[Fri Sep  7 02:52:18 2012] Detection parameters:
  Position = (480.9, 250.9) = 13 23 11.58 -57 41 38.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97.6 +/- 14.0
  Background counts = 17.0
  Rate = 0.02 +/- 0.003

[Fri Sep  7 02:52:19 2012] Off-axis axis estimate = 13.67'
[Fri Sep  7 02:53:03 2012] Using EEF radius (= 13.26 ")to estimate initial spatial extent for simple fitting
[Fri Sep  7 02:53:03 2012] Initial guess for spatial extent in simple fitting = 13.26"
[Fri Sep  7 02:53:03 2012] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.973
[Fri Sep  7 02:53:03 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 13.26"
[Fri Sep  7 05:38:42 2012] fullrun_mos2_xmm0152130101_pi300-10000_cl_pass0_src11.ximg exists
[Fri Sep  7 05:38:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152130101_pi300-10000_cl_pass0_src11.csv
[Fri Sep  7 05:38:42 2012] fullrun_mos2_xmm0152130101_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Sep  7 05:38:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152130101_pi300-10000_cl_pass0_src11.csv
[Fri Sep  7 05:38:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152130101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152130101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 05:38:43 2012] fullrun_mos2_xmm0152130101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Sep  7 05:38:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152130101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Fri Sep  7 05:38:43 2012] fullrun_mos2_xmm0152130101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Sep  7 05:38:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152130101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Fri Sep  7 05:38:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152130101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152130101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 05:38:52 2012] Warning, spatial fit 11 centroid is now closest to src. 10
[Fri Sep  7 05:38:52 2012] Spatial fit model total counts = 493.621000, observed total counts = 456.000000
[Fri Sep  7 05:38:52 2012] Offset between fit and detection position for source 12 = 3.224162 pixels
[Fri Sep  7 05:38:52 2012] Warning, changing simple spatial fit ID from 11 to 34
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 3.224162 pixels
  Position = (483.4, 248.9) = 13 23 10.22 -57 41 47.4
  Extent = 26.8 (26.7-26.9)", rotation angle = 0
  Source counts = 390.7 +/- 19.8
  Background counts = 0.0
  Rate = 0.07 +/- 0.004
 Deleting source due to low signal-to-noise ratio