[Sat Jul  7 18:01:21 2012] Detection parameters:
  Position = (298.6, 325.1) = 0 21 31.39 -48 37 28.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2356.8 +/- 57.9
  Background counts = 141.8
  Rate = 0.09 +/- 0.002

[Sat Jul  7 18:01:22 2012] Off-axis axis estimate = 1.93'
[Sat Jul  7 18:04:30 2012] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Sat Jul  7 18:04:30 2012] Initial guess for spatial extent in simple fitting = 7.39"
[Sat Jul  7 18:04:30 2012] source mask rpix=1.7, npix_max = 19, mask sum = 19, frac = 0.982
[Sat Jul  7 18:04:30 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.39"
[Sat Jul  7 18:37:07 2012] fullrun_pn_xmm0152330101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jul  7 18:37:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152330101_pi300-10000_cl_pass0_src1.csv
[Sat Jul  7 18:37:07 2012] fullrun_pn_xmm0152330101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jul  7 18:37:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152330101_pi300-10000_cl_pass0_src1.csv
[Sat Jul  7 18:37:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152330101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152330101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul  7 18:37:07 2012] fullrun_pn_xmm0152330101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jul  7 18:37:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152330101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jul  7 18:37:07 2012] fullrun_pn_xmm0152330101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jul  7 18:37:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152330101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jul  7 18:37:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152330101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152330101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul  7 19:29:52 2012] Spatial fit model total counts = 2789.240000, observed total counts = 1939.000000
[Sat Jul  7 19:29:52 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jul  7 19:29:52 2012] Vigneting correction estimate = 1.000000
[Sat Jul  7 19:29:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul  7 19:29:52 2012] Assessing source extent using major
[Sat Jul  7 19:29:52 2012] Source does appear to be extended
[Sat Jul  7 19:29:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul  7 19:30:08 2012] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Sat Jul  7 19:30:08 2012] Initial guess for spatial extent in simple fitting = 7.39"
[Sat Jul  7 19:30:08 2012] source mask rpix=1.7, npix_max = 19, mask sum = 19, frac = 0.982
[Sat Jul  7 19:30:08 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.39"
[Sat Jul  7 19:54:33 2012] fullrun_pn_xmm0152330101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jul  7 19:54:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152330101_pi300-10000_cl_pass1_src1.csv
[Sat Jul  7 19:54:33 2012] fullrun_pn_xmm0152330101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jul  7 19:54:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152330101_pi300-10000_cl_pass1_src1.csv
[Sat Jul  7 19:54:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152330101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152330101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul  7 19:54:34 2012] fullrun_pn_xmm0152330101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jul  7 19:54:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152330101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jul  7 19:54:34 2012] fullrun_pn_xmm0152330101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jul  7 19:54:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152330101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jul  7 19:54:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152330101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152330101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul  7 20:44:10 2012] Spatial fit model total counts = 2812.300000, observed total counts = 1939.000000
[Sat Jul  7 20:44:10 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jul  7 20:44:11 2012] Vigneting correction estimate = 1.000000
[Sat Jul  7 20:44:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul  7 20:44:11 2012] Assessing source extent using major
[Sat Jul  7 20:44:11 2012] Source does appear to be extended
[Sat Jul  7 20:44:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul  7 20:44:27 2012] Counts = 2356.840576, rescaling region sizes by 2.000000
[Sat Jul  7 20:44:27 2012] XMMSAS src. selection expression = ellipse(25925.781708, 28231.210022, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Jul  7 20:44:27 2012] Writing source region out to fullrun_pn_xmm0152330101_pi300-10000_pass1_cl_src1_src.reg
[Sat Jul  7 20:44:27 2012] Extracting stamp from image fullrun_pn_xmm0152330101_pi300-10000_cl_sm2.00.img.gz, (224, 250) - (374, 400)
[Sat Jul  7 20:44:27 2012] XMMSAS bgd. selection expression = annulus(25925.781708, 28231.210022, 4350.000000, 8700.000000, X, Y) && !ellipse(29352.726257, 31899.425049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17237.172280, 36621.635000, 553.760016, 553.760016, 0.000000, X, Y) && !ellipse(32898.703735, 37169.647583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31390.957733, 30659.040497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28634.566200, 27001.025560, 356.865610, 356.865610, 0.000000, X, Y) && !ellipse(19536.104568, 26679.547180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27357.619078, 25409.190600, 530.588015, 530.588015, 0.000000, X, Y) && !ellipse(33330.825684, 21210.559860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16865.680084, 19879.405167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28507.337940, 32560.432400, 317.351209, 317.351209, 0.000000, X, Y) && !ellipse(33524.685303, 31730.432434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30212.777863, 31130.602905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29413.791400, 28101.258400, 690.960820, 690.960820, 0.000000, X, Y) && !ellipse(35149.945557, 26785.820038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34413.273163, 22558.604523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30286.914246, 21810.145126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23562.553406, 20811.380188, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul  7 20:44:27 2012] Writing fullrun_pn_xmm0152330101_pi300-10000_pass1_cl_src1.gif
[Sat Jul  7 20:44:49 2012] Mean detx,y = (-1706.68, -715.05) 
[Sat Jul  7 20:44:56 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul  7 20:46:51 2012] Binned source spectrum to 10 counts/bin
[Sat Jul  7 20:46:51 2012] Setting source spectrum file to fullrun_pn_xmm0152330101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul  7 20:46:51 2012] Setting bgd. spectrum file to fullrun_pn_xmm0152330101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jul  7 21:05:12 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul  7 21:05:12 2012] rmf not generated due to insufficient counts
[Sat Jul  7 22:13:17 2012] Updating aperture counts using extracted products
[Sat Jul  7 22:13:17 2012] Error reading totcts from fullrun_pn_xmm0152330101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul  7 22:13:17 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul  7 22:13:17 2012] Using photon index=1.80, rate=0.0898, arf fullrun_pn_xmm0152330101_pi300-10000_pass1_cl_src1.arf
[Sat Jul  7 22:13:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul  7 22:13:17 2012] Updating source flux to 3.1e-13
[Sat Jul  7 22:14:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jul  7 22:14:45 2012] xmm0152330101/analysis//spectral/fullrun_pn_xmm0152330101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete