[Thu Feb 16 01:44:17 2012] Detection parameters:
  Position = (365.9, 97.7) = 14 10 0.80 -42 59 44.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.4 +/- 7.2
  Background counts = 3.3
  Rate = 0.003 +/- 0.0008

[Thu Feb 16 01:44:18 2012] Off-axis axis estimate = 15.35'
[Thu Feb 16 05:19:44 2012] Using EEF radius (= 14.10 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 05:19:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Feb 16 05:19:44 2012] Initial guess for spatial extent in simple fitting = 14.10"
[Thu Feb 16 05:19:44 2012] source mask rpix=3.2, npix_max = 56, mask sum = 34, frac = 0.607
[Thu Feb 16 05:19:44 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 14.10"
[Thu Feb 16 06:20:13 2012] fullrun_mos2_xmm0152130401_pi300-10000_cl_pass0_src25.ximg exists
[Thu Feb 16 06:20:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152130401_pi300-10000_cl_pass0_src25.csv
[Thu Feb 16 06:20:13 2012] fullrun_mos2_xmm0152130401_pi300-10000_cl_pass0_src25_1.ximg exists
[Thu Feb 16 06:20:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152130401_pi300-10000_cl_pass0_src25.csv
[Thu Feb 16 06:20:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152130401_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152130401_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 06:20:13 2012] fullrun_mos2_xmm0152130401_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Thu Feb 16 06:20:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152130401_pi300-10000_cl_pass0_tfrozen_src25.csv
[Thu Feb 16 06:20:13 2012] fullrun_mos2_xmm0152130401_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Thu Feb 16 06:20:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152130401_pi300-10000_cl_pass0_tfrozen_src25.csv
[Thu Feb 16 06:20:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152130401_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152130401_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 06:20:35 2012] Spatial fit model total counts = 46.360000, observed total counts = 54.000000
[Thu Feb 16 06:20:35 2012] Poor agreement between spatial fit and data for source 16
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Feb 16 06:20:35 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 06:20:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 06:20:35 2012] Assessing source extent using major
[Thu Feb 16 06:20:35 2012] Source does appear to be extended
[Thu Feb 16 06:20:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 06:20:35 2012] Deleting source due to low Poisson probability 0.9