[Mon May  6 12:21:27 2013] Detection parameters:
  Position = (306.7, 358.0) = 13 15 20.01 -16 39 36.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.6 +/- 11.2
  Background counts = 12.9
  Rate = 0.002 +/- 0.0004

[Mon May  6 12:21:28 2013] Off-axis axis estimate = 4.36'
[Mon May  6 12:21:50 2013] Using EEF radius (= 8.61 ")to estimate initial spatial extent for simple fitting
[Mon May  6 12:21:50 2013] Initial guess for spatial extent in simple fitting = 8.61"
[Mon May  6 12:21:50 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.017
[Mon May  6 12:21:50 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 8.61"
[Mon May  6 12:21:51 2013] fullrun_mos2_xmm0152360101_pi300-10000_cl_pass0_src5.ximg exists
[Mon May  6 12:21:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152360101_pi300-10000_cl_pass0_src5.csv
[Mon May  6 12:21:51 2013] fullrun_mos2_xmm0152360101_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon May  6 12:21:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152360101_pi300-10000_cl_pass0_src5.csv
[Mon May  6 12:21:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152360101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152360101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 12:21:51 2013] fullrun_mos2_xmm0152360101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon May  6 12:21:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152360101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Mon May  6 12:21:51 2013] fullrun_mos2_xmm0152360101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon May  6 12:21:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152360101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Mon May  6 12:21:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152360101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152360101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 12:22:08 2013] Spatial fit model total counts = 234.838000, observed total counts = 180.000000
[Mon May  6 12:22:08 2013] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May  6 12:22:08 2013] Spatial fit model total counts = 304.567000, observed total counts = 238.000000
[Mon May  6 12:22:08 2013] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May  6 12:22:08 2013] Vigneting correction estimate = 1.000000
[Mon May  6 12:22:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 12:22:08 2013] Assessing source extent using major
[Mon May  6 12:22:08 2013] Source does appear to be extended
[Mon May  6 12:22:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  6 12:22:22 2013] Using EEF radius (= 8.61 ")to estimate initial spatial extent for simple fitting
[Mon May  6 12:22:22 2013] Initial guess for spatial extent in simple fitting = 8.61"
[Mon May  6 12:22:22 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.017
[Mon May  6 12:22:22 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 8.61"
[Mon May  6 12:22:22 2013] fullrun_mos2_xmm0152360101_pi300-10000_cl_pass1_src5.ximg exists
[Mon May  6 12:22:22 2013] fullrun_mos2_xmm0152360101_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon May  6 12:22:22 2013] Fit fullrun_mos2_xmm0152360101_pi300-10000_cl_pass1_src5 appears to have run properly
[Mon May  6 12:22:22 2013] fullrun_mos2_xmm0152360101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon May  6 12:22:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152360101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Mon May  6 12:22:22 2013] fullrun_mos2_xmm0152360101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon May  6 12:22:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152360101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Mon May  6 12:22:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152360101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152360101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 12:22:38 2013] Spatial fit model total counts = 183.801000, observed total counts = 180.000000
[Mon May  6 12:22:38 2013] Offset between fit and detection position for source 14 = 0.195616 pixels
[Mon May  6 12:22:38 2013] 183.442700 total counts/ 134.289000 bgd. counts: snr = 4.241661
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.195616 pixels
  Position = (306.5, 358.0) = 13 15 20.07 -16 39 36.1
  Extent = 5.6" x 5.6", rotation angle = 0
  Source counts = 49.2 +/- 13.5
  Background counts = 134.3
  Rate = 0.001 +/- 0.0003
[Mon May  6 12:22:38 2013] Vigneting correction estimate = 1.000000
[Mon May  6 12:22:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 12:22:38 2013] Assessing source extent using major
[Mon May  6 12:22:38 2013] Source does appear to be extended
[Mon May  6 12:22:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  6 12:23:07 2013] XMMSAS src. selection expression = ellipse(26614.588600, 31094.981400, 337.868410, 337.868410, 0.000000, X, Y)
[Mon May  6 12:23:07 2013] Not overwriting source region fullrun_mos2_xmm0152360101_pi300-10000_pass1_cl_src14_src.reg
[Mon May  6 12:23:07 2013] Extracting stamp from image fullrun_mos2_xmm0152360101_pi300-10000_cl_sm2.00.img.gz, (287, 339) - (326, 377)
[Mon May  6 12:23:07 2013] XMMSAS bgd. selection expression = annulus(26614.588600, 31094.981400, 563.114016, 1126.228032, X, Y) && !ellipse(27260.786194, 31528.990051, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May  6 12:23:07 2013] Writing fullrun_mos2_xmm0152360101_pi300-10000_pass1_cl_src14.gif
[Mon May  6 12:23:07 2013] ../../xmm0152360101/products/events/fullrun_mos2_xmm0152360101_pi300-10000_pass1_cl_src14_src.evt and ../../xmm0152360101/products/events/fullrun_mos2_xmm0152360101_pi300-10000_pass1_cl_src14_bgd.evt exist, delete to re-create
[Mon May  6 12:23:07 2013] Mean detx,y = (3735.58, -6196.49) 
[Mon May  6 12:23:07 2013] ../../xmm0152360101/products/images/fullrun_mos2_xmm0152360101_pi300-10000_pass1_cl_src14_src.img and ../../xmm0152360101/products/images/fullrun_mos2_xmm0152360101_pi300-10000_pass1_cl_src14_bgd.img exist, delete to re-create
[Mon May  6 12:23:07 2013] ../../xmm0152360101/products/spectra/fullrun_mos2_xmm0152360101_pi300-10000_pass1_cl_src14_src_b10.pi.gz and ../../xmm0152360101/products/spectra/fullrun_mos2_xmm0152360101_pi300-10000_pass1_cl_src14_bgd.pi exist, delete to re-create
[Mon May  6 12:23:07 2013] Setting source spectrum file to fullrun_mos2_xmm0152360101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Mon May  6 12:23:07 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0152360101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Mon May  6 12:23:07 2013] ../../xmm0152360101/products/lightcurves/fullrun_mos2_xmm0152360101_pi300-10000_pass1_cl_src14_src.lc and ../../xmm0152360101/products/lightcurves/fullrun_mos2_xmm0152360101_pi300-10000_pass1_cl_src14_bgd.lc exist, delete to re-create
[Mon May  6 12:24:18 2013] Not generating rmf since there are only 49 counts
[Mon May  6 12:24:18 2013] rmf not generated due to insufficient counts
[Mon May  6 12:30:58 2013] Updating aperture counts using extracted products
[Mon May  6 12:30:58 2013] Total counts from fullrun_mos2_xmm0152360101_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 78.00
[Mon May  6 12:30:58 2013] Total counts from fullrun_mos2_xmm0152360101_pi300-10000_pass1_cl_src14_bgd.pi.gz = 121.00
[Mon May  6 12:30:58 2013] Got source and background scale factors 358400.000000, 1687781.000000
[Mon May  6 12:30:58 2013] User source parameters:
  Position = (306.5, 358.0) = 13 15 20.07 -16 39 36.1
  Extent = 5.6" x 5.6", rotation angle = 0
  Source aperture counts = 52.3 +/- 9.9
  Background aperture counts = 25.7
  Rate = 0.001 +/- 0.0003

[Mon May  6 12:31:02 2013] Calculating source flux in energy range 0.30-8.00
[Mon May  6 12:31:02 2013] Using photon index=1.80, rate=0.00127, arf fullrun_mos2_xmm0152360101_pi300-10000_pass1_cl_src14.arf
[Mon May  6 12:31:02 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  6 12:31:02 2013] Updating source flux to 2.1e-14
[Mon May  6 12:31:05 2013] Flag p found in src. 14 procflags, skipping spectral fitting
[Mon May  6 12:31:05 2013] Source 14 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May  6 12:31:07 2013] xmm0152360101/analysis//spectral/fullrun_mos2_xmm0152360101_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete