[Wed Aug 15 19:03:51 2012] Detection parameters:
  Position = (236.2, 424.4) = 13 6 42.29 64 22 54.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.5 +/- 9.0
  Background counts = 4.3
  Rate = 0.007 +/- 0.001

[Wed Aug 15 19:03:51 2012] Off-axis axis estimate = 10.18'
[Wed Aug 15 19:20:08 2012] Using EEF radius (= 11.52 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 19:20:08 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug 15 19:20:08 2012] Initial guess for spatial extent in simple fitting = 11.52"
[Wed Aug 15 19:20:08 2012] source mask rpix=2.6, npix_max = 39, mask sum = 35, frac = 0.883
[Wed Aug 15 19:20:08 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.52"
[Wed Aug 15 19:25:34 2012] fullrun_mos2_xmm0151790701_pi300-10000_cl_pass0_src3.ximg exists
[Wed Aug 15 19:25:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0151790701_pi300-10000_cl_pass0_src3.csv
[Wed Aug 15 19:25:34 2012] fullrun_mos2_xmm0151790701_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Aug 15 19:25:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0151790701_pi300-10000_cl_pass0_src3.csv
[Wed Aug 15 19:25:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0151790701_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0151790701_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 19:25:34 2012] fullrun_mos2_xmm0151790701_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Aug 15 19:25:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0151790701_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Aug 15 19:25:34 2012] fullrun_mos2_xmm0151790701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Aug 15 19:25:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0151790701_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Aug 15 19:25:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0151790701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0151790701_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 19:25:37 2012] Spatial fit model total counts = 72.331100, observed total counts = 65.000000
[Wed Aug 15 19:25:37 2012] Offset between fit and detection position for source 3 = 0.345306 pixels
[Wed Aug 15 19:25:37 2012] 72.706200 total counts/ 39.783600 bgd. counts: snr = 5.219658
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.345306 pixels
  Position = (236.6, 424.5) = 13 6 42.08 64 22 55.7
  Extent = 5.6 (4.0-8.2)", rotation angle = 0
  Source counts = 32.9 +/- 8.5
  Background counts = 39.8
  Rate = 0.005 +/- 0.001
[Wed Aug 15 19:25:37 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 19:25:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 19:25:37 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 19:25:37 2012] Source does appear to be extended
[Wed Aug 15 19:25:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 19:38:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 15 19:38:54 2012] Initial guess for spatial extent in simple fitting = 5.64"
[Wed Aug 15 19:38:54 2012] source mask rpix=1.3, npix_max = 12, mask sum = 6, frac = 0.464
[Wed Aug 15 19:38:54 2012] Skipping simple spatial due to low active detector fraction
[Wed Aug 15 19:43:06 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 19:43:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 19:43:06 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 19:43:06 2012] Source does appear to be extended
[Wed Aug 15 19:43:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 19:56:18 2012] XMMSAS src. selection expression = ellipse(20532.501400, 36882.579800, 338.667010, 338.667010, 0.000000, X, Y)
[Wed Aug 15 19:56:18 2012] Writing source region out to fullrun_mos2_xmm0151790701_pi300-10000_pass1_cl_src3_src.reg
[Wed Aug 15 19:56:18 2012] Extracting stamp from image fullrun_mos2_xmm0151790701_pi300-10000_cl_sm2.00.img.gz, (217, 405) - (256, 444)
[Wed Aug 15 19:56:18 2012] XMMSAS bgd. selection expression = annulus(20532.501400, 36882.579800, 564.445016, 1128.890032, X, Y)
[Wed Aug 15 19:56:18 2012] Writing fullrun_mos2_xmm0151790701_pi300-10000_pass1_cl_src3.gif
[Wed Aug 15 19:56:41 2012] Mean detx,y = (12309.85, -6706.45) 
[Wed Aug 15 19:56:41 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 19:56:57 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 19:56:58 2012] Setting source spectrum file to fullrun_mos2_xmm0151790701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Aug 15 19:56:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0151790701_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Aug 15 19:57:17 2012] Not generating rmf since there are only 32 counts
[Wed Aug 15 19:57:17 2012] rmf not generated due to insufficient counts
[Wed Aug 15 19:57:41 2012] Updating aperture counts using extracted products
[Wed Aug 15 19:57:41 2012] Error reading totcts from fullrun_mos2_xmm0151790701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Aug 15 19:57:41 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 15 19:57:41 2012] Using photon index=1.80, rate=0.00493, arf fullrun_mos2_xmm0151790701_pi300-10000_pass1_cl_src3.arf
[Wed Aug 15 19:57:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 15 19:57:41 2012] Updating source flux to 2e-13
[Wed Aug 15 19:57:43 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Aug 15 19:57:44 2012] xmm0151790701/analysis//spectral/fullrun_mos2_xmm0151790701_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete