[Wed May 22 21:08:02 2013] Detection parameters:
  Position = (378.2, 204.0) = 10 57 51.33 -77 36 36.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.8 +/- 8.1
  Background counts = 7.1
  Rate = 0.001 +/- 0.0003

[Wed May 22 21:08:02 2013] Off-axis axis estimate = 8.96'
[Wed May 22 21:08:20 2013] Using EEF radius (= 10.91 ")to estimate initial spatial extent for simple fitting
[Wed May 22 21:08:20 2013] Initial guess for spatial extent in simple fitting = 10.91"
[Wed May 22 21:08:20 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.995
[Wed May 22 21:08:20 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 10.91"
[Wed May 22 21:08:21 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_src20.ximg exists
[Wed May 22 21:08:21 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_src20_1.ximg exists
[Wed May 22 21:08:21 2013] Fit fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_src20 appears to have run properly
[Wed May 22 21:08:21 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Wed May 22 21:08:21 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Wed May 22 21:08:21 2013] Fit fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Wed May 22 21:08:31 2013] Spatial fit model total counts = 88.496100, observed total counts = 88.000000
[Wed May 22 21:08:31 2013] Offset between fit and detection position for source 18 = 0.106276 pixels
[Wed May 22 21:08:31 2013] 87.779400 total counts/ 64.996900 bgd. counts: snr = 2.825889
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.106276 pixels
  Position = (378.3, 204.0) = 10 57 51.20 -77 36 35.7
  Extent = 9.8" x 2.9", rotation angle = 350
  Source counts = 22.8 +/- 9.4
  Background counts = 65.0
  Rate = 0.0008 +/- 0.0003
[Wed May 22 21:08:31 2013] Vigneting correction estimate = 1.000000
[Wed May 22 21:08:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 21:08:31 2013] Assessing source extent using major
[Wed May 22 21:08:31 2013] Source does appear to be extended
[Wed May 22 21:08:31 2013] Computing asymmetry using major and minor axis, asym = 3.34
[Wed May 22 21:08:31 2013] Source is asymmetric
[Wed May 22 21:08:45 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 22 21:08:45 2013] Initial guess for spatial extent in simple fitting = 6.36"
[Wed May 22 21:08:45 2013] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.040
[Wed May 22 21:08:45 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 6.36"
[Wed May 22 21:08:46 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_src18.ximg exists
[Wed May 22 21:08:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_src18.csv
[Wed May 22 21:08:46 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_src18_1.ximg exists
[Wed May 22 21:08:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_src18.csv
[Wed May 22 21:08:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 21:08:46 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Wed May 22 21:08:46 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Wed May 22 21:08:46 2013] Fit fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Wed May 22 21:08:55 2013] Spatial fit model total counts = 88.219600, observed total counts = 88.000000
[Wed May 22 21:08:55 2013] Offset between fit and detection position for source 18 = 0.221292 pixels
[Wed May 22 21:08:55 2013] 87.850600 total counts/ 63.419900 bgd. counts: snr = 3.067772
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.221292 pixels
  Position = (378.4, 204.2) = 10 57 51.04 -77 36 34.9
  Extent = 6.5 (4.2-9.9)", rotation angle = 0
  Source counts = 24.4 +/- 9.4
  Background counts = 63.4
  Rate = 0.0008 +/- 0.0003
[Wed May 22 21:08:55 2013] Vigneting correction estimate = 1.000000
[Wed May 22 21:08:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 21:08:55 2013] Assessing source extent using major axis lower bound
[Wed May 22 21:08:55 2013] Source does appear to be extended
[Wed May 22 21:08:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 21:09:12 2013] XMMSAS src. selection expression = ellipse(32874.764000, 17714.258600, 391.072811, 391.072811, 0.000000, X, Y)
[Wed May 22 21:09:12 2013] Not overwriting source region fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src18_src.reg
[Wed May 22 21:09:12 2013] Extracting stamp from image fullrun_mos1_xmm0152460301_pi300-10000_cl_sm2.00.img.gz, (356, 182) - (401, 227)
[Wed May 22 21:09:12 2013] XMMSAS bgd. selection expression = annulus(32874.764000, 17714.258600, 651.788019, 1303.576038, X, Y) && !ellipse(33840.989563, 16859.314651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31086.633340, 16955.803400, 540.326416, 321.292009, 218.330000, X, Y)
[Wed May 22 21:09:12 2013] Writing fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src18.gif
[Wed May 22 21:12:45 2013] Mean detx,y = (-8199.11, -9707.26) 
[Wed May 22 21:12:46 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 22 21:12:54 2013] Binned source spectrum to 10 counts/bin
[Wed May 22 21:12:54 2013] Setting source spectrum file to fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed May 22 21:12:54 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Wed May 22 21:28:22 2013] Not generating rmf since there are only 24 counts
[Wed May 22 21:28:22 2013] rmf not generated due to insufficient counts
[Wed May 22 21:29:10 2013] Updating aperture counts using extracted products
[Wed May 22 21:29:10 2013] Total counts from fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 38.00
[Wed May 22 21:29:10 2013] Total counts from fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src18_bgd.pi.gz = 91.00
[Wed May 22 21:29:10 2013] Got source and background scale factors 475200.000000, 3031964.000000
[Wed May 22 21:29:10 2013] User source parameters:
  Position = (378.4, 204.2) = 10 57 51.04 -77 36 34.9
  Extent = 6.5 (4.2-9.9)", rotation angle = 0
  Source aperture counts = 23.7 +/- 7.2
  Background aperture counts = 14.3
  Rate = 0.0008 +/- 0.0002

[Wed May 22 21:29:10 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 21:29:10 2013] Using photon index=1.80, rate=0.000805, arf fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src18.arf
[Wed May 22 21:29:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 21:29:10 2013] Updating source flux to 2.2e-14
[Wed May 22 21:29:16 2013] Source 18 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May 22 21:29:19 2013] xmm0152460301/analysis//spectral/fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete