[Wed May 22 21:08:01 2013] Detection parameters: Position = (137.8, 417.0) = 11 3 11.89 -77 21 4.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 114.9 +/- 13.8 Background counts = 7.2 Rate = 0.004 +/- 0.0005 [Wed May 22 21:08:02 2013] Off-axis axis estimate = 14.47' [Wed May 22 21:08:20 2013] Using EEF radius (= 13.67 ")to estimate initial spatial extent for simple fitting [Wed May 22 21:08:20 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed May 22 21:08:20 2013] Initial guess for spatial extent in simple fitting = 13.67" [Wed May 22 21:08:20 2013] source mask rpix=3.1, npix_max = 53, mask sum = 56, frac = 1.056 [Wed May 22 21:08:20 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 13.67" [Wed May 22 21:08:20 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_src7.ximg exists [Wed May 22 21:08:20 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_src7_1.ximg exists [Wed May 22 21:08:20 2013] Fit fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_src7 appears to have run properly [Wed May 22 21:08:21 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists [Wed May 22 21:08:21 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists [Wed May 22 21:08:21 2013] Fit fullrun_mos1_xmm0152460301_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly [Wed May 22 21:08:31 2013] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 17.551542 pixels away [Wed May 22 21:08:31 2013] Vigneting correction estimate = 1.000000 [Wed May 22 21:08:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 22 21:08:31 2013] Assessing source extent using major [Wed May 22 21:08:31 2013] Source does appear to be extended [Wed May 22 21:08:31 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 22 21:08:45 2013] Using EEF radius (= 13.67 ")to estimate initial spatial extent for simple fitting [Wed May 22 21:08:45 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed May 22 21:08:45 2013] Initial guess for spatial extent in simple fitting = 13.67" [Wed May 22 21:08:45 2013] source mask rpix=3.1, npix_max = 53, mask sum = 56, frac = 1.056 [Wed May 22 21:08:45 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 13.67" [Wed May 22 21:08:46 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_src7.ximg exists [Wed May 22 21:08:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_src7.csv [Wed May 22 21:08:46 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_src7_1.ximg exists [Wed May 22 21:08:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_src7.csv [Wed May 22 21:08:46 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_src7_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 22 21:08:46 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists [Wed May 22 21:08:46 2013] fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists [Wed May 22 21:08:46 2013] Fit fullrun_mos1_xmm0152460301_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly [Wed May 22 21:08:55 2013] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 16.451887 pixels away [Wed May 22 21:08:55 2013] Vigneting correction estimate = 1.000000 [Wed May 22 21:08:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 22 21:08:55 2013] Assessing source extent using major [Wed May 22 21:08:55 2013] Source does appear to be extended [Wed May 22 21:08:55 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 22 21:09:12 2013] XMMSAS src. selection expression = ellipse(11940.060440, 36227.292725, 652.500000, 652.500000, 0.000000, X, Y) [Wed May 22 21:09:12 2013] Not overwriting source region fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src10_src.reg [Wed May 22 21:09:12 2013] Extracting stamp from image fullrun_mos1_xmm0152460301_pi300-10000_cl_sm2.00.img.gz, (100, 379) - (175, 454) [Wed May 22 21:09:12 2013] XMMSAS bgd. selection expression = annulus(11940.060440, 36227.292725, 1087.500000, 2175.000000, X, Y) [Wed May 22 21:09:12 2013] Writing fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src10.gif [Wed May 22 21:09:48 2013] Mean detx,y = (12375.35, 9269.76) [Wed May 22 21:09:49 2013] Setting backscal keywords in source and bgd. spectrum [Wed May 22 21:10:03 2013] Binned source spectrum to 10 counts/bin [Wed May 22 21:10:03 2013] Setting source spectrum file to fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src10_src_b10.pi.gz [Wed May 22 21:10:03 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src10_bgd.pi.gz [Wed May 22 21:27:11 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed May 22 21:27:11 2013] rmf not generated due to insufficient counts [Wed May 22 21:29:08 2013] Updating aperture counts using extracted products [Wed May 22 21:29:08 2013] Total counts from fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 160.00 [Wed May 22 21:29:09 2013] Total counts from fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src10_bgd.pi.gz = 270.00 [Wed May 22 21:29:09 2013] Got source and background scale factors 1333580.000000, 7191257.000000 [Wed May 22 21:29:09 2013] User source parameters: Position = (137.8, 417.0) = 11 3 11.89 -77 21 4.7 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 109.9 +/- 13.7 Background aperture counts = 50.1 Rate = 0.004 +/- 0.0005 [Wed May 22 21:29:09 2013] Updating counts from extracted products [Wed May 22 21:29:09 2013] Set source signif. to 109.93/7.08 = 15.54 [Wed May 22 21:29:10 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 22 21:29:10 2013] Using photon index=1.80, rate=0.00362, arf fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src10.arf [Wed May 22 21:29:10 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 22 21:29:10 2013] Updating source flux to 8.9e-14 [Wed May 22 21:29:16 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 22 21:29:19 2013] xmm0152460301/analysis//spectral/fullrun_mos1_xmm0152460301_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete