[Tue Jul  3 14:33:52 2012] Detection parameters:
  Position = (306.3, 297.1) = 13 24 42.49 -57 38 18.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.9 +/- 15.6
  Background counts = 49.4
  Rate = 0.008 +/- 0.002

[Tue Jul  3 14:33:52 2012] Off-axis axis estimate = 0.58'
[Tue Jul  3 15:39:18 2012] Using EEF radius (= 6.72 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 15:39:18 2012] Initial guess for spatial extent in simple fitting = 6.72"
[Tue Jul  3 15:39:18 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.957
[Tue Jul  3 15:39:18 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 6.72"
[Tue Jul  3 16:33:54 2012] fullrun_mos2_xmm0152131201_pi300-10000_cl_pass0_src16.ximg exists
[Tue Jul  3 16:33:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152131201_pi300-10000_cl_pass0_src16.csv
[Tue Jul  3 16:33:54 2012] fullrun_mos2_xmm0152131201_pi300-10000_cl_pass0_src16_1.ximg exists
[Tue Jul  3 16:33:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152131201_pi300-10000_cl_pass0_src16.csv
[Tue Jul  3 16:33:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152131201_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152131201_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 16:33:54 2012] fullrun_mos2_xmm0152131201_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Tue Jul  3 16:33:54 2012] fullrun_mos2_xmm0152131201_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Tue Jul  3 16:33:54 2012] Fit fullrun_mos2_xmm0152131201_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Tue Jul  3 16:34:02 2012] Spatial fit model total counts = 1052.520000, observed total counts = 1044.000000
[Tue Jul  3 16:34:02 2012] Offset between fit and detection position for source 20 = 0.350398 pixels
[Tue Jul  3 16:34:02 2012] Warning, changing simple spatial fit ID from 16 to 13
[Tue Jul  3 16:34:02 2012] 1042.698500 total counts/ 993.030000 bgd. counts: snr = 1.576158
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.350398 pixels
  Position = (306.2, 296.8) = 13 24 42.53 -57 38 20.9
  Extent = 7.8 (4.5-13.5)", rotation angle = 0
  Source counts = 49.7 +/- 32.3
  Background counts = 993.0
  Rate = 0.005 +/- 0.003
  Deleting source due to low Poisson probability