[Mon May 13 06:53:29 2013] Detection parameters:
  Position = (349.0, 466.7) = 4 19 28.00 2 35 33.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 823.8 +/- 35.6
  Background counts = 24.2
  Rate = 0.03 +/- 0.001

[Mon May 13 06:53:29 2013] Off-axis axis estimate = 12.74'
[Mon May 13 06:54:02 2013] Using EEF radius (= 12.80 ")to estimate initial spatial extent for simple fitting
[Mon May 13 06:54:02 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 13 06:54:02 2013] Initial guess for spatial extent in simple fitting = 12.80"
[Mon May 13 06:54:02 2013] source mask rpix=2.9, npix_max = 47, mask sum = 40, frac = 0.844
[Mon May 13 06:54:02 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 12.80"
[Mon May 13 06:54:03 2013] fullrun_mos2_xmm0152150101_pi300-10000_cl_pass0_src3.ximg exists
[Mon May 13 06:54:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152150101_pi300-10000_cl_pass0_src3.csv
[Mon May 13 06:54:03 2013] fullrun_mos2_xmm0152150101_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon May 13 06:54:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152150101_pi300-10000_cl_pass0_src3.csv
[Mon May 13 06:54:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152150101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152150101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 06:54:04 2013] fullrun_mos2_xmm0152150101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon May 13 06:54:04 2013] fullrun_mos2_xmm0152150101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon May 13 06:54:04 2013] Fit fullrun_mos2_xmm0152150101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon May 13 06:54:35 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 45 at 16.856489 pixels away
[Mon May 13 06:54:35 2013] Vigneting correction estimate = 1.000000
[Mon May 13 06:54:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 06:54:35 2013] Assessing source extent using major
[Mon May 13 06:54:35 2013] Source does appear to be extended
[Mon May 13 06:54:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 06:54:51 2013] Using EEF radius (= 12.80 ")to estimate initial spatial extent for simple fitting
[Mon May 13 06:54:51 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 13 06:54:51 2013] Initial guess for spatial extent in simple fitting = 12.80"
[Mon May 13 06:54:51 2013] source mask rpix=2.9, npix_max = 47, mask sum = 40, frac = 0.844
[Mon May 13 06:54:51 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 12.80"
[Mon May 13 06:54:51 2013] fullrun_mos2_xmm0152150101_pi300-10000_cl_pass1_src2.ximg exists
[Mon May 13 06:54:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152150101_pi300-10000_cl_pass1_src2.csv
[Mon May 13 06:54:51 2013] fullrun_mos2_xmm0152150101_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon May 13 06:54:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152150101_pi300-10000_cl_pass1_src2.csv
[Mon May 13 06:54:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152150101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152150101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 06:54:52 2013] fullrun_mos2_xmm0152150101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon May 13 06:54:52 2013] fullrun_mos2_xmm0152150101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon May 13 06:54:52 2013] Fit fullrun_mos2_xmm0152150101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Mon May 13 06:55:15 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 45 at 16.856489 pixels away
[Mon May 13 06:55:15 2013] Vigneting correction estimate = 1.000000
[Mon May 13 06:55:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 06:55:15 2013] Assessing source extent using major
[Mon May 13 06:55:15 2013] Source does appear to be extended
[Mon May 13 06:55:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 06:58:14 2013] XMMSAS src. selection expression = ellipse(30314.842499, 40553.955017, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 13 06:58:14 2013] Writing source region out to fullrun_mos2_xmm0152150101_pi300-10000_pass1_cl_src45_src.reg
[Mon May 13 06:58:14 2013] Extracting stamp from image fullrun_mos2_xmm0152150101_pi300-10000_cl_sm2.00.img.gz, (312, 429) - (387, 504)
[Mon May 13 06:58:14 2013] XMMSAS bgd. selection expression = annulus(30314.842499, 40553.955017, 1087.500000, 2175.000000, X, Y) && !ellipse(30528.508636, 38146.055847, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 13 06:58:14 2013] Writing fullrun_mos2_xmm0152150101_pi300-10000_pass1_cl_src45.gif
[Mon May 13 07:03:09 2013] Mean detx,y = (-461.17, 13563.19) 
[Mon May 13 07:03:10 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 07:03:27 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 07:03:27 2013] Setting source spectrum file to fullrun_mos2_xmm0152150101_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Mon May 13 07:03:27 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0152150101_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Mon May 13 07:15:22 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 13 07:15:22 2013] rmf not generated due to insufficient counts
[Mon May 13 08:43:48 2013] Updating aperture counts using extracted products
[Mon May 13 08:43:48 2013] Total counts from fullrun_mos2_xmm0152150101_pi300-10000_pass1_cl_src45_src_b10.pi.gz = 687.00
[Mon May 13 08:43:48 2013] Total counts from fullrun_mos2_xmm0152150101_pi300-10000_pass1_cl_src45_bgd.pi.gz = 649.00
[Mon May 13 08:43:48 2013] Got source and background scale factors 1216142.000000, 9924521.000000
[Mon May 13 08:43:48 2013] User source parameters:
  Position = (349.0, 466.7) = 4 19 28.00 2 35 33.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 607.5 +/- 27.2
  Background aperture counts = 79.5
  Rate = 0.02 +/- 0.001

[Mon May 13 08:43:48 2013] Updating counts from extracted products
[Mon May 13 08:43:48 2013] Set source signif. to 607.47/8.92 = 68.12
[Mon May 13 08:43:52 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 08:43:52 2013] Using photon index=1.80, rate=0.023, arf fullrun_mos2_xmm0152150101_pi300-10000_pass1_cl_src45.arf
[Mon May 13 08:43:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 08:43:52 2013] Updating source flux to 6.9e-13
[Mon May 13 08:43:56 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 13 08:44:02 2013] xmm0152150101/analysis//spectral/fullrun_mos2_xmm0152150101_pi300-10000_pass1_cl_src45_pl.csv not found, spectral fit skipped or did not complete