[Fri Aug 10 03:44:46 2012] Detection parameters:
  Position = (319.2, 312.2) = 11 2 40.83 -60 55 18.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 258.4 +/- 24.7
  Background counts = 125.3
  Rate = 0.005 +/- 0.0004

[Fri Aug 10 03:44:50 2012] Off-axis axis estimate = 1.80'
[Fri Aug 10 03:45:46 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 03:45:46 2012] Initial guess for spatial extent in simple fitting = 7.33"
[Fri Aug 10 03:45:46 2012] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.681
[Fri Aug 10 03:45:46 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 7.33"
[Fri Aug 10 10:01:20 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src20.ximg exists
[Fri Aug 10 10:01:20 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src20_1.ximg exists
[Fri Aug 10 10:01:20 2012] Fit fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src20 appears to have run properly
[Fri Aug 10 10:01:23 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Fri Aug 10 10:01:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Fri Aug 10 10:01:23 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Fri Aug 10 10:01:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Fri Aug 10 10:01:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 10:02:07 2012] Source 20 is offset by -6.086898 and -0.456617 pixels which is larger than
2 X fitted extent = 0.843046 x 6.036145, not incorporating fit results
[Fri Aug 10 10:02:08 2012] Spatial fit model total counts = 2022.380000, observed total counts = 1798.000000
[Fri Aug 10 10:02:08 2012] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug 10 10:02:08 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 10:02:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 10:02:08 2012] Assessing source extent using major
[Fri Aug 10 10:02:08 2012] Source does appear to be extended
[Fri Aug 10 10:02:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 10:02:22 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 10:02:22 2012] Initial guess for spatial extent in simple fitting = 7.33"
[Fri Aug 10 10:02:22 2012] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.681
[Fri Aug 10 10:02:22 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 7.33"
[Fri Aug 10 17:19:00 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_src18.ximg exists
[Fri Aug 10 17:19:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_src18.csv
[Fri Aug 10 17:19:00 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_src18_1.ximg exists
[Fri Aug 10 17:19:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_src18.csv
[Fri Aug 10 17:19:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 17:19:02 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Fri Aug 10 17:19:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Fri Aug 10 17:19:02 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Fri Aug 10 17:19:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Fri Aug 10 17:19:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 17:19:31 2012] Warning, spatial fit 18 centroid is now closest to src. 4
[Fri Aug 10 17:19:32 2012] Spatial fit model total counts = 3619.850000, observed total counts = 3530.000000
[Fri Aug 10 17:19:32 2012] Offset between fit and detection position for source 20 = 9.501389 pixels
[Fri Aug 10 17:19:32 2012] Warning, changing simple spatial fit ID from 18 to 42
[Fri Aug 10 17:19:32 2012] 3493.316000 total counts/ 2646.760000 bgd. counts: snr = 16.455020
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 9.501389 pixels
  Position = (319.7, 321.7) = 11 2 40.56 -60 54 32.4
  Extent = 30.1 (30.0-60.2)", rotation angle = 0
  Source counts = 846.6 +/- 59.1
  Background counts = 2646.8
  Rate = 0.01 +/- 0.0009
[Fri Aug 10 17:19:32 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 17:19:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 17:19:32 2012] Assessing source extent using major axis lower bound
[Fri Aug 10 17:19:32 2012] Source does appear to be extended
[Fri Aug 10 17:19:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 17:19:32 2012] Source is confused with source 4
[Fri Aug 10 17:19:42 2012] XMMSAS src. selection expression = ellipse(27761.856000, 27935.870000, 1805.340052, 1805.340052, 0.000000, X, Y)
[Fri Aug 10 17:19:42 2012] Writing source region out to fullrun_mos2_xmm0152570101_pi300-10000_pass1_cl_src20_src.reg
[Fri Aug 10 17:19:42 2012] Extracting stamp from image fullrun_mos2_xmm0152570101_pi300-10000_cl_sm2.00.img.gz, (216, 218) - (423, 425)
[Fri Aug 10 17:19:42 2012] XMMSAS bgd. selection expression = annulus(27761.856000, 27935.870000, 3008.900087, 6017.800173, X, Y) && !ellipse(22147.893800, 27043.205600, 416.243212, 371.788011, 120.712000, X, Y) && !ellipse(33878.131360, 25128.922600, 436.483213, 436.483213, 0.000000, X, Y) && !ellipse(26443.005310, 28087.549042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29272.342590, 34647.130798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25413.454000, 27792.348000, 1113.008032, 1113.008032, 0.000000, X, Y) && !ellipse(21221.503800, 25698.792000, 1333.104038, 1333.104038, 0.000000, X, Y) && !ellipse(29983.308400, 35604.778000, 1725.344050, 1725.344050, 0.000000, X, Y) && !ellipse(26252.739400, 29719.797200, 871.656025, 871.656025, 0.000000, X, Y) && !ellipse(24156.513060, 29023.280000, 304.620809, 304.620809, 0.000000, X, Y) && !ellipse(26004.806000, 27178.955536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28740.301270, 25261.427002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27376.213593, 33751.631897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23904.898193, 33595.402008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23725.183400, 32907.283400, 991.960029, 991.960029, 0.000000, X, Y) && !ellipse(26387.553600, 31824.237600, 453.638413, 453.638413, 0.000000, X, Y) && !ellipse(26817.900000, 30259.830000, 2561.056074, 2561.056074, 0.000000, X, Y) && !ellipse(25625.163361, 29701.480286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26333.880000, 29558.349000, 1280.528037, 1280.528037, 0.000000, X, Y) && !ellipse(26571.004272, 28932.387329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24658.347717, 28404.110840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27319.485800, 28509.507200, 1203.560035, 1203.560035, 0.000000, X, Y) && !ellipse(23956.847000, 28188.736600, 576.196817, 510.711215, 102.975250, X, Y) && !ellipse(24231.318115, 27440.690979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31562.170000, 27639.384000, 2159.400062, 2159.400062, 0.000000, X, Y) && !ellipse(31746.830200, 27086.610000, 430.384812, 430.384812, 0.000000, X, Y) && !ellipse(30730.590000, 26653.756000, 1387.296040, 1387.296040, 0.000000, X, Y) && !ellipse(26309.812000, 26712.588000, 2168.688062, 2168.688062, 0.000000, X, Y) && !ellipse(30067.506000, 25971.286000, 2772.064080, 2772.064080, 0.000000, X, Y) && !ellipse(24846.029083, 26575.140808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27921.965485, 26188.395966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28311.561829, 25853.838379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30647.494000, 26217.872000, 1370.448039, 1370.448039, 0.000000, X, Y) && !ellipse(30825.756400, 26236.202380, 1351.936039, 1351.936039, 0.000000, X, Y) && !ellipse(27482.029785, 25470.274261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29265.044000, 25747.588000, 1347.040039, 1347.040039, 0.000000, X, Y) && !ellipse(30942.212000, 24855.950800, 1347.256039, 1347.256039, 0.000000, X, Y) && !ellipse(30027.889587, 24881.455139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29050.098000, 24083.384000, 1268.464036, 1268.464036, 0.000000, X, Y) && !ellipse(28266.575012, 23638.165985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27743.876000, 23083.504000, 1246.784036, 1246.784036, 0.000000, X, Y) && !ellipse(28176.836000, 22343.458000, 1315.912038, 1315.912038, 0.000000, X, Y) && !ellipse(27713.166000, 22375.457200, 1294.720037, 1294.720037, 0.000000, X, Y) && !ellipse(20617.986000, 22003.391600, 1487.600043, 1487.600043, 0.000000, X, Y) && !ellipse(18681.530000, 21785.968000, 3186.544092, 3186.544092, 0.000000, X, Y)
[Fri Aug 10 17:19:42 2012] Writing fullrun_mos2_xmm0152570101_pi300-10000_pass1_cl_src20.gif
[Fri Aug 10 17:27:47 2012] Mean detx,y = (-1303.06, -1517.80) 
[Fri Aug 10 17:27:48 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 10 17:28:48 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 10 17:28:48 2012] Setting source spectrum file to fullrun_mos2_xmm0152570101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Fri Aug 10 17:28:48 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0152570101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sat Aug 11 01:06:59 2012] Updating aperture counts using extracted products
[Sat Aug 11 01:06:59 2012] Error reading totcts from fullrun_mos2_xmm0152570101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sat Aug 11 01:07:04 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 01:07:04 2012] Using photon index=1.80, rate=0.0135, arf fullrun_mos2_xmm0152570101_pi300-10000_pass1_cl_src20.arf
[Sat Aug 11 01:07:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 11 01:07:05 2012] Updating source flux to 1.4e-13
[Sat Aug 11 01:07:09 2012] Flag b found in src. 20 procflags, skipping spectral fitting
[Sat Aug 11 01:07:09 2012] Flag p found in src. 20 procflags, skipping spectral fitting
[Sat Aug 11 01:07:09 2012] Flag c found in src. 20 procflags, skipping spectral fitting