 10 17:19:00 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_src52.ximg exists
[Fri Aug 10 17:19:00 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_src52_1.ximg exists
[Fri Aug 10 17:19:00 2012] Fit fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_src52 appears to have run properly
[Fri Aug 10 17:19:03 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Fri Aug 10 17:19:03 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Fri Aug 10 17:19:03 2012] Fit fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_tfrozen_src52 appears to have run properly
[Fri Aug 10 17:19:32 2012] Source 66 is offset by 3.102173 and 4.422538 pixels which is larger than
2 X fitted extent = 1.241393 x 1.241393, not incorporating fit results
[Fri Aug 10 17:19:32 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 17:19:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 17:19:32 2012] Assessing source extent using major
[Fri Aug 10 17:19:32 2012] Source does appear to be extended
[Fri Aug 10 17:19:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 17:19:32 2012] Source is confused with source 64
[Fri Aug 10 17:19:44 2012] XMMSAS src. selection expression = ellipse(24846.029083, 26575.140808, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 10 17:19:44 2012] Writing source region out to fullrun_mos2_xmm0152570101_pi300-10000_pass1_cl_src66_src.reg
[Fri Aug 10 17:19:44 2012] Extracting stamp from image fullrun_mos2_xmm0152570101_pi300-10000_cl_sm2.00.img.gz, (249, 269) - (324, 344)
[Fri Aug 10 17:19:45 2012] XMMSAS bgd. selection expression = annulus(24846.029083, 26575.140808, 1087.500000, 2175.000000, X, Y) && !ellipse(26443.005310, 28087.549042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25413.454000, 27792.348000, 1113.008032, 1113.008032, 0.000000, X, Y) && !ellipse(24156.513060, 29023.280000, 304.620809, 304.620809, 0.000000, X, Y) && !ellipse(26004.806000, 27178.955536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27761.856000, 27935.870000, 2407.120069, 2407.120069, 0.000000, X, Y) && !ellipse(26817.900000, 30259.830000, 2561.056074, 2561.056074, 0.000000, X, Y) && !ellipse(26333.880000, 29558.349000, 1280.528037, 1280.528037, 0.000000, X, Y) && !ellipse(26571.004272, 28932.387329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24658.347717, 28404.110840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27319.485800, 28509.507200, 1203.560035, 1203.560035, 0.000000, X, Y) && !ellipse(23956.847000, 28188.736600, 576.196817, 510.711215, 102.975250, X, Y) && !ellipse(24231.318115, 27440.690979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26309.812000, 26712.588000, 2168.688062, 2168.688062, 0.000000, X, Y) && !ellipse(27482.029785, 25470.274261, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 10 17:19:45 2012] Writing fullrun_mos2_xmm0152570101_pi300-10000_pass1_cl_src66.gif
[Fri Aug 10 18:05:53 2012] Mean detx,y = (1382.67, -385.24) 
[Fri Aug 10 18:05:56 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 10 18:06:13 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 10 18:06:13 2012] Setting source spectrum file to fullrun_mos2_xmm0152570101_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Fri Aug 10 18:06:13 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0152570101_pi300-10000_pass1_cl_src66_bgd.pi.gz
[Fri Aug 10 23:37:54 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 10 23:37:54 2012] rmf not generated due to insufficient counts
[Sat Aug 11 01:07:01 2012] Updating aperture counts using extracted products
[Sat Aug 11 01:07:01 2012] Error reading totcts from fullrun_mos2_xmm0152570101_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Sat Aug 11 01:07:06 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 01:07:06 2012] Using photon index=1.80, rate=0.00233, arf fullrun_mos2_xmm0152570101_pi300-10000_pass1_cl_src66.arf
[Sat Aug 11 01:07:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 11 01:07:06 2012] Updating source flux to 3.1e-14
[Sat Aug 11 01:07:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting