[Fri Aug 10 03:44:46 2012] Detection parameters:
  Position = (353.8, 407.1) = 11 2 20.28 -60 48 20.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 190.5 +/- 21.5
  Background counts = 72.3
  Rate = 0.005 +/- 0.0005

[Fri Aug 10 03:44:50 2012] Off-axis axis estimate = 8.84'
[Fri Aug 10 03:45:46 2012] Using EEF radius (= 10.85 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 03:45:46 2012] Initial guess for spatial extent in simple fitting = 10.85"
[Fri Aug 10 03:45:46 2012] source mask rpix=2.5, npix_max = 35, mask sum = 35, frac = 0.976
[Fri Aug 10 03:45:46 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 10.85"
[Fri Aug 10 10:01:19 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src14.ximg exists
[Fri Aug 10 10:01:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src14.csv
[Fri Aug 10 10:01:20 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src14_1.ximg exists
[Fri Aug 10 10:01:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src14.csv
[Fri Aug 10 10:01:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 10:01:22 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Fri Aug 10 10:01:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Fri Aug 10 10:01:22 2012] fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Fri Aug 10 10:01:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Fri Aug 10 10:01:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152570101_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 10:02:07 2012] Warning, spatial fit 14 centroid is now closest to src. 28
[Fri Aug 10 10:02:08 2012] Spatial fit model total counts = 1437.290000, observed total counts = 1430.000000
[Fri Aug 10 10:02:08 2012] Offset between fit and detection position for source 14 = 0.977846 pixels
[Fri Aug 10 10:02:08 2012] Warning, changing simple spatial fit ID from 14 to 30
[Fri Aug 10 10:02:08 2012] 1355.856200 total counts/ 1320.920000 bgd. counts: snr = 0.961252
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.977846 pixels
  Position = (353.0, 407.5) = 11 2 20.80 -60 48 18.8
  Extent = 5.7 (2.7-20.0)", rotation angle = 0
  Source counts = 34.9 +/- 36.8
  Background counts = 1320.9
  Rate = 0.0006 +/- 0.0006
  Deleting source due to low Poisson probability