[Wed May 22 21:08:01 2013] Detection parameters:
  Position = (393.5, 370.9) = 10 57 32.68 -77 24 30.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 171.5 +/- 16.2
  Background counts = 6.1
  Rate = 0.006 +/- 0.0005

[Wed May 22 21:08:02 2013] Off-axis axis estimate = 8.67'
[Wed May 22 21:08:20 2013] Using EEF radius (= 10.76 ")to estimate initial spatial extent for simple fitting
[Wed May 22 21:08:20 2013] Initial guess for spatial extent in simple fitting = 10.76"
[Wed May 22 21:08:20 2013] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.848
[Wed May 22 21:08:20 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 10.76"
[Wed May 22 21:08:20 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_src5.ximg exists
[Wed May 22 21:08:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_src5.csv
[Wed May 22 21:08:20 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed May 22 21:08:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_src5.csv
[Wed May 22 21:08:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 21:08:21 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed May 22 21:08:21 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed May 22 21:08:21 2013] Fit fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed May 22 21:08:31 2013] Spatial fit model total counts = 236.000000, observed total counts = 236.000000
[Wed May 22 21:08:31 2013] Offset between fit and detection position for source 4 = 0.242484 pixels
[Wed May 22 21:08:31 2013] 235.348000 total counts/ 126.004000 bgd. counts: snr = 9.740983
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.242484 pixels
  Position = (393.3, 371.0) = 10 57 32.98 -77 24 28.7
  Extent = 5.0 (4.2-6.1)", rotation angle = 0
  Source counts = 109.3 +/- 15.3
  Background counts = 126.0
  Rate = 0.004 +/- 0.0005
[Wed May 22 21:08:31 2013] Vigneting correction estimate = 1.000000
[Wed May 22 21:08:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 21:08:31 2013] Assessing source extent using major axis lower bound
[Wed May 22 21:08:31 2013] Source does appear to be extended
[Wed May 22 21:08:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 21:08:45 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 22 21:08:45 2013] Initial guess for spatial extent in simple fitting = 4.97"
[Wed May 22 21:08:45 2013] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.111
[Wed May 22 21:08:45 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 4.97"
[Wed May 22 21:08:46 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_src5.ximg exists
[Wed May 22 21:08:46 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_src5.csv
[Wed May 22 21:08:46 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed May 22 21:08:46 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_src5.csv
[Wed May 22 21:08:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 21:08:46 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed May 22 21:08:46 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed May 22 21:08:46 2013] Fit fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed May 22 21:08:55 2013] Spatial fit model total counts = 235.899000, observed total counts = 236.000000
[Wed May 22 21:08:55 2013] Offset between fit and detection position for source 4 = 0.014190 pixels
[Wed May 22 21:08:55 2013] 235.220000 total counts/ 125.324000 bgd. counts: snr = 9.816683
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.014190 pixels
  Position = (393.3, 371.0) = 10 57 32.97 -77 24 28.7
  Extent = 5.0 (4.2-6.1)", rotation angle = 0
  Source counts = 109.9 +/- 15.3
  Background counts = 125.3
  Rate = 0.004 +/- 0.0005
[Wed May 22 21:08:55 2013] Vigneting correction estimate = 1.000000
[Wed May 22 21:08:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 21:08:55 2013] Assessing source extent using major axis lower bound
[Wed May 22 21:08:55 2013] Source does appear to be extended
[Wed May 22 21:08:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 21:09:12 2013] XMMSAS src. selection expression = ellipse(34167.768400, 32228.714800, 302.080809, 302.080809, 0.000000, X, Y)
[Wed May 22 21:09:12 2013] Not overwriting source region fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src4_src.reg
[Wed May 22 21:09:12 2013] Extracting stamp from image fullrun_mos1_xmm0152460301_pi300-10000_cl_sm2.00.img.gz, (376, 354) - (411, 388)
[Wed May 22 21:09:12 2013] XMMSAS bgd. selection expression = annulus(34167.768400, 32228.714800, 503.468014, 1006.936029, X, Y) && !ellipse(32793.567230, 31674.475037, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 22 21:09:12 2013] Writing fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src4.gif
[Wed May 22 21:09:25 2013] Mean detx,y = (-9784.96, 4776.72) 
[Wed May 22 21:09:26 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 22 21:09:34 2013] Binned source spectrum to 10 counts/bin
[Wed May 22 21:09:34 2013] Setting source spectrum file to fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed May 22 21:09:34 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed May 22 21:29:08 2013] Updating aperture counts using extracted products
[Wed May 22 21:29:08 2013] Total counts from fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 127.00
[Wed May 22 21:29:08 2013] Total counts from fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src4_bgd.pi.gz = 94.00
[Wed May 22 21:29:08 2013] Got source and background scale factors 238820.000000, 2006284.000000
[Wed May 22 21:29:08 2013] User source parameters:
  Position = (393.3, 371.0) = 10 57 32.97 -77 24 28.7
  Extent = 5.0 (4.2-6.1)", rotation angle = 0
  Source aperture counts = 115.8 +/- 12.3
  Background aperture counts = 11.2
  Rate = 0.004 +/- 0.0004

[Wed May 22 21:29:10 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 21:29:10 2013] Using photon index=1.80, rate=0.00362, arf fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src4.arf
[Wed May 22 21:29:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 21:29:10 2013] Updating source flux to 9.1e-14
[Wed May 22 21:29:19 2013] xmm0152460301/analysis//spectral/fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete