[Fri Aug 10 03:44:46 2012] Detection parameters:
  Position = (302.2, 342.0) = 11 2 51.00 -60 53 4.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 227.6 +/- 27.3
  Background counts = 163.6
  Rate = 0.004 +/- 0.0005

[Fri Aug 10 03:44:50 2012] Off-axis axis estimate = 3.17'
[Fri Aug 10 03:45:46 2012] Using EEF radius (= 8.01 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 03:45:46 2012] Initial guess for spatial extent in simple fitting = 8.01"
[Fri Aug 10 03:45:46 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.911
[Fri Aug 10 03:45:46 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 8.01"
[Fri Aug 10 10:01:20 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src16.ximg exists
[Fri Aug 10 10:01:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src16.csv
[Fri Aug 10 10:01:20 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src16_1.ximg exists
[Fri Aug 10 10:01:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src16.csv
[Fri Aug 10 10:01:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 10:01:23 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Fri Aug 10 10:01:23 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Fri Aug 10 10:01:23 2012] Fit fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Fri Aug 10 10:02:07 2012] Spatial fit model total counts = 2874.310000, observed total counts = 2865.000000
[Fri Aug 10 10:02:07 2012] Offset between fit and detection position for source 16 = 0.224613 pixels
[Fri Aug 10 10:02:07 2012] 2859.909000 total counts/ 2710.630000 bgd. counts: snr = 2.867237
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.224613 pixels
  Position = (302.3, 342.2) = 11 2 50.91 -60 53 3.3
  Extent = 10.9 (6.3-16.0)", rotation angle = 0
  Source counts = 149.3 +/- 53.5
  Background counts = 2710.6
  Rate = 0.002 +/- 0.0009
[Fri Aug 10 10:02:08 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 10:02:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 10:02:08 2012] Assessing source extent using major axis lower bound
[Fri Aug 10 10:02:08 2012] Source does appear to be extended
[Fri Aug 10 10:02:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 10:02:08 2012] Source is confused with source 42
[Fri Aug 10 10:02:08 2012] Source is confused with source 44
[Fri Aug 10 10:02:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 10 10:02:22 2012] Initial guess for spatial extent in simple fitting = 10.90"
[Fri Aug 10 10:02:22 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.997
[Fri Aug 10 10:02:22 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 10.90"
[Fri Aug 10 17:18:59 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_src14.ximg exists
[Fri Aug 10 17:18:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_src14.csv
[Fri Aug 10 17:18:59 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_src14_1.ximg exists
[Fri Aug 10 17:18:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_src14.csv
[Fri Aug 10 17:18:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 17:19:02 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Fri Aug 10 17:19:02 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Fri Aug 10 17:19:02 2012] Fit fullrun_mos2_xmm0152570101_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Fri Aug 10 17:19:31 2012] Warning, spatial fit 14 centroid is now closest to src. 41
[Fri Aug 10 17:19:32 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 17:19:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 17:19:32 2012] Assessing source extent using major axis lower bound
[Fri Aug 10 17:19:32 2012] Source does appear to be extended
[Fri Aug 10 17:19:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 17:19:41 2012] XMMSAS src. selection expression = ellipse(26252.739400, 29719.797200, 653.742019, 653.742019, 0.000000, X, Y)
[Fri Aug 10 17:19:41 2012] Writing source region out to fullrun_mos2_xmm0152570101_pi300-10000_pass1_cl_src16_src.reg
[Fri Aug 10 17:19:41 2012] Extracting stamp from image fullrun_mos2_xmm0152570101_pi300-10000_cl_sm2.00.img.gz, (265, 305) - (340, 380)
[Fri Aug 10 17:19:41 2012] XMMSAS bgd. selection expression = annulus(26252.739400, 29719.797200, 1089.570031, 2179.140063, X, Y) && !ellipse(26443.005310, 28087.549042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25413.454000, 27792.348000, 1113.008032, 1113.008032, 0.000000, X, Y) && !ellipse(24156.513060, 29023.280000, 304.620809, 304.620809, 0.000000, X, Y) && !ellipse(26004.806000, 27178.955536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27761.856000, 27935.870000, 2407.120069, 2407.120069, 0.000000, X, Y) && !ellipse(26387.553600, 31824.237600, 453.638413, 453.638413, 0.000000, X, Y) && !ellipse(26817.900000, 30259.830000, 2561.056074, 2561.056074, 0.000000, X, Y) && !ellipse(25625.163361, 29701.480286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26333.880000, 29558.349000, 1280.528037, 1280.528037, 0.000000, X, Y) && !ellipse(26571.004272, 28932.387329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24658.347717, 28404.110840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27319.485800, 28509.507200, 1203.560035, 1203.560035, 0.000000, X, Y) && !ellipse(23956.847000, 28188.736600, 576.196817, 510.711215, 102.975250, X, Y) && !ellipse(24231.318115, 27440.690979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26309.812000, 26712.588000, 2168.688062, 2168.688062, 0.000000, X, Y) && !ellipse(30067.506000, 25971.286000, 2772.064080, 2772.064080, 0.000000, X, Y)
[Fri Aug 10 17:19:41 2012] Writing fullrun_mos2_xmm0152570101_pi300-10000_pass1_cl_src16.gif
[Fri Aug 10 17:26:35 2012] Mean detx,y = (-1849.09, 628.47) 
[Fri Aug 10 17:26:36 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 10 17:26:48 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 10 17:26:48 2012] Setting source spectrum file to fullrun_mos2_xmm0152570101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Aug 10 17:26:48 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0152570101_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Sat Aug 11 01:06:59 2012] Updating aperture counts using extracted products
[Sat Aug 11 01:06:59 2012] Error reading totcts from fullrun_mos2_xmm0152570101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sat Aug 11 01:07:04 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 01:07:04 2012] Using photon index=1.80, rate=0.00237, arf fullrun_mos2_xmm0152570101_pi300-10000_pass1_cl_src16.arf
[Sat Aug 11 01:07:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 11 01:07:04 2012] Updating source flux to 2.8e-14
[Sat Aug 11 01:07:09 2012] Flag c found in src. 16 procflags, skipping spectral fitting