[Tue Jul  3 14:33:09 2012] Detection parameters:
  Position = (104.1, 335.8) = 13 26 31.91 -57 35 26.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 28.0 +/- 6.8
  Background counts = 3.6
  Rate = 0.008 +/- 0.002

[Tue Jul  3 14:33:09 2012] Off-axis axis estimate = 14.35'
[Tue Jul  3 14:34:42 2012] Using EEF radius (= 13.60 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 14:34:42 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul  3 14:34:42 2012] Initial guess for spatial extent in simple fitting = 13.60"
[Tue Jul  3 14:34:42 2012] source mask rpix=3.1, npix_max = 52, mask sum = 44, frac = 0.836
[Tue Jul  3 14:34:42 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 13.60"
[Tue Jul  3 15:00:44 2012] fullrun_pn_xmm0152131201_pi300-10000_cl_pass0_src4.ximg exists
[Tue Jul  3 15:00:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152131201_pi300-10000_cl_pass0_src4.csv
[Tue Jul  3 15:00:44 2012] fullrun_pn_xmm0152131201_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Jul  3 15:00:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152131201_pi300-10000_cl_pass0_src4.csv
[Tue Jul  3 15:00:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152131201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152131201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 15:00:45 2012] fullrun_pn_xmm0152131201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Jul  3 15:00:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152131201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue Jul  3 15:00:45 2012] fullrun_pn_xmm0152131201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Jul  3 15:00:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152131201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue Jul  3 15:00:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152131201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152131201_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 16:33:57 2012] Spatial fit model total counts = 73.941700, observed total counts = 65.000000
[Tue Jul  3 16:33:57 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul  3 16:33:57 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 16:33:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 16:33:57 2012] Assessing source extent using major
[Tue Jul  3 16:33:57 2012] Source does appear to be extended
[Tue Jul  3 16:33:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 16:33:57 2012] Deleting source due to low Poisson probability 0.8