[Thu Feb 16 01:43:43 2012] Detection parameters:
  Position = (241.1, 280.0) = 14 10 50.22 -42 46 25.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.9 +/- 14.1
  Background counts = 33.2
  Rate = 0.02 +/- 0.002

[Thu Feb 16 01:43:43 2012] Off-axis axis estimate = 4.37'
[Thu Feb 16 01:45:16 2012] Using EEF radius (= 8.61 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 01:45:16 2012] Initial guess for spatial extent in simple fitting = 8.61"
[Thu Feb 16 01:45:16 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.813
[Thu Feb 16 01:45:16 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 8.61"
[Thu Feb 16 03:57:42 2012] fullrun_pn_xmm0152130401_pi300-10000_cl_pass0_src20.ximg exists
[Thu Feb 16 03:57:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152130401_pi300-10000_cl_pass0_src20.csv
[Thu Feb 16 03:57:42 2012] fullrun_pn_xmm0152130401_pi300-10000_cl_pass0_src20_1.ximg exists
[Thu Feb 16 03:57:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152130401_pi300-10000_cl_pass0_src20.csv
[Thu Feb 16 03:57:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152130401_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152130401_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 03:57:43 2012] fullrun_pn_xmm0152130401_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Thu Feb 16 03:57:43 2012] fullrun_pn_xmm0152130401_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Thu Feb 16 03:57:43 2012] Fit fullrun_pn_xmm0152130401_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Thu Feb 16 06:20:24 2012] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 10.442311 pixels away
[Thu Feb 16 06:20:25 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 06:20:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 06:20:25 2012] Assessing source extent using major
[Thu Feb 16 06:20:25 2012] Source does appear to be extended
[Thu Feb 16 06:20:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 06:20:44 2012] Using EEF radius (= 8.61 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 06:20:44 2012] Initial guess for spatial extent in simple fitting = 8.61"
[Thu Feb 16 06:20:44 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.813
[Thu Feb 16 06:20:44 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 8.61"
[Thu Feb 16 08:05:29 2012] fullrun_pn_xmm0152130401_pi300-10000_cl_pass1_src16.ximg exists
[Thu Feb 16 08:05:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152130401_pi300-10000_cl_pass1_src16.csv
[Thu Feb 16 08:05:29 2012] fullrun_pn_xmm0152130401_pi300-10000_cl_pass1_src16_1.ximg exists
[Thu Feb 16 08:05:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152130401_pi300-10000_cl_pass1_src16.csv
[Thu Feb 16 08:05:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0152130401_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0152130401_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 08:05:30 2012] fullrun_pn_xmm0152130401_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Thu Feb 16 08:05:30 2012] fullrun_pn_xmm0152130401_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Thu Feb 16 08:05:30 2012] Fit fullrun_pn_xmm0152130401_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Thu Feb 16 10:03:23 2012] Spatial fit model total counts = 355.703000, observed total counts = 356.000000
[Thu Feb 16 10:03:23 2012] Offset between fit and detection position for source 20 = 0.176903 pixels
[Thu Feb 16 10:03:23 2012] 352.265500 total counts/ 277.120000 bgd. counts: snr = 4.514078
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.176903 pixels
  Position = (241.2, 280.2) = 14 10 50.20 -42 46 25.9
  Extent = 5.5 (4.2-6.8)", rotation angle = 0
  Source counts = 75.1 +/- 18.8
  Background counts = 277.1
  Rate = 0.01 +/- 0.002
[Thu Feb 16 10:03:24 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 10:03:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 10:03:24 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 10:03:24 2012] Source does appear to be extended
[Thu Feb 16 10:03:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 10:03:56 2012] XMMSAS src. selection expression = ellipse(20931.669800, 24327.563800, 329.865009, 329.865009, 0.000000, X, Y)
[Thu Feb 16 10:03:56 2012] Writing source region out to fullrun_pn_xmm0152130401_pi300-10000_pass1_cl_src20_src.reg
[Thu Feb 16 10:03:56 2012] Extracting stamp from image fullrun_pn_xmm0152130401_pi300-10000_cl_sm2.00.img.gz, (222, 261) - (260, 299)
[Thu Feb 16 10:03:56 2012] XMMSAS bgd. selection expression = annulus(20931.669800, 24327.563800, 549.775016, 1099.550032, X, Y) && !ellipse(23745.876000, 24174.878000, 2483.216071, 2470.416071, 0.000000, X, Y) && !ellipse(23126.274000, 24579.718000, 1241.608036, 1241.608036, 0.000000, X, Y) && !ellipse(22384.412000, 24595.244600, 1249.608036, 1249.608036, 0.000000, X, Y)
[Thu Feb 16 10:03:56 2012] Writing fullrun_pn_xmm0152130401_pi300-10000_pass1_cl_src20.gif
[Thu Feb 16 10:19:10 2012] Mean detx,y = (4135.44, 2143.48) 
[Thu Feb 16 10:19:17 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 10:19:30 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 10:19:31 2012] Setting source spectrum file to fullrun_pn_xmm0152130401_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Thu Feb 16 10:19:31 2012] Setting bgd. spectrum file to fullrun_pn_xmm0152130401_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Thu Feb 16 13:17:45 2012] Not generating rmf since there are only 75 counts
[Thu Feb 16 13:17:45 2012] rmf not generated due to insufficient counts
[Thu Feb 16 17:45:12 2012] Updating aperture counts using extracted products
[Thu Feb 16 17:45:12 2012] Error reading totcts from fullrun_pn_xmm0152130401_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Thu Feb 16 17:45:12 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 16 17:45:12 2012] Using photon index=1.80, rate=0.00983, arf fullrun_pn_xmm0152130401_pi300-10000_pass1_cl_src20.arf
[Thu Feb 16 17:45:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 16 17:45:13 2012] Updating source flux to 3.6e-14
[Thu Feb 16 17:46:47 2012] Source 20 has fewer than 100.000000 counts, skipping spectral fitting