[Mon May 13 06:53:19 2013] Detection parameters:
  Position = (307.5, 331.5) = 4 19 40.06 2 25 41.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 541.5 +/- 35.7
  Background counts = 257.8
  Rate = 0.02 +/- 0.002

[Mon May 13 06:53:22 2013] Off-axis axis estimate = 2.49'
[Mon May 13 06:53:54 2013] Using EEF radius (= 7.67 ")to estimate initial spatial extent for simple fitting
[Mon May 13 06:53:54 2013] Initial guess for spatial extent in simple fitting = 7.67"
[Mon May 13 06:53:54 2013] source mask rpix=1.8, npix_max = 20, mask sum = 21, frac = 1.025
[Mon May 13 06:53:54 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 7.67"
[Mon May 13 06:53:55 2013] fullrun_pn_xmm0152150101_pi300-10000_cl_pass0_src11.ximg exists
[Mon May 13 06:53:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152150101_pi300-10000_cl_pass0_src11.csv
[Mon May 13 06:53:55 2013] fullrun_pn_xmm0152150101_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon May 13 06:53:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152150101_pi300-10000_cl_pass0_src11.csv
[Mon May 13 06:53:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152150101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152150101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 06:53:56 2013] fullrun_pn_xmm0152150101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon May 13 06:53:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152150101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon May 13 06:53:56 2013] fullrun_pn_xmm0152150101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon May 13 06:53:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152150101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon May 13 06:53:56 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152150101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152150101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 06:54:18 2013] Source 11 is offset by 1.461852 and 6.065865 pixels which is larger than
2 X fitted extent = 7.080874 x 4.967596, not incorporating fit results
[Mon May 13 06:54:18 2013] Warning, spatial fit 11 centroid is now closest to src. 33
[Mon May 13 06:54:19 2013] Vigneting correction estimate = 1.000000
[Mon May 13 06:54:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 06:54:19 2013] Assessing source extent using major
[Mon May 13 06:54:19 2013] Source does appear to be extended
[Mon May 13 06:54:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 06:54:19 2013] Source is confused with source 10
[Mon May 13 06:54:46 2013] Using EEF radius (= 7.67 ")to estimate initial spatial extent for simple fitting
[Mon May 13 06:54:46 2013] Initial guess for spatial extent in simple fitting = 7.67"
[Mon May 13 06:54:46 2013] source mask rpix=1.8, npix_max = 20, mask sum = 21, frac = 1.025
[Mon May 13 06:54:46 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 7.67"
[Mon May 13 06:54:47 2013] fullrun_pn_xmm0152150101_pi300-10000_cl_pass1_src11.ximg exists
[Mon May 13 06:54:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152150101_pi300-10000_cl_pass1_src11.csv
[Mon May 13 06:54:47 2013] fullrun_pn_xmm0152150101_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon May 13 06:54:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152150101_pi300-10000_cl_pass1_src11.csv
[Mon May 13 06:54:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152150101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152150101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 06:54:48 2013] fullrun_pn_xmm0152150101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon May 13 06:54:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152150101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Mon May 13 06:54:48 2013] fullrun_pn_xmm0152150101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon May 13 06:54:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152150101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Mon May 13 06:54:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152150101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152150101_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 06:55:03 2013] Source 11 is offset by -0.689102 and 7.547081 pixels which is larger than
2 X fitted extent = 4.945747 x 5.313471, not incorporating fit results
[Mon May 13 06:55:03 2013] Warning, spatial fit 11 centroid is now closest to src. 33
[Mon May 13 06:55:03 2013] Source 11 is offset by -0.561769 and -3.442046 pixels which is larger than
2 X fitted extent = 1.127876 x 1.127876, not incorporating fit results
[Mon May 13 06:55:03 2013] Vigneting correction estimate = 1.000000
[Mon May 13 06:55:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 06:55:03 2013] Assessing source extent using major
[Mon May 13 06:55:03 2013] Source does appear to be extended
[Mon May 13 06:55:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 06:55:26 2013] XMMSAS src. selection expression = ellipse(26700.628113, 28795.040009, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 13 06:55:26 2013] Not overwriting source region fullrun_pn_xmm0152150101_pi300-10000_pass1_cl_src11_src.reg
[Mon May 13 06:55:26 2013] Extracting stamp from image fullrun_pn_xmm0152150101_pi300-10000_cl_sm2.00.img.gz, (270, 294) - (345, 369)
[Mon May 13 06:55:26 2013] XMMSAS bgd. selection expression = annulus(26700.628113, 28795.040009, 1087.500000, 2175.000000, X, Y) && !ellipse(27361.983820, 27371.436600, 2988.504086, 2988.504086, 0.000000, X, Y) && !ellipse(25778.695740, 28964.906128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27203.857056, 28755.501312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27726.173004, 28663.865631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28348.501251, 28532.231934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28938.146088, 28442.255646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30048.868000, 26885.624000, 1275.104037, 1275.104037, 0.000000, X, Y) && !ellipse(25397.356537, 26836.602783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28161.024323, 29875.424530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25954.086975, 29785.904907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28431.176208, 29390.748932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24866.417053, 28135.233368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24789.997345, 27367.858215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24014.619934, 26659.347717, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 13 06:55:26 2013] Writing fullrun_pn_xmm0152150101_pi300-10000_pass1_cl_src11.gif
[Mon May 13 06:55:28 2013] ../../xmm0152150101/products/events/fullrun_pn_xmm0152150101_pi300-10000_pass1_cl_src11_src.evt and ../../xmm0152150101/products/events/fullrun_pn_xmm0152150101_pi300-10000_pass1_cl_src11_bgd.evt exist, delete to re-create
[Mon May 13 06:55:29 2013] Mean detx,y = (-765.04, -1535.28) 
[Mon May 13 06:55:29 2013] ../../xmm0152150101/products/images/fullrun_pn_xmm0152150101_pi300-10000_pass1_cl_src11_src.img and ../../xmm0152150101/products/images/fullrun_pn_xmm0152150101_pi300-10000_pass1_cl_src11_bgd.img exist, delete to re-create
[Mon May 13 06:55:29 2013] ../../xmm0152150101/products/spectra/fullrun_pn_xmm0152150101_pi300-10000_pass1_cl_src11_src.pi and ../../xmm0152150101/products/spectra/fullrun_pn_xmm0152150101_pi300-10000_pass1_cl_src11_bgd.pi exist, delete to re-create
[Mon May 13 06:55:29 2013] Setting source spectrum file to fullrun_pn_xmm0152150101_pi300-10000_pass1_cl_src11_src.pi.gz
[Mon May 13 06:55:29 2013] Setting bgd. spectrum file to fullrun_pn_xmm0152150101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Mon May 13 06:55:29 2013] ../../xmm0152150101/products/lightcurves/fullrun_pn_xmm0152150101_pi300-10000_pass1_cl_src11_src.lc and ../../xmm0152150101/products/lightcurves/fullrun_pn_xmm0152150101_pi300-10000_pass1_cl_src11_bgd.lc exist, delete to re-create
[Mon May 13 06:55:41 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 13 06:55:41 2013] rmf not generated due to insufficient counts
[Mon May 13 08:43:39 2013] Updating aperture counts using extracted products
[Mon May 13 08:43:39 2013] Total counts from fullrun_pn_xmm0152150101_pi300-10000_pass1_cl_src11_src.pi.gz = 3219.00
[Mon May 13 08:43:39 2013] Total counts from fullrun_pn_xmm0152150101_pi300-10000_pass1_cl_src11_bgd.pi.gz = 1159.00
[Mon May 13 08:43:39 2013] Got source and background scale factors 1095670.000000, 1022354.000000
[Mon May 13 08:43:39 2013] User source parameters:
  Position = (307.5, 331.5) = 4 19 40.06 2 25 41.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1976.9 +/- 57.7
  Background aperture counts = 1242.1
  Rate = 0.09 +/- 0.003

[Mon May 13 08:43:39 2013] Updating counts from extracted products
[Mon May 13 08:43:39 2013] Set source signif. to 1976.88/35.24 = 56.09
[Mon May 13 08:43:44 2013] No arf file for this source, not re-computing flux
[Mon May 13 08:44:02 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 13 08:44:03 2013] xmm0152150101/analysis//spectral/fullrun_pn_xmm0152150101_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete