[Thu Dec  1 15:27:23 2011] Detection parameters:
  Position = (219.0, 270.2) = 20 51 20.82 45 18 58.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36.5 +/- 7.0
  Background counts = 3.0
  Rate = 0.01 +/- 0.002

[Thu Dec  1 15:27:23 2011] Off-axis axis estimate = 6.11'
[Thu Dec  1 15:38:34 2011] Using EEF radius (= 9.49 ")to estimate initial spatial extent for simple fitting
[Thu Dec  1 15:38:34 2011] Initial guess for spatial extent in simple fitting = 9.49"
[Thu Dec  1 15:38:34 2011] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.870
[Thu Dec  1 15:38:34 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 9.49"
[Thu Dec  1 15:42:06 2011] fullrun_mos1_xmm0152280501_pi300-10000_cl_pass0_src1.ximg exists
[Thu Dec  1 15:42:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152280501_pi300-10000_cl_pass0_src1.csv
[Thu Dec  1 15:42:06 2011] fullrun_mos1_xmm0152280501_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Dec  1 15:42:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152280501_pi300-10000_cl_pass0_src1.csv
[Thu Dec  1 15:42:06 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0152280501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0152280501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 15:42:06 2011] fullrun_mos1_xmm0152280501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Dec  1 15:42:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152280501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Dec  1 15:42:06 2011] fullrun_mos1_xmm0152280501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Dec  1 15:42:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0152280501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Dec  1 15:42:06 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0152280501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0152280501_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 15:47:35 2011] Spatial fit model total counts = 44.495700, observed total counts = 50.000000
[Thu Dec  1 15:47:35 2011] Offset between fit and detection position for source 2 = 0.322609 pixels
[Thu Dec  1 15:47:35 2011] 42.833000 total counts/ 10.995800 bgd. counts: snr = 9.601110
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.322609 pixels
  Position = (218.8, 270.0) = 20 51 20.89 45 18 56.6
  Extent = 6.9 (4.7-9.8)" x 4.4 (2.5-6.1)", rotation angle = 86 (59-113) degrees
  Source counts = 31.8 +/- 6.5
  Background counts = 11.0
  Rate = 0.005 +/- 0.001
[Thu Dec  1 15:47:35 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 15:47:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 15:47:35 2011] Assessing source extent using major axis lower bound
[Thu Dec  1 15:47:35 2011] Source does appear to be extended
[Thu Dec  1 15:47:35 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.77
[Thu Dec  1 15:59:53 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Dec  1 15:59:53 2011] Initial guess for spatial extent in simple fitting = 5.63"
[Thu Dec  1 15:59:53 2011] source mask rpix=1.3, npix_max = 12, mask sum = 15, frac = 1.165
[Thu Dec  1 15:59:53 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.63"
[Thu Dec  1 16:02:35 2011] fullrun_mos1_xmm0152280501_pi300-10000_cl_pass1_src1.ximg exists
[Thu Dec  1 16:02:35 2011] fullrun_mos1_xmm0152280501_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Dec  1 16:02:35 2011] Fit fullrun_mos1_xmm0152280501_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu Dec  1 16:02:35 2011] fullrun_mos1_xmm0152280501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Dec  1 16:02:35 2011] fullrun_mos1_xmm0152280501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Dec  1 16:02:35 2011] Fit fullrun_mos1_xmm0152280501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Dec  1 16:07:43 2011] Spatial fit model total counts = 46.429300, observed total counts = 49.000000
[Thu Dec  1 16:07:43 2011] Offset between fit and detection position for source 2 = 0.105349 pixels
[Thu Dec  1 16:07:43 2011] 44.805200 total counts/ 14.586200 bgd. counts: snr = 7.912414
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.105349 pixels
  Position = (218.9, 270.0) = 20 51 20.86 45 18 56.9
  Extent = 6.7 (4.8-9.7)" x 3.8 (2.6-6.3)", rotation angle = 262 (90-291) degrees
  Source counts = 30.2 +/- 6.7
  Background counts = 14.6
  Rate = 0.005 +/- 0.001
[Thu Dec  1 16:07:43 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 16:07:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 16:07:43 2011] Assessing source extent using major axis lower bound
[Thu Dec  1 16:07:43 2011] Source does appear to be extended
[Thu Dec  1 16:07:43 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.76
[Thu Dec  1 16:14:36 2011] XMMSAS src. selection expression = ellipse(18994.004800, 23445.272400, 399.196211, 228.802207, 261.609000, X, Y)
[Thu Dec  1 16:14:36 2011] Writing source region out to fullrun_mos1_xmm0152280501_pi300-10000_pass1_cl_src2_src.reg
[Thu Dec  1 16:14:36 2011] Extracting stamp from image fullrun_mos1_xmm0152280501_pi300-10000_cl_sm2.00.img.gz, (196, 247) - (242, 293)
[Thu Dec  1 16:14:36 2011] XMMSAS bgd. selection expression = annulus(18994.004800, 23445.272400, 665.327019, 1330.654038, X, Y)
[Thu Dec  1 16:14:36 2011] Writing fullrun_mos1_xmm0152280501_pi300-10000_pass1_cl_src2.gif
[Thu Dec  1 16:14:37 2011] Mean detx,y = (-6048.33, -7077.64) 
[Thu Dec  1 16:14:38 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec  1 16:14:48 2011] Binned source spectrum to 10 counts/bin
[Thu Dec  1 16:14:49 2011] Setting source spectrum file to fullrun_mos1_xmm0152280501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Dec  1 16:14:49 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0152280501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Dec  1 16:14:59 2011] Not generating rmf since there are only 30 counts
[Thu Dec  1 16:14:59 2011] rmf not generated due to insufficient counts
[Thu Dec  1 16:16:26 2011] Updating aperture counts using extracted products
[Thu Dec  1 16:16:26 2011] Error reading totcts from fullrun_mos1_xmm0152280501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Dec  1 16:16:26 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec  1 16:16:26 2011] Using photon index=1.80, rate=0.00472, arf fullrun_mos1_xmm0152280501_pi300-10000_pass1_cl_src2.arf
[Thu Dec  1 16:16:26 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec  1 16:16:26 2011] Updating source flux to 1.5e-13
[Thu Dec  1 16:16:26 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Dec  1 16:16:27 2011] xmm0152280501/analysis//spectral/fullrun_mos1_xmm0152280501_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete