[Fri Sep  7 02:52:18 2012] Detection parameters:
  Position = (310.5, 407.0) = 13 24 44.07 -57 30 18.2
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 142.4 +/- 29.9
  Background counts = 275.5
  Rate = 0.03 +/- 0.006

[Fri Sep  7 02:52:19 2012] Off-axis axis estimate = 7.92'
[Fri Sep  7 02:53:03 2012] Using EEF radius (= 10.39 ")to estimate initial spatial extent for simple fitting
[Fri Sep  7 02:53:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep  7 02:53:03 2012] Initial guess for spatial extent in simple fitting = 10.39"
[Fri Sep  7 02:53:03 2012] source mask rpix=2.4, npix_max = 33, mask sum = 26, frac = 0.779
[Fri Sep  7 02:53:03 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.39"
[Fri Sep  7 05:38:41 2012] fullrun_mos2_xmm0152130101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Sep  7 05:38:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152130101_pi300-10000_cl_pass0_src1.csv
[Fri Sep  7 05:38:41 2012] fullrun_mos2_xmm0152130101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Sep  7 05:38:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0152130101_pi300-10000_cl_pass0_src1.csv
[Fri Sep  7 05:38:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0152130101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0152130101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 05:38:42 2012] fullrun_mos2_xmm0152130101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep  7 05:38:42 2012] fullrun_mos2_xmm0152130101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep  7 05:38:42 2012] Fit fullrun_mos2_xmm0152130101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep  7 05:38:52 2012] Source 1 is offset by 8.482759 and 3.030927 pixels which is larger than
2 X fitted extent = 1.193867 x 1.193867, not incorporating fit results
[Fri Sep  7 05:38:52 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 05:38:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 05:38:52 2012] Assessing source extent using major
[Fri Sep  7 05:38:52 2012] Source does appear to be extended
[Fri Sep  7 05:38:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 05:38:57 2012] Using EEF radius (= 10.39 ")to estimate initial spatial extent for simple fitting
[Fri Sep  7 05:38:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep  7 05:38:57 2012] Initial guess for spatial extent in simple fitting = 10.39"
[Fri Sep  7 05:38:57 2012] source mask rpix=2.4, npix_max = 33, mask sum = 26, frac = 0.779
[Fri Sep  7 05:38:57 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.39"
[Fri Sep  7 07:58:23 2012] fullrun_mos2_xmm0152130101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Sep  7 07:58:23 2012] fullrun_mos2_xmm0152130101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Sep  7 07:58:23 2012] Fit fullrun_mos2_xmm0152130101_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri Sep  7 07:58:24 2012] fullrun_mos2_xmm0152130101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep  7 07:58:24 2012] fullrun_mos2_xmm0152130101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep  7 07:58:24 2012] Fit fullrun_mos2_xmm0152130101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep  7 07:58:31 2012] Source 1 is offset by 8.509034 and 3.029571 pixels which is larger than
2 X fitted extent = 1.193867 x 1.193867, not incorporating fit results
[Fri Sep  7 07:58:31 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 07:58:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 07:58:31 2012] Assessing source extent using major
[Fri Sep  7 07:58:31 2012] Source does appear to be extended
[Fri Sep  7 07:58:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 07:58:36 2012] XMMSAS src. selection expression = ellipse(26965.000000, 35356.692688, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Sep  7 07:58:36 2012] Writing source region out to fullrun_mos2_xmm0152130101_pi300-10000_pass1_cl_src1_src.reg
[Fri Sep  7 07:58:36 2012] Extracting stamp from image fullrun_mos2_xmm0152130101_pi300-10000_cl_sm2.00.img.gz, (236, 332) - (386, 482)
[Fri Sep  7 07:58:36 2012] XMMSAS bgd. selection expression = annulus(26965.000000, 35356.692688, 2175.000000, 4350.000000, X, Y)
[Fri Sep  7 07:58:36 2012] Writing fullrun_mos2_xmm0152130101_pi300-10000_pass1_cl_src1.gif
[Fri Sep  7 07:58:40 2012] Mean detx,y = (-2438.47, 7207.01) 
[Fri Sep  7 07:58:41 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Sep  7 07:59:13 2012] grppha failed
[Fri Sep  7 07:59:13 2012] Setting source spectrum file to fullrun_mos2_xmm0152130101_pi300-10000_pass1_cl_src1_src.pi.gz
[Fri Sep  7 07:59:13 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0152130101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Sep  7 08:15:25 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Sep  7 08:15:25 2012] rmf not generated due to insufficient counts
[Fri Sep  7 08:15:41 2012] Updating aperture counts using extracted products
[Fri Sep  7 08:15:41 2012] Error reading totcts from fullrun_mos2_xmm0152130101_pi300-10000_pass1_cl_src1_src.pi.gz
[Fri Sep  7 08:15:42 2012] No arf file for this source, not re-computing flux
[Fri Sep  7 08:15:43 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Sep  7 08:15:44 2012] xmm0152130101/analysis//spectral/fullrun_mos2_xmm0152130101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete