[Mon May 13 06:53:27 2013] Detection parameters:
  Position = (343.9, 314.9) = 4 19 29.49 2 24 33.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 130.0 +/- 22.0
  Background counts = 129.2
  Rate = 0.005 +/- 0.0008

[Mon May 13 06:53:29 2013] Off-axis axis estimate = 3.50'
[Mon May 13 06:54:02 2013] Using EEF radius (= 8.18 ")to estimate initial spatial extent for simple fitting
[Mon May 13 06:54:02 2013] Initial guess for spatial extent in simple fitting = 8.18"
[Mon May 13 06:54:02 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.103
[Mon May 13 06:54:02 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 8.18"
[Mon May 13 06:54:04 2013] fullrun_mos2_xmm0152150101_pi300-10000_cl_pass0_src17.ximg exists
[Mon May 13 06:54:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152150101_pi300-10000_cl_pass0_src17.csv
[Mon May 13 06:54:04 2013] fullrun_mos2_xmm0152150101_pi300-10000_cl_pass0_src17_1.ximg exists
[Mon May 13 06:54:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152150101_pi300-10000_cl_pass0_src17.csv
[Mon May 13 06:54:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152150101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152150101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 06:54:05 2013] fullrun_mos2_xmm0152150101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Mon May 13 06:54:05 2013] fullrun_mos2_xmm0152150101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Mon May 13 06:54:05 2013] Fit fullrun_mos2_xmm0152150101_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Mon May 13 06:54:35 2013] Source 24 is offset by -7.285897 and -5.399334 pixels which is larger than
2 X fitted extent = 0.940276 x 0.940276, not incorporating fit results
[Mon May 13 06:54:35 2013] Source 24 is offset by -3.675115 and -4.737725 pixels which is larger than
2 X fitted extent = 0.946529 x 0.946529, not incorporating fit results
[Mon May 13 06:54:35 2013] Vigneting correction estimate = 1.000000
[Mon May 13 06:54:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 06:54:35 2013] Assessing source extent using major
[Mon May 13 06:54:35 2013] Source does appear to be extended
[Mon May 13 06:54:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 06:54:35 2013] Source is confused with source 25
[Mon May 13 06:54:51 2013] Using EEF radius (= 8.18 ")to estimate initial spatial extent for simple fitting
[Mon May 13 06:54:51 2013] Initial guess for spatial extent in simple fitting = 8.18"
[Mon May 13 06:54:51 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.103
[Mon May 13 06:54:51 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 8.18"
[Mon May 13 06:54:52 2013] fullrun_mos2_xmm0152150101_pi300-10000_cl_pass1_src15.ximg exists
[Mon May 13 06:54:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152150101_pi300-10000_cl_pass1_src15.csv
[Mon May 13 06:54:52 2013] fullrun_mos2_xmm0152150101_pi300-10000_cl_pass1_src15_1.ximg exists
[Mon May 13 06:54:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152150101_pi300-10000_cl_pass1_src15.csv
[Mon May 13 06:54:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152150101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152150101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 06:54:52 2013] fullrun_mos2_xmm0152150101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Mon May 13 06:54:52 2013] fullrun_mos2_xmm0152150101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Mon May 13 06:54:52 2013] Fit fullrun_mos2_xmm0152150101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Mon May 13 06:55:15 2013] Warning, spatial fit 15 centroid is now closest to src. 17
[Mon May 13 06:55:15 2013] Spatial fit model total counts = 2223.410000, observed total counts = 2225.000000
[Mon May 13 06:55:15 2013] Offset between fit and detection position for source 24 = 7.375070 pixels
[Mon May 13 06:55:15 2013] Warning, changing simple spatial fit ID from 15 to 32
[Mon May 13 06:55:15 2013] 2176.982000 total counts/ 1802.460000 bgd. counts: snr = 8.821542
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 7.375070 pixels
  Position = (337.1, 312.0) = 4 19 31.46 2 24 20.1
  Extent = 28.7 (28.7-57.5)", rotation angle = 0
  Source counts = 374.5 +/- 46.7
  Background counts = 1802.5
  Rate = 0.01 +/- 0.002
[Mon May 13 06:55:15 2013] Vigneting correction estimate = 1.000000
[Mon May 13 06:55:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 06:55:15 2013] Assessing source extent using major axis lower bound
[Mon May 13 06:55:15 2013] Source does appear to be extended
[Mon May 13 06:55:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 06:58:14 2013] XMMSAS src. selection expression = ellipse(29278.876000, 27094.348600, 1724.904050, 1724.904050, 0.000000, X, Y)
[Mon May 13 06:58:14 2013] Writing source region out to fullrun_mos2_xmm0152150101_pi300-10000_pass1_cl_src24_src.reg
[Mon May 13 06:58:14 2013] Extracting stamp from image fullrun_mos2_xmm0152150101_pi300-10000_cl_sm2.00.img.gz, (238, 213) - (436, 411)
[Mon May 13 06:58:14 2013] XMMSAS bgd. selection expression = annulus(29278.876000, 27094.348600, 2874.840083, 5749.680165, X, Y) && !ellipse(27358.239600, 27340.301000, 1125.984032, 1125.984032, 0.000000, X, Y) && !ellipse(27243.060707, 27580.994000, 1839.695020, 1275.295109, 359.896031, X, Y) && !ellipse(25548.656200, 27908.109800, 1162.696033, 1162.696033, 0.000000, X, Y) && !ellipse(26415.410000, 28476.722000, 1222.224035, 1222.224035, 0.000000, X, Y) && !ellipse(28644.144000, 27036.996000, 2537.024073, 2537.024073, 0.000000, X, Y) && !ellipse(29072.341888, 26242.654144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28587.100769, 28465.858856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25572.155701, 26675.137177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26702.093689, 29528.340515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24855.927032, 27615.283051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28206.611176, 25547.108154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27269.927460, 29436.495087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25784.998779, 29162.559784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25261.742950, 26313.333679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26763.847015, 25272.397583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30403.154083, 26247.244690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29975.741800, 25720.456000, 1292.544037, 1292.544037, 0.000000, X, Y) && !ellipse(24432.917145, 26766.140961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24469.075989, 27440.640533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26159.371185, 24931.574127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30048.657800, 27102.230000, 1149.936033, 1149.936033, 0.000000, X, Y)
[Mon May 13 06:58:14 2013] Writing fullrun_mos2_xmm0152150101_pi300-10000_pass1_cl_src24.gif
[Mon May 13 07:07:22 2013] Mean detx,y = (-1458.29, 81.45) 
[Mon May 13 07:07:22 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 07:07:52 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 07:07:52 2013] Setting source spectrum file to fullrun_mos2_xmm0152150101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Mon May 13 07:07:52 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0152150101_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Mon May 13 08:43:50 2013] Updating aperture counts using extracted products
[Mon May 13 08:43:50 2013] Total counts from fullrun_mos2_xmm0152150101_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 11470.00
[Mon May 13 08:43:50 2013] Total counts from fullrun_mos2_xmm0152150101_pi300-10000_pass1_cl_src24_bgd.pi.gz = 17542.00
[Mon May 13 08:43:50 2013] Got source and background scale factors 9013200.000000, 61149112.000000
[Mon May 13 08:43:50 2013] User source parameters:
  Position = (337.1, 312.0) = 4 19 31.46 2 24 20.1
  Extent = 28.7 (28.7-57.5)", rotation angle = 0
  Source aperture counts = 8884.4 +/- 108.1
  Background aperture counts = 2585.6
  Rate = 0.3 +/- 0.004

[Mon May 13 08:43:52 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 08:43:52 2013] Using photon index=1.80, rate=0.0142, arf fullrun_mos2_xmm0152150101_pi300-10000_pass1_cl_src24.arf
[Mon May 13 08:43:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 08:43:52 2013] Updating source flux to 1.4e-13
[Mon May 13 08:43:56 2013] Flag b found in src. 24 procflags, skipping spectral fitting
[Mon May 13 08:43:56 2013] Flag c found in src. 24 procflags, skipping spectral fitting
[Mon May 13 08:44:02 2013] xmm0152150101/analysis//spectral/fullrun_mos2_xmm0152150101_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete