[Fri Aug 10 03:44:48 2012] Detection parameters:
  Position = (342.1, 301.9) = 11 2 27.14 -60 55 58.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.9 +/- 18.2
  Background counts = 84.7
  Rate = 0.002 +/- 0.0003

[Fri Aug 10 03:44:50 2012] Off-axis axis estimate = 3.18'
[Fri Aug 10 03:45:46 2012] Using EEF radius (= 8.02 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 03:45:46 2012] Initial guess for spatial extent in simple fitting = 8.02"
[Fri Aug 10 03:45:46 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.729
[Fri Aug 10 03:45:46 2012] Giving source the simple spatial ID 65 for pass 0, mean size = 8.02"
[Fri Aug 10 10:01:21 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src65.ximg exists
[Fri Aug 10 10:01:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src65.csv
[Fri Aug 10 10:01:21 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src65_1.ximg exists
[Fri Aug 10 10:01:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src65.csv
[Fri Aug 10 10:01:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 10:01:24 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Fri Aug 10 10:01:24 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Fri Aug 10 10:01:24 2012] Fit fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_tfrozen_src65 appears to have run properly
[Fri Aug 10 10:02:08 2012] Spatial fit model total counts = 1556.240000, observed total counts = 1557.000000
[Fri Aug 10 10:02:08 2012] Offset between fit and detection position for source 65 = 6.393016 pixels
[Fri Aug 10 10:02:08 2012] 1455.721000 total counts/ 1186.780000 bgd. counts: snr = 7.806779
Spatial fit parameters:
  Offset between fit and detection position for source 65 = 6.393016 pixels
  Position = (346.2, 306.7) = 11 2 24.69 -60 55 37.2
  Extent = 16.0 (16.0-32.1)", rotation angle = 0
  Source counts = 268.9 +/- 38.2
  Background counts = 1186.8
  Rate = 0.004 +/- 0.0006
[Fri Aug 10 10:02:08 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 10:02:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 10:02:08 2012] Assessing source extent using major axis lower bound
[Fri Aug 10 10:02:08 2012] Source does appear to be extended
[Fri Aug 10 10:02:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 10:02:08 2012] Source is confused with source 63
[Fri Aug 10 10:02:08 2012] Source is confused with source 70
[Fri Aug 10 10:02:08 2012] Source is confused with source 71
[Fri Aug 10 10:02:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 10 10:02:22 2012] Initial guess for spatial extent in simple fitting = 16.03"
[Fri Aug 10 10:02:22 2012] source mask rpix=3.7, npix_max = 70, mask sum = 64, frac = 0.913
[Fri Aug 10 10:02:22 2012] Giving source the simple spatial ID 51 for pass 1, mean size = 16.03"
[Fri Aug 10 17:19:00 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_src51.ximg exists
[Fri Aug 10 17:19:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_src51.csv
[Fri Aug 10 17:19:00 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_src51_1.ximg exists
[Fri Aug 10 17:19:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_src51.csv
[Fri Aug 10 17:19:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 17:19:03 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Fri Aug 10 17:19:03 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Fri Aug 10 17:19:03 2012] Fit fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_tfrozen_src51 appears to have run properly
[Fri Aug 10 17:19:32 2012] Spatial fit model total counts = 4124.530000, observed total counts = 4117.000000
[Fri Aug 10 17:19:32 2012] Offset between fit and detection position for source 65 = 7.661659 pixels
[Fri Aug 10 17:19:32 2012] Warning, changing simple spatial fit ID from 51 to 49
[Fri Aug 10 17:19:32 2012] 4109.990000 total counts/ 2956.840000 bgd. counts: snr = 21.206641
Spatial fit parameters:
  Offset between fit and detection position for source 65 = 7.661659 pixels
  Position = (346.2, 299.1) = 11 2 24.73 -60 56 10.5
  Extent = 34.7 (34.6-69.3)", rotation angle = 0
  Source counts = 1153.2 +/- 64.1
  Background counts = 2956.8
  Rate = 0.02 +/- 0.001
[Fri Aug 10 17:19:32 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 17:19:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 17:19:32 2012] Assessing source extent using major axis lower bound
[Fri Aug 10 17:19:32 2012] Source does appear to be extended
[Fri Aug 10 17:19:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 17:19:44 2012] Counts = 1153.150000, rescaling region sizes by 2.000000
[Fri Aug 10 17:19:44 2012] XMMSAS src. selection expression = ellipse(30067.506000, 25971.286000, 4158.096120, 4158.096120, 0.000000, X, Y)
[Fri Aug 10 17:19:44 2012] Writing source region out to fullrun_mos2_xmm0152570101_pi300-10000_pass1_cl_src65_src.reg
[Fri Aug 10 17:19:44 2012] Extracting stamp from image fullrun_mos2_xmm0152570101_pi300-10000_cl_sm2.00.img.gz, (107, 60) - (585, 538)
[Fri Aug 10 17:19:44 2012] XMMSAS bgd. selection expression = annulus(30067.506000, 25971.286000, 13860.320399, 27720.640798, X, Y) && !ellipse(35657.446000, 19333.756000, 1122.592032, 1122.592032, 0.000000, X, Y) && !ellipse(22147.893800, 27043.205600, 416.243212, 371.788011, 120.712000, X, Y) && !ellipse(33878.131360, 25128.922600, 436.483213, 436.483213, 0.000000, X, Y) && !ellipse(26443.005310, 28087.549042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14778.375702, 35607.829254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32439.304016, 35084.100830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29272.342590, 34647.130798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17884.316589, 29572.735260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25413.454000, 27792.348000, 1113.008032, 1113.008032, 0.000000, X, Y) && !ellipse(21221.503800, 25698.792000, 1333.104038, 1333.104038, 0.000000, X, Y) && !ellipse(18131.562000, 21471.389000, 1593.272046, 1593.272046, 0.000000, X, Y) && !ellipse(26311.289307, 13937.610229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29983.308400, 35604.778000, 1725.344050, 1725.344050, 0.000000, X, Y) && !ellipse(26252.739400, 29719.797200, 871.656025, 871.656025, 0.000000, X, Y) && !ellipse(24156.513060, 29023.280000, 304.620809, 304.620809, 0.000000, X, Y) && !ellipse(26004.806000, 27178.955536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27761.856000, 27935.870000, 2407.120069, 2407.120069, 0.000000, X, Y) && !ellipse(28740.301270, 25261.427002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16063.541306, 21975.639740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31243.189423, 13770.716415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30868.232910, 36208.896027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28938.711609, 36233.563904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30122.737854, 35863.967896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28217.573792, 36236.372925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31615.193542, 35324.022552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30573.460938, 34863.982971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27376.213593, 33751.631897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23904.898193, 33595.402008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23725.183400, 32907.283400, 991.960029, 991.960029, 0.000000, X, Y) && !ellipse(26387.553600, 31824.237600, 453.638413, 453.638413, 0.000000, X, Y) && !ellipse(26817.900000, 30259.830000, 2561.056074, 2561.056074, 0.000000, X, Y) && !ellipse(25625.163361, 29701.480286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19203.455948, 29704.483124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26333.880000, 29558.349000, 1280.528037, 1280.528037, 0.000000, X, Y) && !ellipse(26571.004272, 28932.387329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18934.266400, 29116.887000, 799.523223, 799.523223, 0.000000, X, Y) && !ellipse(18397.442154, 29089.527893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24658.347717, 28404.110840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27319.485800, 28509.507200, 1203.560035, 1203.560035, 0.000000, X, Y) && !ellipse(23956.847000, 28188.736600, 576.196817, 510.711215, 102.975250, X, Y) && !ellipse(20993.760700, 27826.082200, 287.720008, 287.720008, 0.000000, X, Y) && !ellipse(24231.318115, 27440.690979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31562.170000, 27639.384000, 2159.400062, 2159.400062, 0.000000, X, Y) && !ellipse(35031.379913, 18993.346222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31746.830200, 27086.610000, 430.384812, 430.384812, 0.000000, X, Y) && !ellipse(30730.590000, 26653.756000, 1387.296040, 1387.296040, 0.000000, X, Y) && !ellipse(26309.812000, 26712.588000, 2168.688062, 2168.688062, 0.000000, X, Y) && !ellipse(24846.029083, 26575.140808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27921.965485, 26188.395966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28311.561829, 25853.838379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30647.494000, 26217.872000, 1370.448039, 1370.448039, 0.000000, X, Y) && !ellipse(30825.756400, 26236.202380, 1351.936039, 1351.936039, 0.000000, X, Y) && !ellipse(27482.029785, 25470.274261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29265.044000, 25747.588000, 1347.040039, 1347.040039, 0.000000, X, Y) && !ellipse(30942.212000, 24855.950800, 1347.256039, 1347.256039, 0.000000, X, Y) && !ellipse(30027.889587, 24881.455139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20124.962189, 24270.986908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29050.098000, 24083.384000, 1268.464036, 1268.464036, 0.000000, X, Y) && !ellipse(28266.575012, 23638.165985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27743.876000, 23083.504000, 1246.784036, 1246.784036, 0.000000, X, Y) && !ellipse(20418.186279, 22717.632812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18257.296000, 22817.520000, 1562.704045, 1562.704045, 0.000000, X, Y) && !ellipse(28176.836000, 22343.458000, 1315.912038, 1315.912038, 0.000000, X, Y) && !ellipse(18800.654816, 22231.504913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27713.166000, 22375.457200, 1294.720037, 1294.720037, 0.000000, X, Y) && !ellipse(20617.986000, 22003.391600, 1487.600043, 1487.600043, 0.000000, X, Y) && !ellipse(19173.868301, 21887.271072, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19788.388000, 22193.134000, 1552.136045, 1552.136045, 0.000000, X, Y) && !ellipse(20276.065216, 21965.007675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18681.530000, 21785.968000, 3186.544092, 3186.544092, 0.000000, X, Y) && !ellipse(39597.314000, 21917.124000, 1968.904057, 1968.904057, 0.000000, X, Y) && !ellipse(38602.136780, 21531.037827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37928.544000, 21322.219600, 1869.224054, 1869.224054, 0.000000, X, Y) && !ellipse(37441.696600, 21003.159200, 1869.224054, 335.499210, 153.296300, X, Y) && !ellipse(36924.826000, 20504.636000, 2914.616084, 2914.616084, 0.000000, X, Y) && !ellipse(36146.952000, 19866.296000, 1840.680053, 1840.680053, 0.000000, X, Y)
[Fri Aug 10 17:19:44 2012] Writing fullrun_mos2_xmm0152570101_pi300-10000_pass1_cl_src65.gif
[Fri Aug 10 17:53:51 2012] Mean detx,y = (-1244.65, -3865.35) 
[Fri Aug 10 17:53:56 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 10 18:05:43 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 10 18:05:44 2012] Setting source spectrum file to fullrun_mos2_xmm0152570101_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Fri Aug 10 18:05:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0152570101_pi300-10000_pass1_cl_src65_bgd.pi.gz
[Sat Aug 11 01:07:00 2012] Updating aperture counts using extracted products
[Sat Aug 11 01:07:01 2012] Error reading totcts from fullrun_mos2_xmm0152570101_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Sat Aug 11 01:07:06 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 01:07:06 2012] Using photon index=1.80, rate=0.0183, arf fullrun_mos2_xmm0152570101_pi300-10000_pass1_cl_src65.arf
[Sat Aug 11 01:07:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 11 01:07:06 2012] Updating source flux to 2e-13
[Sat Aug 11 01:07:09 2012] Flag c found in src. 65 procflags, skipping spectral fitting