[Thu Aug 30 19:50:40 2012] Detection parameters: Position = (490.0, 233.4) = 8 9 51.28 28 5 31.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 157.7 +/- 24.1 Background counts = 128.2 Rate = 0.005 +/- 0.0007 [Thu Aug 30 19:50:41 2012] Off-axis axis estimate = 14.67' [Thu Aug 30 19:53:15 2012] Using EEF radius (= 13.76 ")to estimate initial spatial extent for simple fitting [Thu Aug 30 19:53:15 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Thu Aug 30 19:53:15 2012] Initial guess for spatial extent in simple fitting = 13.76" [Thu Aug 30 19:53:15 2012] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.043 [Thu Aug 30 19:53:15 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 13.76" [Thu Aug 30 20:51:14 2012] fullrun_pn_xmm0152530101_pi300-10000_cl_pass0_src6.ximg exists [Thu Aug 30 20:51:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152530101_pi300-10000_cl_pass0_src6.csv [Thu Aug 30 20:51:14 2012] fullrun_pn_xmm0152530101_pi300-10000_cl_pass0_src6_1.ximg exists [Thu Aug 30 20:51:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152530101_pi300-10000_cl_pass0_src6.csv [Thu Aug 30 20:51:14 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0152530101_pi300-10000_cl_pass0_src6_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0152530101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Aug 30 20:51:14 2012] fullrun_pn_xmm0152530101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists [Thu Aug 30 20:51:14 2012] fullrun_pn_xmm0152530101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists [Thu Aug 30 20:51:14 2012] Fit fullrun_pn_xmm0152530101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly [Thu Aug 30 21:16:28 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 13.965908 pixels away [Thu Aug 30 21:16:28 2012] Vigneting correction estimate = 1.000000 [Thu Aug 30 21:16:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Aug 30 21:16:28 2012] Assessing source extent using major [Thu Aug 30 21:16:28 2012] Source does appear to be extended [Thu Aug 30 21:16:28 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Aug 30 21:16:37 2012] Using EEF radius (= 13.76 ")to estimate initial spatial extent for simple fitting [Thu Aug 30 21:16:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Thu Aug 30 21:16:37 2012] Initial guess for spatial extent in simple fitting = 13.76" [Thu Aug 30 21:16:37 2012] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.043 [Thu Aug 30 21:16:37 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 13.76" [Thu Aug 30 22:22:33 2012] fullrun_pn_xmm0152530101_pi300-10000_cl_pass1_src6.ximg exists [Thu Aug 30 22:22:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152530101_pi300-10000_cl_pass1_src6.csv [Thu Aug 30 22:22:33 2012] fullrun_pn_xmm0152530101_pi300-10000_cl_pass1_src6_1.ximg exists [Thu Aug 30 22:22:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152530101_pi300-10000_cl_pass1_src6.csv [Thu Aug 30 22:22:33 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0152530101_pi300-10000_cl_pass1_src6_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0152530101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Aug 30 22:22:33 2012] fullrun_pn_xmm0152530101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists [Thu Aug 30 22:22:33 2012] fullrun_pn_xmm0152530101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists [Thu Aug 30 22:22:33 2012] Fit fullrun_pn_xmm0152530101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly [Thu Aug 30 22:41:37 2012] Spatial fit model total counts = 290.998000, observed total counts = 291.000000 [Thu Aug 30 22:41:37 2012] Offset between fit and detection position for source 6 = 0.341415 pixels [Thu Aug 30 22:41:37 2012] 294.038900 total counts/ 247.167000 bgd. counts: snr = 2.981380 Spatial fit parameters: Offset between fit and detection position for source 6 = 0.341415 pixels Position = (489.9, 233.7) = 8 9 51.33 28 5 29.7 Extent = 5.2 (3.8-10.3)", rotation angle = 0 Source counts = 46.9 +/- 17.1 Background counts = 247.2 Rate = 0.003 +/- 0.001 [Thu Aug 30 22:41:37 2012] Vigneting correction estimate = 1.000000 [Thu Aug 30 22:41:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Aug 30 22:41:37 2012] Assessing source extent using major axis lower bound [Thu Aug 30 22:41:37 2012] Source does appear to be extended [Thu Aug 30 22:41:37 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Aug 30 22:41:46 2012] XMMSAS src. selection expression = ellipse(42570.542000, 20286.786600, 309.029409, 309.029409, 0.000000, X, Y) [Thu Aug 30 22:41:46 2012] Writing source region out to fullrun_pn_xmm0152530101_pi300-10000_pass1_cl_src6_src.reg [Thu Aug 30 22:41:46 2012] Extracting stamp from image fullrun_pn_xmm0152530101_pi300-10000_cl_sm2.00.img.gz, (472, 216) - (508, 251) [Thu Aug 30 22:41:46 2012] XMMSAS bgd. selection expression = annulus(42570.542000, 20286.786600, 515.049015, 1030.098030, X, Y) [Thu Aug 30 22:41:46 2012] Writing fullrun_pn_xmm0152530101_pi300-10000_pass1_cl_src6.gif [Thu Aug 30 22:47:17 2012] Mean detx,y = (-15667.92, -8305.33) [Thu Aug 30 22:47:18 2012] Setting backscal keywords in source and bgd. spectrum [Thu Aug 30 22:47:26 2012] grppha failed [Thu Aug 30 22:47:26 2012] Setting source spectrum file to fullrun_pn_xmm0152530101_pi300-10000_pass1_cl_src6_src.pi.gz [Thu Aug 30 22:47:26 2012] Setting bgd. spectrum file to fullrun_pn_xmm0152530101_pi300-10000_pass1_cl_src6_bgd.pi.gz [Thu Aug 30 23:10:11 2012] Not generating rmf since there are only 46 counts [Thu Aug 30 23:10:11 2012] rmf not generated due to insufficient counts [Thu Aug 30 23:21:25 2012] Updating aperture counts using extracted products [Thu Aug 30 23:21:25 2012] Error reading totcts from fullrun_pn_xmm0152530101_pi300-10000_pass1_cl_src6_src.pi.gz [Thu Aug 30 23:21:26 2012] No arf file for this source, not re-computing flux [Thu Aug 30 23:21:29 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting [Thu Aug 30 23:21:30 2012] xmm0152530101/analysis//spectral/fullrun_pn_xmm0152530101_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete