[Sat Nov 26 02:39:54 2011] Detection parameters:
  Position = (323.4, 313.6) = 23 40 27.39 -11 42 11.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.9 +/- 15.8
  Background counts = 58.5
  Rate = 0.002 +/- 0.0004

[Sat Nov 26 02:39:55 2011] Off-axis axis estimate = 2.12'
[Sat Nov 26 02:45:42 2011] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 02:45:42 2011] Initial guess for spatial extent in simple fitting = 7.49"
[Sat Nov 26 02:45:42 2011] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.267
[Sat Nov 26 02:45:42 2011] Giving source the simple spatial ID 55 for pass 0, mean size = 7.49"
[Sat Nov 26 06:33:01 2011] fullrun_pn_xmm0152200101_pi300-10000_cl_pass0_src55.ximg exists
[Sat Nov 26 06:33:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152200101_pi300-10000_cl_pass0_src55.csv
[Sat Nov 26 06:33:01 2011] fullrun_pn_xmm0152200101_pi300-10000_cl_pass0_src55_1.ximg exists
[Sat Nov 26 06:33:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152200101_pi300-10000_cl_pass0_src55.csv
[Sat Nov 26 06:33:01 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152200101_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152200101_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 06:33:03 2011] fullrun_pn_xmm0152200101_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Sat Nov 26 06:33:03 2011] fullrun_pn_xmm0152200101_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Sat Nov 26 06:33:03 2011] Fit fullrun_pn_xmm0152200101_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly
[Sat Nov 26 11:19:26 2011] Source 55 is offset by 7.254461 and 6.484289 pixels which is larger than
2 X fitted extent = 0.860510 x 0.860510, not incorporating fit results
[Sat Nov 26 11:19:27 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 11:19:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 11:19:27 2011] Assessing source extent using major
[Sat Nov 26 11:19:27 2011] Source does appear to be extended
[Sat Nov 26 11:19:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 11:20:32 2011] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 11:20:32 2011] Initial guess for spatial extent in simple fitting = 7.49"
[Sat Nov 26 11:20:32 2011] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.267
[Sat Nov 26 11:20:32 2011] Giving source the simple spatial ID 55 for pass 1, mean size = 7.49"
[Sat Nov 26 15:12:00 2011] fullrun_pn_xmm0152200101_pi300-10000_cl_pass1_src55.ximg exists
[Sat Nov 26 15:12:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152200101_pi300-10000_cl_pass1_src55.csv
[Sat Nov 26 15:12:00 2011] fullrun_pn_xmm0152200101_pi300-10000_cl_pass1_src55_1.ximg exists
[Sat Nov 26 15:12:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152200101_pi300-10000_cl_pass1_src55.csv
[Sat Nov 26 15:12:00 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152200101_pi300-10000_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152200101_pi300-10000_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 15:12:02 2011] fullrun_pn_xmm0152200101_pi300-10000_cl_pass1_tfrozen_src55.ximg exists
[Sat Nov 26 15:12:03 2011] fullrun_pn_xmm0152200101_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists
[Sat Nov 26 15:12:03 2011] Fit fullrun_pn_xmm0152200101_pi300-10000_cl_pass1_tfrozen_src55 appears to have run properly
[Sat Nov 26 19:37:53 2011] Warning: source 51 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 55 at 17.618476 pixels away
[Sat Nov 26 19:37:53 2011] Warning: source 53 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 55 at 11.228698 pixels away
[Sat Nov 26 19:37:53 2011] Spatial fit model total counts = 768.492000, observed total counts = 767.000000
[Sat Nov 26 19:37:53 2011] Offset between fit and detection position for source 55 = 0.584175 pixels
[Sat Nov 26 19:37:53 2011] 722.011700 total counts/ 671.827000 bgd. counts: snr = 1.936166
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 0.584175 pixels
  Position = (323.1, 314.1) = 23 40 27.47 -11 42 11.1
  Extent = 4.8 (3.3-7.6)", rotation angle = 0
  Source counts = 50.2 +/- 26.9
  Background counts = 671.8
  Rate = 0.001 +/- 0.0006
[Sat Nov 26 19:37:53 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 19:37:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 19:37:53 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 19:37:53 2011] Source does appear to be extended
[Sat Nov 26 19:37:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 19:38:40 2011] XMMSAS src. selection expression = ellipse(28063.340660, 27280.825000, 290.149208, 290.149208, 0.000000, X, Y)
[Sat Nov 26 19:38:40 2011] Writing source region out to fullrun_pn_xmm0152200101_pi300-10000_pass1_cl_src55_src.reg
[Sat Nov 26 19:38:40 2011] Extracting stamp from image fullrun_pn_xmm0152200101_pi300-10000_cl_sm2.00.img.gz, (306, 297) - (340, 331)
[Sat Nov 26 19:38:40 2011] XMMSAS bgd. selection expression = annulus(28063.340660, 27280.825000, 483.582014, 967.164028, X, Y) && !ellipse(27231.313400, 26105.026800, 444.610413, 444.610413, 0.000000, X, Y) && !ellipse(26647.576000, 27910.722000, 1157.352033, 1157.352033, 0.000000, X, Y) && !ellipse(29764.056671, 27886.226135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26896.488940, 27667.503605, 1170.872034, 416.003674, 62.531758, X, Y) && !ellipse(29904.959400, 27488.974000, 1170.872034, 716.679221, 52.192000, X, Y)
[Sat Nov 26 19:38:40 2011] Writing fullrun_pn_xmm0152200101_pi300-10000_pass1_cl_src55.gif
[Sat Nov 26 20:30:13 2011] Mean detx,y = (430.45, -577.51) 
[Sat Nov 26 20:30:17 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Nov 26 20:30:41 2011] Binned source spectrum to 10 counts/bin
[Sat Nov 26 20:30:42 2011] Setting source spectrum file to fullrun_pn_xmm0152200101_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Sat Nov 26 20:30:42 2011] Setting bgd. spectrum file to fullrun_pn_xmm0152200101_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Sat Nov 26 22:00:52 2011] Not generating rmf since there are only 50 counts
[Sat Nov 26 22:00:52 2011] rmf not generated due to insufficient counts
[Sun Nov 27 01:39:18 2011] Updating aperture counts using extracted products
[Sun Nov 27 01:39:18 2011] Error reading totcts from fullrun_pn_xmm0152200101_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Sun Nov 27 01:39:23 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 01:39:23 2011] Using photon index=1.80, rate=0.0011, arf fullrun_pn_xmm0152200101_pi300-10000_pass1_cl_src55.arf
[Sun Nov 27 01:39:23 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Nov 27 01:39:23 2011] Updating source flux to 3.6e-15
[Sun Nov 27 01:43:58 2011] Flag b found in src. 55 procflags, skipping spectral fitting
[Sun Nov 27 01:43:58 2011] Source 55 has fewer than 100.000000 counts, skipping spectral fitting