[Wed May 22 21:08:02 2013] Detection parameters:
  Position = (377.6, 365.8) = 10 57 53.72 -77 24 52.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.6 +/- 9.4
  Background counts = 6.7
  Rate = 0.003 +/- 0.0005

[Wed May 22 21:08:03 2013] Off-axis axis estimate = 7.54'
[Wed May 22 21:08:21 2013] Using EEF radius (= 10.20 ")to estimate initial spatial extent for simple fitting
[Wed May 22 21:08:21 2013] Initial guess for spatial extent in simple fitting = 10.20"
[Wed May 22 21:08:21 2013] source mask rpix=2.3, npix_max = 32, mask sum = 18, frac = 0.556
[Wed May 22 21:08:21 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 10.20"
[Wed May 22 21:08:21 2013] fullrun_mos2_xmm0152460301_pi300-10000_cl_pass0_src9.ximg exists
[Wed May 22 21:08:21 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0152460301_pi300-10000_cl_pass0_src9.csv
[Wed May 22 21:08:21 2013] fullrun_mos2_xmm0152460301_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed May 22 21:08:21 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0152460301_pi300-10000_cl_pass0_src9.csv
[Wed May 22 21:08:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152460301_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152460301_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 21:08:22 2013] fullrun_mos2_xmm0152460301_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed May 22 21:08:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152460301_pi300-10000_cl_pass0_tfrozen_src9.csv
[Wed May 22 21:08:22 2013] fullrun_mos2_xmm0152460301_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed May 22 21:08:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152460301_pi300-10000_cl_pass0_tfrozen_src9.csv
[Wed May 22 21:08:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152460301_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152460301_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 21:08:35 2013] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 14.379664 pixels away
[Wed May 22 21:08:35 2013] Vigneting correction estimate = 1.000000
[Wed May 22 21:08:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 21:08:35 2013] Assessing source extent using major
[Wed May 22 21:08:35 2013] Source does appear to be extended
[Wed May 22 21:08:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 21:08:46 2013] Using EEF radius (= 10.20 ")to estimate initial spatial extent for simple fitting
[Wed May 22 21:08:46 2013] Initial guess for spatial extent in simple fitting = 10.20"
[Wed May 22 21:08:46 2013] source mask rpix=2.3, npix_max = 32, mask sum = 18, frac = 0.556
[Wed May 22 21:08:46 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 10.20"
[Wed May 22 21:08:46 2013] fullrun_mos2_xmm0152460301_pi300-10000_cl_pass1_src9.ximg exists
[Wed May 22 21:08:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152460301_pi300-10000_cl_pass1_src9.csv
[Wed May 22 21:08:46 2013] fullrun_mos2_xmm0152460301_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed May 22 21:08:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152460301_pi300-10000_cl_pass1_src9.csv
[Wed May 22 21:08:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152460301_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152460301_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 21:08:47 2013] fullrun_mos2_xmm0152460301_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed May 22 21:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152460301_pi300-10000_cl_pass1_tfrozen_src9.csv
[Wed May 22 21:08:47 2013] fullrun_mos2_xmm0152460301_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed May 22 21:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152460301_pi300-10000_cl_pass1_tfrozen_src9.csv
[Wed May 22 21:08:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152460301_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152460301_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 21:08:59 2013] Spatial fit model total counts = 100.256000, observed total counts = 116.000000
[Wed May 22 21:08:59 2013] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 22 21:08:59 2013] Vigneting correction estimate = 1.000000
[Wed May 22 21:08:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 21:08:59 2013] Assessing source extent using major
[Wed May 22 21:08:59 2013] Source does appear to be extended
[Wed May 22 21:08:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 21:28:28 2013] XMMSAS src. selection expression = ellipse(32806.606079, 31780.354950, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 22 21:28:28 2013] Not overwriting source region fullrun_mos2_xmm0152460301_pi300-10000_pass1_cl_src12_src.reg
[Wed May 22 21:28:28 2013] Extracting stamp from image fullrun_mos2_xmm0152460301_pi300-10000_cl_sm2.00.img.gz, (340, 328) - (415, 403)
[Wed May 22 21:28:28 2013] XMMSAS bgd. selection expression = annulus(32806.606079, 31780.354950, 1087.500000, 2175.000000, X, Y) && !ellipse(34179.835400, 32176.396600, 490.714414, 490.714414, 0.000000, X, Y)
[Wed May 22 21:28:28 2013] Writing fullrun_mos2_xmm0152460301_pi300-10000_pass1_cl_src12.gif
[Wed May 22 21:28:28 2013] ../../xmm0152460301/products/events/fullrun_mos2_xmm0152460301_pi300-10000_pass1_cl_src12_src.evt and ../../xmm0152460301/products/events/fullrun_mos2_xmm0152460301_pi300-10000_pass1_cl_src12_bgd.evt exist, delete to re-create
[Wed May 22 21:28:28 2013] Mean detx,y = (-4555.07, -8591.90) 
[Wed May 22 21:28:28 2013] ../../xmm0152460301/products/images/fullrun_mos2_xmm0152460301_pi300-10000_pass1_cl_src12_src.img and ../../xmm0152460301/products/images/fullrun_mos2_xmm0152460301_pi300-10000_pass1_cl_src12_bgd.img exist, delete to re-create
[Wed May 22 21:28:28 2013] ../../xmm0152460301/products/spectra/fullrun_mos2_xmm0152460301_pi300-10000_pass1_cl_src12_src_b10.pi.gz and ../../xmm0152460301/products/spectra/fullrun_mos2_xmm0152460301_pi300-10000_pass1_cl_src12_bgd.pi exist, delete to re-create
[Wed May 22 21:28:28 2013] Setting source spectrum file to fullrun_mos2_xmm0152460301_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed May 22 21:28:28 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0152460301_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Wed May 22 21:28:28 2013] ../../xmm0152460301/products/lightcurves/fullrun_mos2_xmm0152460301_pi300-10000_pass1_cl_src12_src.lc and ../../xmm0152460301/products/lightcurves/fullrun_mos2_xmm0152460301_pi300-10000_pass1_cl_src12_bgd.lc exist, delete to re-create
[Wed May 22 21:28:31 2013] Not generating rmf since there are only 48 counts
[Wed May 22 21:28:31 2013] rmf not generated due to insufficient counts
[Wed May 22 21:28:31 2013] fullrun_mos2_xmm0152460301_pi300-10000_pass1_cl_src12.arf exists, delete to re-create
[Wed May 22 21:29:12 2013] Updating aperture counts using extracted products
[Wed May 22 21:29:12 2013] Total counts from fullrun_mos2_xmm0152460301_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 97.00
[Wed May 22 21:29:12 2013] Total counts from fullrun_mos2_xmm0152460301_pi300-10000_pass1_cl_src12_bgd.pi.gz = 388.00
[Wed May 22 21:29:12 2013] Got source and background scale factors 1250184.000000, 9715823.000000
[Wed May 22 21:29:12 2013] User source parameters:
  Position = (377.6, 365.8) = 10 57 53.72 -77 24 52.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 47.1 +/- 10.9
  Background aperture counts = 49.9
  Rate = 0.002 +/- 0.0004

[Wed May 22 21:29:12 2013] Updating counts from extracted products
[Wed May 22 21:29:12 2013] Set source signif. to 47.07/7.07 = 6.66
[Wed May 22 21:29:14 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 21:29:14 2013] Using photon index=1.80, rate=0.00155, arf fullrun_mos2_xmm0152460301_pi300-10000_pass1_cl_src12.arf
[Wed May 22 21:29:14 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 21:29:14 2013] Updating source flux to 2.6e-14
[Wed May 22 21:29:19 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 21:29:21 2013] xmm0152460301/analysis//spectral/fullrun_mos2_xmm0152460301_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete