[Wed May 22 21:08:01 2013] Detection parameters:
  Position = (149.7, 360.7) = 11 2 57.20 -77 25 10.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.8 +/- 9.9
  Background counts = 8.2
  Rate = 0.004 +/- 0.0006

[Wed May 22 21:08:02 2013] Off-axis axis estimate = 11.69'
[Wed May 22 21:08:20 2013] Using EEF radius (= 12.27 ")to estimate initial spatial extent for simple fitting
[Wed May 22 21:08:20 2013] Initial guess for spatial extent in simple fitting = 12.27"
[Wed May 22 21:08:20 2013] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.110
[Wed May 22 21:08:20 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 12.27"
[Wed May 22 21:08:20 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_src8.ximg exists
[Wed May 22 21:08:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_src8.csv
[Wed May 22 21:08:20 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_src8_1.ximg exists
[Wed May 22 21:08:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_src8.csv
[Wed May 22 21:08:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 21:08:21 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Wed May 22 21:08:21 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Wed May 22 21:08:21 2013] Fit fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Wed May 22 21:08:31 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 12.203478 pixels away
[Wed May 22 21:08:31 2013] Vigneting correction estimate = 1.000000
[Wed May 22 21:08:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 21:08:31 2013] Assessing source extent using major
[Wed May 22 21:08:31 2013] Source does appear to be extended
[Wed May 22 21:08:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 21:08:45 2013] Using EEF radius (= 12.27 ")to estimate initial spatial extent for simple fitting
[Wed May 22 21:08:45 2013] Initial guess for spatial extent in simple fitting = 12.27"
[Wed May 22 21:08:45 2013] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.110
[Wed May 22 21:08:45 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 12.27"
[Wed May 22 21:08:46 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_src8.ximg exists
[Wed May 22 21:08:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_src8.csv
[Wed May 22 21:08:46 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_src8_1.ximg exists
[Wed May 22 21:08:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_src8.csv
[Wed May 22 21:08:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 21:08:46 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Wed May 22 21:08:46 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Wed May 22 21:08:46 2013] Fit fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Wed May 22 21:08:55 2013] Spatial fit model total counts = 128.999000, observed total counts = 129.000000
[Wed May 22 21:08:55 2013] Offset between fit and detection position for source 13 = 0.217486 pixels
[Wed May 22 21:08:55 2013] 130.990400 total counts/ 92.596800 bgd. counts: snr = 3.989889
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.217486 pixels
  Position = (149.6, 360.5) = 11 2 57.32 -77 25 11.7
  Extent = 5.2 (4.2-6.8)", rotation angle = 0
  Source counts = 38.4 +/- 11.4
  Background counts = 92.6
  Rate = 0.001 +/- 0.0004
[Wed May 22 21:08:55 2013] Vigneting correction estimate = 1.000000
[Wed May 22 21:08:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 21:08:55 2013] Assessing source extent using major axis lower bound
[Wed May 22 21:08:55 2013] Source does appear to be extended
[Wed May 22 21:08:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 21:09:12 2013] XMMSAS src. selection expression = ellipse(12967.209040, 31313.509000, 309.355809, 309.355809, 0.000000, X, Y)
[Wed May 22 21:09:12 2013] Not overwriting source region fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src13_src.reg
[Wed May 22 21:09:12 2013] Extracting stamp from image fullrun_mos1_xmm0152460301_pi300-10000_cl_sm2.00.img.gz, (132, 343) - (167, 378)
[Wed May 22 21:09:12 2013] XMMSAS bgd. selection expression = annulus(12967.209040, 31313.509000, 515.593015, 1031.186030, X, Y)
[Wed May 22 21:09:12 2013] Writing fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src13.gif
[Wed May 22 21:10:05 2013] Mean detx,y = (11428.10, 4283.18) 
[Wed May 22 21:10:06 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 22 21:10:13 2013] Binned source spectrum to 10 counts/bin
[Wed May 22 21:10:14 2013] Setting source spectrum file to fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed May 22 21:10:14 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Wed May 22 21:27:17 2013] Not generating rmf since there are only 38 counts
[Wed May 22 21:27:17 2013] rmf not generated due to insufficient counts
[Wed May 22 21:29:09 2013] Updating aperture counts using extracted products
[Wed May 22 21:29:09 2013] Total counts from fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 50.00
[Wed May 22 21:29:09 2013] Total counts from fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src13_bgd.pi.gz = 119.00
[Wed May 22 21:29:09 2013] Got source and background scale factors 299200.000000, 2401244.000000
[Wed May 22 21:29:09 2013] User source parameters:
  Position = (149.6, 360.5) = 11 2 57.32 -77 25 11.7
  Extent = 5.2 (4.2-6.8)", rotation angle = 0
  Source aperture counts = 35.2 +/- 8.1
  Background aperture counts = 14.8
  Rate = 0.001 +/- 0.0003

[Wed May 22 21:29:10 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 21:29:10 2013] Using photon index=1.80, rate=0.00127, arf fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src13.arf
[Wed May 22 21:29:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 21:29:10 2013] Updating source flux to 3.1e-14
[Wed May 22 21:29:16 2013] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May 22 21:29:19 2013] xmm0152460301/analysis//spectral/fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete