[Sat Jul 14 10:12:38 2012] Detection parameters:
  Position = (237.6, 149.3) = 0 34 7.28 39 19 53.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 20.7 +/- 5.7
  Background counts = 2.2
  Rate = 0.002 +/- 0.0006

[Sat Jul 14 10:12:39 2012] Off-axis axis estimate = 11.68'
[Sat Jul 14 11:07:14 2012] Using EEF radius (= 12.27 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 11:07:14 2012] Initial guess for spatial extent in simple fitting = 12.27"
[Sat Jul 14 11:07:14 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.111
[Sat Jul 14 11:07:14 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 12.27"
[Sat Jul 14 11:32:49 2012] fullrun_mos2_xmm0151581101_pi300-10000_cl_pass0_src11.ximg exists
[Sat Jul 14 11:32:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0151581101_pi300-10000_cl_pass0_src11.csv
[Sat Jul 14 11:32:49 2012] fullrun_mos2_xmm0151581101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat Jul 14 11:32:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0151581101_pi300-10000_cl_pass0_src11.csv
[Sat Jul 14 11:32:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0151581101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0151581101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 11:32:49 2012] fullrun_mos2_xmm0151581101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat Jul 14 11:32:49 2012] fullrun_mos2_xmm0151581101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Jul 14 11:32:49 2012] Fit fullrun_mos2_xmm0151581101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sat Jul 14 11:33:02 2012] Spatial fit model total counts = 37.508000, observed total counts = 39.000000
[Sat Jul 14 11:33:02 2012] Offset between fit and detection position for source 6 = 0.328388 pixels
[Sat Jul 14 11:33:02 2012] 37.963200 total counts/ 28.006700 bgd. counts: snr = 1.881377
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.328388 pixels
  Position = (237.9, 149.1) = 0 34 7.18 39 19 53.1
  Extent = 3.1" x 3.1", rotation angle = 0
  Source counts = 10.0 +/- 6.2
  Background counts = 28.0
  Rate = 0.001 +/- 0.0006
[Sat Jul 14 11:33:02 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 11:33:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 11:33:02 2012] Assessing source extent using major
[Sat Jul 14 11:33:02 2012] Source does appear to be extended
[Sat Jul 14 11:33:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 12:19:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 14 12:19:47 2012] Initial guess for spatial extent in simple fitting = 3.07"
[Sat Jul 14 12:19:47 2012] Spatial fitting skipped for pass 1: source                                 has 10.0 net counts, is at off-axis angle 11.7'
[Sat Jul 14 12:41:08 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 12:41:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 12:41:08 2012] Assessing source extent using major
[Sat Jul 14 12:41:08 2012] Source does appear to be extended
[Sat Jul 14 12:41:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 13:03:58 2012] XMMSAS src. selection expression = ellipse(20648.030600, 12925.291400, 184.005605, 184.005605, 0.000000, X, Y)
[Sat Jul 14 13:03:58 2012] Writing source region out to fullrun_mos2_xmm0151581101_pi300-10000_pass1_cl_src6_src.reg
[Sat Jul 14 13:03:58 2012] Extracting stamp from image fullrun_mos2_xmm0151581101_pi300-10000_cl_sm2.00.img.gz, (227, 139) - (248, 160)
[Sat Jul 14 13:03:58 2012] XMMSAS bgd. selection expression = annulus(20648.030600, 12925.291400, 306.676009, 613.352018, X, Y)
[Sat Jul 14 13:03:58 2012] Writing fullrun_mos2_xmm0151581101_pi300-10000_pass1_cl_src6.gif
[Sat Jul 14 13:07:18 2012] Mean detx,y = (-3264.92, -14910.00) 
[Sat Jul 14 13:07:22 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 13:07:35 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 13:07:35 2012] Setting source spectrum file to fullrun_mos2_xmm0151581101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Jul 14 13:07:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0151581101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat Jul 14 13:09:16 2012] Not generating rmf since there are only 9 counts
[Sat Jul 14 13:09:16 2012] rmf not generated due to insufficient counts
[Sat Jul 14 13:09:44 2012] Updating aperture counts using extracted products
[Sat Jul 14 13:09:44 2012] Error reading totcts from fullrun_mos2_xmm0151581101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Jul 14 13:09:44 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 13:09:44 2012] Using photon index=1.80, rate=0.00103, arf fullrun_mos2_xmm0151581101_pi300-10000_pass1_cl_src6.arf
[Sat Jul 14 13:09:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 13:09:44 2012] Updating source flux to 4.8e-14
[Sat Jul 14 13:09:46 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jul 14 13:09:47 2012] xmm0151581101/analysis//spectral/fullrun_mos2_xmm0151581101_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete