[Mon May 13 06:53:29 2013] Detection parameters:
  Position = (439.3, 267.3) = 4 19 1.78 2 21 6.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.7 +/- 15.3
  Background counts = 33.6
  Rate = 0.007 +/- 0.0009

[Mon May 13 06:53:29 2013] Off-axis axis estimate = 10.46'
[Mon May 13 06:54:02 2013] Using EEF radius (= 11.66 ")to estimate initial spatial extent for simple fitting
[Mon May 13 06:54:02 2013] Initial guess for spatial extent in simple fitting = 11.66"
[Mon May 13 06:54:02 2013] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.038
[Mon May 13 06:54:02 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 11.66"
[Mon May 13 06:54:03 2013] fullrun_mos2_xmm0152150101_pi300-10000_cl_pass0_src11.ximg exists
[Mon May 13 06:54:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152150101_pi300-10000_cl_pass0_src11.csv
[Mon May 13 06:54:03 2013] fullrun_mos2_xmm0152150101_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon May 13 06:54:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152150101_pi300-10000_cl_pass0_src11.csv
[Mon May 13 06:54:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152150101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152150101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 06:54:05 2013] fullrun_mos2_xmm0152150101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon May 13 06:54:05 2013] fullrun_mos2_xmm0152150101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon May 13 06:54:05 2013] Fit fullrun_mos2_xmm0152150101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Mon May 13 06:54:35 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 44 at 12.138023 pixels away
[Mon May 13 06:54:35 2013] Vigneting correction estimate = 1.000000
[Mon May 13 06:54:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 06:54:35 2013] Assessing source extent using major
[Mon May 13 06:54:35 2013] Source does appear to be extended
[Mon May 13 06:54:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 06:54:51 2013] Using EEF radius (= 11.66 ")to estimate initial spatial extent for simple fitting
[Mon May 13 06:54:51 2013] Initial guess for spatial extent in simple fitting = 11.66"
[Mon May 13 06:54:51 2013] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.038
[Mon May 13 06:54:51 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 11.66"
[Mon May 13 06:54:51 2013] fullrun_mos2_xmm0152150101_pi300-10000_cl_pass1_src9.ximg exists
[Mon May 13 06:54:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152150101_pi300-10000_cl_pass1_src9.csv
[Mon May 13 06:54:51 2013] fullrun_mos2_xmm0152150101_pi300-10000_cl_pass1_src9_1.ximg exists
[Mon May 13 06:54:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152150101_pi300-10000_cl_pass1_src9.csv
[Mon May 13 06:54:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152150101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152150101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 06:54:52 2013] fullrun_mos2_xmm0152150101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Mon May 13 06:54:52 2013] fullrun_mos2_xmm0152150101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Mon May 13 06:54:52 2013] Fit fullrun_mos2_xmm0152150101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Mon May 13 06:55:15 2013] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 44 at 14.921323 pixels away
[Mon May 13 06:55:15 2013] Vigneting correction estimate = 1.000000
[Mon May 13 06:55:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 06:55:15 2013] Assessing source extent using major
[Mon May 13 06:55:15 2013] Source does appear to be extended
[Mon May 13 06:55:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 06:58:14 2013] XMMSAS src. selection expression = ellipse(38174.727509, 23205.220978, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 13 06:58:14 2013] Writing source region out to fullrun_mos2_xmm0152150101_pi300-10000_pass1_cl_src44_src.reg
[Mon May 13 06:58:14 2013] Extracting stamp from image fullrun_mos2_xmm0152150101_pi300-10000_cl_sm2.00.img.gz, (402, 230) - (477, 305)
[Mon May 13 06:58:14 2013] XMMSAS bgd. selection expression = annulus(38174.727509, 23205.220978, 1087.500000, 2175.000000, X, Y)
[Mon May 13 06:58:14 2013] Writing fullrun_mos2_xmm0152150101_pi300-10000_pass1_cl_src44.gif
[Mon May 13 07:05:55 2013] Mean detx,y = (-11345.45, -2019.79) 
[Mon May 13 07:05:56 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 07:06:04 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 07:06:05 2013] Setting source spectrum file to fullrun_mos2_xmm0152150101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Mon May 13 07:06:05 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0152150101_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Mon May 13 08:01:23 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 13 08:01:23 2013] rmf not generated due to insufficient counts
[Mon May 13 08:43:49 2013] Updating aperture counts using extracted products
[Mon May 13 08:43:49 2013] Total counts from fullrun_mos2_xmm0152150101_pi300-10000_pass1_cl_src44_src_b10.pi.gz = 176.00
[Mon May 13 08:43:49 2013] Total counts from fullrun_mos2_xmm0152150101_pi300-10000_pass1_cl_src44_bgd.pi.gz = 973.00
[Mon May 13 08:43:49 2013] Got source and background scale factors 1334400.000000, 11163200.000000
[Mon May 13 08:43:49 2013] User source parameters:
  Position = (439.3, 267.3) = 4 19 1.78 2 21 6.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 59.7 +/- 14.3
  Background aperture counts = 116.3
  Rate = 0.002 +/- 0.0005

[Mon May 13 08:43:49 2013] Updating counts from extracted products
[Mon May 13 08:43:49 2013] Set source signif. to 59.69/10.78 = 5.53
[Mon May 13 08:43:52 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 08:43:52 2013] Using photon index=1.80, rate=0.00226, arf fullrun_mos2_xmm0152150101_pi300-10000_pass1_cl_src44.arf
[Mon May 13 08:43:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 08:43:52 2013] Updating source flux to 4.6e-14
[Mon May 13 08:43:56 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 13 08:44:02 2013] xmm0152150101/analysis//spectral/fullrun_mos2_xmm0152150101_pi300-10000_pass1_cl_src44_pl.csv not found, spectral fit skipped or did not complete