[Wed May 22 21:08:01 2013] Detection parameters:
  Position = (327.3, 395.9) = 10 59 0.81 -77 22 42.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 794.5 +/- 34.0
  Background counts = 8.9
  Rate = 0.04 +/- 0.002

[Wed May 22 21:08:02 2013] Off-axis axis estimate = 7.37'
[Wed May 22 21:08:20 2013] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting
[Wed May 22 21:08:20 2013] Initial guess for spatial extent in simple fitting = 10.11"
[Wed May 22 21:08:20 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.128
[Wed May 22 21:08:20 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 10.11"
[Wed May 22 21:08:20 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_src3.ximg exists
[Wed May 22 21:08:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_src3.csv
[Wed May 22 21:08:20 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed May 22 21:08:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_src3.csv
[Wed May 22 21:08:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 21:08:21 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed May 22 21:08:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed May 22 21:08:21 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed May 22 21:08:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed May 22 21:08:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 21:08:31 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.838169 pixels away
[Wed May 22 21:08:31 2013] Vigneting correction estimate = 1.000000
[Wed May 22 21:08:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 21:08:31 2013] Assessing source extent using major
[Wed May 22 21:08:31 2013] Source does appear to be extended
[Wed May 22 21:08:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 21:08:45 2013] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting
[Wed May 22 21:08:45 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 22 21:08:45 2013] Initial guess for spatial extent in simple fitting = 10.11"
[Wed May 22 21:08:45 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.128
[Wed May 22 21:08:45 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 10.11"
[Wed May 22 21:08:46 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_src3.ximg exists
[Wed May 22 21:08:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_src3.csv
[Wed May 22 21:08:46 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed May 22 21:08:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_src3.csv
[Wed May 22 21:08:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 21:08:46 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed May 22 21:08:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed May 22 21:08:46 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed May 22 21:08:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed May 22 21:08:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 21:08:55 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 13.293625 pixels away
[Wed May 22 21:08:55 2013] Vigneting correction estimate = 1.000000
[Wed May 22 21:08:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 21:08:55 2013] Assessing source extent using major
[Wed May 22 21:08:55 2013] Source does appear to be extended
[Wed May 22 21:08:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 21:09:12 2013] XMMSAS src. selection expression = ellipse(28428.337982, 34392.781647, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 22 21:09:12 2013] Not overwriting source region fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src3_src.reg
[Wed May 22 21:09:12 2013] Extracting stamp from image fullrun_mos1_xmm0152460301_pi300-10000_cl_sm2.00.img.gz, (290, 358) - (365, 433)
[Wed May 22 21:09:12 2013] XMMSAS bgd. selection expression = annulus(28428.337982, 34392.781647, 1087.500000, 2175.000000, X, Y) && !ellipse(26502.788605, 36237.384491, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 22 21:09:12 2013] Writing fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src3.gif
[Wed May 22 21:09:13 2013] ../../xmm0152460301/products/events/fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0152460301/products/events/fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Wed May 22 21:09:13 2013] Mean detx,y = (-4073.50, 7053.96) 
[Wed May 22 21:09:13 2013] ../../xmm0152460301/products/images/fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src3_src.img and ../../xmm0152460301/products/images/fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Wed May 22 21:09:13 2013] ../../xmm0152460301/products/spectra/fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src3_src.pi and ../../xmm0152460301/products/spectra/fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Wed May 22 21:09:13 2013] Setting source spectrum file to fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src3_src.pi.gz
[Wed May 22 21:09:13 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed May 22 21:19:52 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 22 21:19:52 2013] rmf not generated due to insufficient counts
[Wed May 22 21:29:08 2013] Updating aperture counts using extracted products
[Wed May 22 21:29:08 2013] Total counts from fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src3_src.pi.gz = 756.00
[Wed May 22 21:29:08 2013] Total counts from fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src3_bgd.pi.gz = 406.00
[Wed May 22 21:29:08 2013] Got source and background scale factors 1.000000, 1.000000
[Wed May 22 21:29:08 2013] User source parameters:
  Position = (327.3, 395.9) = 10 59 0.81 -77 22 42.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 350.0 +/- 28.5
  Background aperture counts = 406.0
  Rate = 0.01 +/- 0.0009

[Wed May 22 21:29:08 2013] Updating counts from extracted products
[Wed May 22 21:29:08 2013] Set source signif. to 350.00/20.15 = 17.37
[Wed May 22 21:29:10 2013] No arf file for this source, not re-computing flux
[Wed May 22 21:29:16 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 21:29:19 2013] xmm0152460301/analysis//spectral/fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete