[Tue Jul  3 14:33:52 2012] Detection parameters:
  Position = (298.3, 322.0) = 13 24 46.82 -57 36 31.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1152.0 +/- 42.4
  Background counts = 63.3
  Rate = 0.1 +/- 0.005

[Tue Jul  3 14:33:52 2012] Off-axis axis estimate = 1.71'
[Tue Jul  3 15:39:18 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 15:39:18 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Tue Jul  3 15:39:18 2012] source mask rpix=1.7, npix_max = 18, mask sum = 14, frac = 0.740
[Tue Jul  3 15:39:18 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Tue Jul  3 16:33:54 2012] fullrun_mos2_xmm0152131201_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jul  3 16:33:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152131201_pi300-10000_cl_pass0_src1.csv
[Tue Jul  3 16:33:54 2012] fullrun_mos2_xmm0152131201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jul  3 16:33:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152131201_pi300-10000_cl_pass0_src1.csv
[Tue Jul  3 16:33:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152131201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152131201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 16:33:54 2012] fullrun_mos2_xmm0152131201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jul  3 16:33:54 2012] fullrun_mos2_xmm0152131201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jul  3 16:33:54 2012] Fit fullrun_mos2_xmm0152131201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jul  3 16:34:02 2012] Spatial fit model total counts = 3102.550000, observed total counts = 2933.000000
[Tue Jul  3 16:34:02 2012] Offset between fit and detection position for source 2 = 0.035889 pixels
[Tue Jul  3 16:34:02 2012] 3041.576000 total counts/ 2376.910000 bgd. counts: snr = 13.633178
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.035889 pixels
  Position = (298.2, 322.0) = 13 24 46.85 -57 36 31.1
  Extent = 8.5 (7.4-9.2)", rotation angle = 0
  Source counts = 664.7 +/- 55.2
  Background counts = 2376.9
  Rate = 0.07 +/- 0.006
[Tue Jul  3 16:34:02 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 16:34:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 16:34:02 2012] Assessing source extent using major axis lower bound
[Tue Jul  3 16:34:02 2012] Source does appear to be extended
[Tue Jul  3 16:34:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 16:34:02 2012] Source is confused with source 1
[Tue Jul  3 17:47:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul  3 17:47:49 2012] Initial guess for spatial extent in simple fitting = 8.49"
[Tue Jul  3 17:47:49 2012] source mask rpix=2.0, npix_max = 24, mask sum = 18, frac = 0.749
[Tue Jul  3 17:47:49 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.49"
[Tue Jul  3 18:33:04 2012] fullrun_mos2_xmm0152131201_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jul  3 18:33:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152131201_pi300-10000_cl_pass1_src1.csv
[Tue Jul  3 18:33:04 2012] fullrun_mos2_xmm0152131201_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jul  3 18:33:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152131201_pi300-10000_cl_pass1_src1.csv
[Tue Jul  3 18:33:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152131201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152131201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 18:33:04 2012] fullrun_mos2_xmm0152131201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jul  3 18:33:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152131201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jul  3 18:33:04 2012] fullrun_mos2_xmm0152131201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jul  3 18:33:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152131201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jul  3 18:33:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152131201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152131201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 18:33:13 2012] Warning, spatial fit 1 centroid is now closest to src. 7
[Tue Jul  3 18:33:13 2012] Spatial fit model total counts = 2243.300000, observed total counts = 1979.000000
[Tue Jul  3 18:33:13 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul  3 18:33:13 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 18:33:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 18:33:13 2012] Assessing source extent using major axis lower bound
[Tue Jul  3 18:33:13 2012] Source does appear to be extended
[Tue Jul  3 18:33:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 19:27:24 2012] XMMSAS src. selection expression = ellipse(25898.523400, 27968.609600, 509.128815, 509.128815, 0.000000, X, Y)
[Tue Jul  3 19:27:24 2012] Writing source region out to fullrun_mos2_xmm0152131201_pi300-10000_pass1_cl_src2_src.reg
[Tue Jul  3 19:27:24 2012] Extracting stamp from image fullrun_mos2_xmm0152131201_pi300-10000_cl_sm2.00.img.gz, (269, 293) - (328, 351)
[Tue Jul  3 19:27:24 2012] XMMSAS bgd. selection expression = annulus(25898.523400, 27968.609600, 848.548024, 1697.096049, X, Y) && !ellipse(25513.052000, 27664.470000, 1175.384034, 798.080023, 110.674000, X, Y) && !ellipse(26542.685730, 28509.082733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26161.872223, 26750.078033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26880.097473, 26849.559326, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26486.852000, 28989.234000, 1110.928032, 1110.928032, 0.000000, X, Y) && !ellipse(24046.315674, 27525.269592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27283.627411, 28130.273773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27620.364777, 26963.807892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24870.222000, 27081.380000, 1144.552033, 1144.552033, 0.000000, X, Y) && !ellipse(24625.005859, 28059.379181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27636.664001, 27442.387543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26602.824799, 26211.555786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25224.418549, 29232.206512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25382.466000, 26496.878000, 2152.384062, 2152.384062, 0.000000, X, Y) && !ellipse(24711.190765, 26676.730194, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul  3 19:27:24 2012] Writing fullrun_mos2_xmm0152131201_pi300-10000_pass1_cl_src2.gif
[Tue Jul  3 19:27:26 2012] Mean detx,y = (2.61, 49.73) 
[Tue Jul  3 19:27:26 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul  3 19:27:31 2012] Binned source spectrum to 10 counts/bin
[Tue Jul  3 19:27:31 2012] Setting source spectrum file to fullrun_mos2_xmm0152131201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jul  3 19:27:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0152131201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Jul  3 19:51:44 2012] Updating aperture counts using extracted products
[Tue Jul  3 19:51:44 2012] Error reading totcts from fullrun_mos2_xmm0152131201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jul  3 19:51:44 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul  3 19:51:44 2012] Using photon index=1.80, rate=0.0693, arf fullrun_mos2_xmm0152131201_pi300-10000_pass1_cl_src2.arf
[Tue Jul  3 19:51:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul  3 19:51:44 2012] Updating source flux to 8.1e-13
[Tue Jul  3 19:52:15 2012] Flag p found in src. 2 procflags, skipping spectral fitting
[Tue Jul  3 19:52:15 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Tue Jul  3 19:53:02 2012] Reading fit data from xmm0152131201/analysis//spectral/fullrun_mos2_xmm0152131201_pi300-10000_pass1_cl_src2_pl.csv
[Tue Jul  3 19:53:02 2012] Spectral fit parameter nH value = 7.90937e+21
[Tue Jul  3 19:53:02 2012] Spectral fit parameter PhoIndex value = 3.00632
[Tue Jul  3 19:53:02 2012] Failed to get F(0.3-8.0) from xmm0152131201/analysis//spectral/fullrun_mos2_xmm0152131201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Jul  3 19:53:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul  3 19:53:02 2012] Using Nh = 7.9e+21, photon index=3.01, rate=0.0693, arf fullrun_mos2_xmm0152131201_pi300-10000_pass1_cl_src2.arf
[Tue Jul  3 19:53:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul  3 19:53:02 2012] Updating source flux to 7.9e-13