[Fri May 3 23:28:24 2013] Detection parameters: Position = (291.6, 308.0) = 16 53 14.53 -59 45 0.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 87.4 +/- 17.9 Background counts = 97.4 Rate = 0.01 +/- 0.003 [Fri May 3 23:28:24 2013] Off-axis axis estimate = 0.86' [Fri May 3 23:29:59 2013] Using EEF radius (= 6.86 ")to estimate initial spatial extent for simple fitting [Fri May 3 23:29:59 2013] Initial guess for spatial extent in simple fitting = 6.86" [Fri May 3 23:29:59 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.928 [Fri May 3 23:29:59 2013] Giving source the simple spatial ID 48 for pass 0, mean size = 6.86" [Sat May 4 02:47:50 2013] fullrun_pn_xmm0152130301_pi300-10000_cl_pass0_src48.ximg exists [Sat May 4 02:47:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152130301_pi300-10000_cl_pass0_src48.csv [Sat May 4 02:47:50 2013] fullrun_pn_xmm0152130301_pi300-10000_cl_pass0_src48_1.ximg exists [Sat May 4 02:47:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152130301_pi300-10000_cl_pass0_src48.csv [Sat May 4 02:47:50 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0152130301_pi300-10000_cl_pass0_src48_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0152130301_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 02:47:51 2013] fullrun_pn_xmm0152130301_pi300-10000_cl_pass0_tfrozen_src48.ximg exists [Sat May 4 02:47:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152130301_pi300-10000_cl_pass0_tfrozen_src48.csv [Sat May 4 02:47:51 2013] fullrun_pn_xmm0152130301_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists [Sat May 4 02:47:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152130301_pi300-10000_cl_pass0_tfrozen_src48.csv [Sat May 4 02:47:51 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0152130301_pi300-10000_cl_pass0_tfrozen_src48_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0152130301_pi300-10000_cl_pass0_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 07:01:52 2013] Warning, spatial fit 48 centroid is now closest to src. 31 [Sat May 4 07:01:52 2013] Vigneting correction estimate = 1.000000 [Sat May 4 07:01:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 4 07:01:52 2013] Assessing source extent using major [Sat May 4 07:01:52 2013] Source does appear to be extended [Sat May 4 07:01:52 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 4 07:01:52 2013] Source is confused with source 29 [Sat May 4 07:02:19 2013] Using EEF radius (= 6.86 ")to estimate initial spatial extent for simple fitting [Sat May 4 07:02:19 2013] Initial guess for spatial extent in simple fitting = 6.86" [Sat May 4 07:02:19 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.928 [Sat May 4 07:02:19 2013] Giving source the simple spatial ID 40 for pass 1, mean size = 6.86" [Sat May 4 09:40:08 2013] fullrun_pn_xmm0152130301_pi300-10000_cl_pass1_src40.ximg exists [Sat May 4 09:40:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152130301_pi300-10000_cl_pass1_src40.csv [Sat May 4 09:40:08 2013] fullrun_pn_xmm0152130301_pi300-10000_cl_pass1_src40_1.ximg exists [Sat May 4 09:40:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152130301_pi300-10000_cl_pass1_src40.csv [Sat May 4 09:40:08 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0152130301_pi300-10000_cl_pass1_src40_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0152130301_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 09:40:09 2013] fullrun_pn_xmm0152130301_pi300-10000_cl_pass1_tfrozen_src40.ximg exists [Sat May 4 09:40:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152130301_pi300-10000_cl_pass1_tfrozen_src40.csv [Sat May 4 09:40:09 2013] fullrun_pn_xmm0152130301_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists [Sat May 4 09:40:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0152130301_pi300-10000_cl_pass1_tfrozen_src40.csv [Sat May 4 09:40:09 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0152130301_pi300-10000_cl_pass1_tfrozen_src40_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0152130301_pi300-10000_cl_pass1_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 12:17:29 2013] Source 51 is offset by 0.767390 and -8.443107 pixels which is larger than 2 X fitted extent = 0.917715 x 0.917715, not incorporating fit results [Sat May 4 12:17:29 2013] Warning, spatial fit 40 centroid is now closest to src. 29 [Sat May 4 12:17:29 2013] Vigneting correction estimate = 1.000000 [Sat May 4 12:17:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 4 12:17:29 2013] Assessing source extent using major [Sat May 4 12:17:29 2013] Source does appear to be extended [Sat May 4 12:17:29 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 4 12:17:50 2013] XMMSAS src. selection expression = ellipse(25320.150940, 26751.519714, 652.500000, 652.500000, 0.000000, X, Y) [Sat May 4 12:17:50 2013] Writing source region out to fullrun_pn_xmm0152130301_pi300-10000_pass1_cl_src51_src.reg [Sat May 4 12:17:50 2013] Extracting stamp from image fullrun_pn_xmm0152130301_pi300-10000_cl_sm2.00.img.gz, (254, 271) - (329, 346) [Sat May 4 12:17:50 2013] XMMSAS bgd. selection expression = annulus(25320.150940, 26751.519714, 1087.500000, 2175.000000, X, Y) && !ellipse(27580.584473, 29626.913788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26736.813507, 29793.716003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27834.102600, 29131.931366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26679.387878, 29098.637299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26154.254944, 28913.621582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25780.031219, 28017.166870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28054.547028, 28184.898346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27462.125031, 28053.254028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26957.125183, 28090.881104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28004.340424, 27435.195068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26155.036600, 27698.353600, 1136.064033, 1136.064033, 0.000000, X, Y) && !ellipse(26725.662384, 27265.942261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25805.020355, 26842.135864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26948.890000, 26607.282800, 1099.160032, 1099.160032, 0.000000, X, Y) && !ellipse(25532.948883, 26214.972809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25065.573456, 25802.004242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26092.408691, 26044.278320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26361.960541, 24205.527161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23938.094025, 27747.575195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27206.982025, 27353.430786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24430.870117, 26585.508698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28030.962402, 26414.662872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26862.894000, 25070.022000, 1108.056032, 1108.056032, 0.000000, X, Y) && !ellipse(27375.727722, 25034.942383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25434.885376, 25193.272400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26151.849487, 24850.391296, 870.000000, 870.000000, 0.000000, X, Y) [Sat May 4 12:17:50 2013] Writing fullrun_pn_xmm0152130301_pi300-10000_pass1_cl_src51.gif [Sat May 4 12:28:55 2013] Mean detx,y = (-1502.04, 596.55) [Sat May 4 12:28:58 2013] Setting backscal keywords in source and bgd. spectrum [Sat May 4 12:29:11 2013] Binned source spectrum to 10 counts/bin [Sat May 4 12:29:11 2013] Setting source spectrum file to fullrun_pn_xmm0152130301_pi300-10000_pass1_cl_src51_src_b10.pi.gz [Sat May 4 12:29:11 2013] Setting bgd. spectrum file to fullrun_pn_xmm0152130301_pi300-10000_pass1_cl_src51_bgd.pi.gz [Sat May 4 13:12:41 2013] Not generating rmf since there are only 87 counts [Sat May 4 13:12:41 2013] rmf not generated due to insufficient counts [Sat May 4 13:53:05 2013] Updating aperture counts using extracted products [Sat May 4 13:53:05 2013] Total counts from fullrun_pn_xmm0152130301_pi300-10000_pass1_cl_src51_src_b10.pi.gz = 913.00 [Sat May 4 13:53:05 2013] Total counts from fullrun_pn_xmm0152130301_pi300-10000_pass1_cl_src51_bgd.pi.gz = 518.00 [Sat May 4 13:53:05 2013] Got source and background scale factors 1226742.000000, 1449355.000000 [Sat May 4 13:53:05 2013] User source parameters: Position = (291.6, 308.0) = 16 53 14.53 -59 45 0.1 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 474.6 +/- 31.2 Background aperture counts = 438.4 Rate = 0.08 +/- 0.006 [Sat May 4 13:53:05 2013] Updating counts from extracted products [Sat May 4 13:53:05 2013] Set source signif. to 474.56/20.94 = 22.66 [Sat May 4 13:53:07 2013] Calculating source flux in energy range 0.30-8.00 [Sat May 4 13:53:07 2013] Using photon index=1.80, rate=0.0842, arf fullrun_pn_xmm0152130301_pi300-10000_pass1_cl_src51.arf [Sat May 4 13:53:07 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat May 4 13:53:07 2013] Updating source flux to 3.3e-13 [Sat May 4 13:53:19 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat May 4 13:53:22 2013] xmm0152130301/analysis//spectral/fullrun_pn_xmm0152130301_pi300-10000_pass1_cl_src51_pl.csv not found, spectral fit skipped or did not complete