[Mon May  6 12:21:27 2013] Detection parameters:
  Position = (224.7, 454.9) = 13 15 44.81 -16 32 34.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.9 +/- 11.1
  Background counts = 14.3
  Rate = 0.001 +/- 0.0003

[Mon May  6 12:21:28 2013] Off-axis axis estimate = 12.54'
[Mon May  6 12:21:50 2013] Using EEF radius (= 12.70 ")to estimate initial spatial extent for simple fitting
[Mon May  6 12:21:50 2013] Initial guess for spatial extent in simple fitting = 12.70"
[Mon May  6 12:21:50 2013] source mask rpix=2.9, npix_max = 46, mask sum = 31, frac = 0.663
[Mon May  6 12:21:50 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 12.70"
[Mon May  6 12:21:51 2013] fullrun_mos2_xmm0152360101_pi300-10000_cl_pass0_src21.ximg exists
[Mon May  6 12:21:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152360101_pi300-10000_cl_pass0_src21.csv
[Mon May  6 12:21:51 2013] fullrun_mos2_xmm0152360101_pi300-10000_cl_pass0_src21_1.ximg exists
[Mon May  6 12:21:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152360101_pi300-10000_cl_pass0_src21.csv
[Mon May  6 12:21:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152360101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152360101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 12:21:51 2013] fullrun_mos2_xmm0152360101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Mon May  6 12:21:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152360101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Mon May  6 12:21:51 2013] fullrun_mos2_xmm0152360101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Mon May  6 12:21:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152360101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Mon May  6 12:21:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152360101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152360101_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 12:22:08 2013] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 16.224123 pixels away
[Mon May  6 12:22:08 2013] Vigneting correction estimate = 1.000000
[Mon May  6 12:22:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 12:22:08 2013] Assessing source extent using major
[Mon May  6 12:22:08 2013] Source does appear to be extended
[Mon May  6 12:22:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  6 12:22:22 2013] Using EEF radius (= 12.70 ")to estimate initial spatial extent for simple fitting
[Mon May  6 12:22:22 2013] Initial guess for spatial extent in simple fitting = 12.70"
[Mon May  6 12:22:22 2013] source mask rpix=2.9, npix_max = 46, mask sum = 31, frac = 0.663
[Mon May  6 12:22:22 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 12.70"
[Mon May  6 12:22:22 2013] fullrun_mos2_xmm0152360101_pi300-10000_cl_pass1_src20.ximg exists
[Mon May  6 12:22:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152360101_pi300-10000_cl_pass1_src20.csv
[Mon May  6 12:22:22 2013] fullrun_mos2_xmm0152360101_pi300-10000_cl_pass1_src20_1.ximg exists
[Mon May  6 12:22:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152360101_pi300-10000_cl_pass1_src20.csv
[Mon May  6 12:22:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152360101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152360101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 12:22:23 2013] fullrun_mos2_xmm0152360101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Mon May  6 12:22:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152360101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Mon May  6 12:22:23 2013] fullrun_mos2_xmm0152360101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Mon May  6 12:22:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152360101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Mon May  6 12:22:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152360101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152360101_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 12:22:38 2013] Spatial fit model total counts = 250.824000, observed total counts = 219.000000
[Mon May  6 12:22:38 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May  6 12:22:38 2013] Vigneting correction estimate = 1.000000
[Mon May  6 12:22:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 12:22:38 2013] Assessing source extent using major
[Mon May  6 12:22:38 2013] Source does appear to be extended
[Mon May  6 12:22:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  6 12:23:07 2013] XMMSAS src. selection expression = ellipse(19500.035995, 39531.869629, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May  6 12:23:07 2013] Not overwriting source region fullrun_mos2_xmm0152360101_pi300-10000_pass1_cl_src4_src.reg
[Mon May  6 12:23:07 2013] Extracting stamp from image fullrun_mos2_xmm0152360101_pi300-10000_cl_sm2.00.img.gz, (187, 417) - (262, 492)
[Mon May  6 12:23:07 2013] XMMSAS bgd. selection expression = annulus(19500.035995, 39531.869629, 1087.500000, 2175.000000, X, Y) && !ellipse(23193.638000, 40736.662000, 2020.264058, 2020.264058, 0.000000, X, Y)
[Mon May  6 12:23:07 2013] Writing fullrun_mos2_xmm0152360101_pi300-10000_pass1_cl_src4.gif
[Mon May  6 12:23:08 2013] ../../xmm0152360101/products/events/fullrun_mos2_xmm0152360101_pi300-10000_pass1_cl_src4_src.evt and ../../xmm0152360101/products/events/fullrun_mos2_xmm0152360101_pi300-10000_pass1_cl_src4_bgd.evt exist, delete to re-create
[Mon May  6 12:23:08 2013] Mean detx,y = (226.73, -16628.51) 
[Mon May  6 12:23:08 2013] ../../xmm0152360101/products/images/fullrun_mos2_xmm0152360101_pi300-10000_pass1_cl_src4_src.img and ../../xmm0152360101/products/images/fullrun_mos2_xmm0152360101_pi300-10000_pass1_cl_src4_bgd.img exist, delete to re-create
[Mon May  6 12:23:08 2013] ../../xmm0152360101/products/spectra/fullrun_mos2_xmm0152360101_pi300-10000_pass1_cl_src4_src_b10.pi.gz and ../../xmm0152360101/products/spectra/fullrun_mos2_xmm0152360101_pi300-10000_pass1_cl_src4_bgd.pi exist, delete to re-create
[Mon May  6 12:23:08 2013] Setting source spectrum file to fullrun_mos2_xmm0152360101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon May  6 12:23:08 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0152360101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon May  6 12:23:08 2013] ../../xmm0152360101/products/lightcurves/fullrun_mos2_xmm0152360101_pi300-10000_pass1_cl_src4_src.lc and ../../xmm0152360101/products/lightcurves/fullrun_mos2_xmm0152360101_pi300-10000_pass1_cl_src4_bgd.lc exist, delete to re-create
[Mon May  6 12:29:20 2013] Not generating rmf since there are only 55 counts
[Mon May  6 12:29:20 2013] rmf not generated due to insufficient counts
[Mon May  6 12:31:00 2013] Updating aperture counts using extracted products
[Mon May  6 12:31:00 2013] Total counts from fullrun_mos2_xmm0152360101_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 147.00
[Mon May  6 12:31:00 2013] Total counts from fullrun_mos2_xmm0152360101_pi300-10000_pass1_cl_src4_bgd.pi.gz = 552.00
[Mon May  6 12:31:00 2013] Got source and background scale factors 1119034.000000, 6221745.000000
[Mon May  6 12:31:00 2013] User source parameters:
  Position = (224.7, 454.9) = 13 15 44.81 -16 32 34.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 47.7 +/- 13.2
  Background aperture counts = 99.3
  Rate = 0.001 +/- 0.0003

[Mon May  6 12:31:00 2013] Updating counts from extracted products
[Mon May  6 12:31:00 2013] Set source signif. to 47.72/9.96 = 4.79
[Mon May  6 12:31:02 2013] Calculating source flux in energy range 0.30-8.00
[Mon May  6 12:31:02 2013] Using photon index=1.80, rate=0.00123, arf fullrun_mos2_xmm0152360101_pi300-10000_pass1_cl_src4.arf
[Mon May  6 12:31:02 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  6 12:31:02 2013] Updating source flux to 3.7e-14
[Mon May  6 12:31:05 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May  6 12:31:07 2013] xmm0152360101/analysis//spectral/fullrun_mos2_xmm0152360101_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete