[Sun Feb 12 10:01:10 2012] Detection parameters:
  Position = (93.0, 356.0) = 5 16 26.60 -69 48 22.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 128.3 +/- 14.3
  Background counts = 4.4
  Rate = 0.008 +/- 0.0009

[Sun Feb 12 10:01:10 2012] Off-axis axis estimate = 15.47'
[Sun Feb 12 10:01:33 2012] Using EEF radius (= 14.16 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 10:01:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 12 10:01:33 2012] Initial guess for spatial extent in simple fitting = 14.16"
[Sun Feb 12 10:01:33 2012] source mask rpix=3.3, npix_max = 56, mask sum = 64, frac = 1.134
[Sun Feb 12 10:01:33 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 14.16"
[Sun Feb 12 10:16:43 2012] fullrun_mos1_xmm0151412801_pi300-10000_cl_pass0_src1.ximg exists
[Sun Feb 12 10:16:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0151412801_pi300-10000_cl_pass0_src1.csv
[Sun Feb 12 10:16:43 2012] fullrun_mos1_xmm0151412801_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Feb 12 10:16:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0151412801_pi300-10000_cl_pass0_src1.csv
[Sun Feb 12 10:16:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0151412801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0151412801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 10:16:43 2012] fullrun_mos1_xmm0151412801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Feb 12 10:16:43 2012] fullrun_mos1_xmm0151412801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Feb 12 10:16:43 2012] Fit fullrun_mos1_xmm0151412801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Feb 12 10:33:10 2012] Spatial fit model total counts = 186.373000, observed total counts = 197.000000
[Sun Feb 12 10:33:10 2012] Offset between fit and detection position for source 1 = 0.315899 pixels
[Sun Feb 12 10:33:10 2012] 191.924800 total counts/ 94.701600 bgd. counts: snr = 9.990593
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.315899 pixels
  Position = (93.3, 356.2) = 5 16 26.40 -69 48 23.4
  Extent = 7.4 (6.5-8.9)", rotation angle = 0
  Source counts = 97.2 +/- 13.9
  Background counts = 94.7
  Rate = 0.006 +/- 0.0009
[Sun Feb 12 10:33:10 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 10:33:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 10:33:10 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 10:33:10 2012] Source does appear to be extended
[Sun Feb 12 10:33:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 10:33:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 12 10:33:16 2012] Initial guess for spatial extent in simple fitting = 7.41"
[Sun Feb 12 10:33:16 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.824
[Sun Feb 12 10:33:16 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.41"
[Sun Feb 12 10:48:21 2012] fullrun_mos1_xmm0151412801_pi300-10000_cl_pass1_src1.ximg exists
[Sun Feb 12 10:48:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0151412801_pi300-10000_cl_pass1_src1.csv
[Sun Feb 12 10:48:21 2012] fullrun_mos1_xmm0151412801_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Feb 12 10:48:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0151412801_pi300-10000_cl_pass1_src1.csv
[Sun Feb 12 10:48:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0151412801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0151412801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 10:48:21 2012] fullrun_mos1_xmm0151412801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Feb 12 10:48:21 2012] fullrun_mos1_xmm0151412801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Feb 12 10:48:21 2012] Fit fullrun_mos1_xmm0151412801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Feb 12 11:03:49 2012] Spatial fit model total counts = 134.284000, observed total counts = 136.000000
[Sun Feb 12 11:03:49 2012] Offset between fit and detection position for source 1 = 0.139306 pixels
[Sun Feb 12 11:03:49 2012] 136.651200 total counts/ 45.859700 bgd. counts: snr = 13.406938
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.139306 pixels
  Position = (93.2, 356.3) = 5 16 26.48 -69 48 23.0
  Extent = 7.0 (5.9-8.4)", rotation angle = 0
  Source counts = 90.8 +/- 11.7
  Background counts = 45.9
  Rate = 0.006 +/- 0.0008
[Sun Feb 12 11:03:49 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 11:03:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 11:03:49 2012] Assessing source extent using major axis lower bound
[Sun Feb 12 11:03:49 2012] Source does appear to be extended
[Sun Feb 12 11:03:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 11:03:54 2012] XMMSAS src. selection expression = ellipse(8057.762680, 30949.364600, 417.880812, 417.880812, 0.000000, X, Y)
[Sun Feb 12 11:03:54 2012] Writing source region out to fullrun_mos1_xmm0151412801_pi300-10000_pass1_cl_src1_src.reg
[Sun Feb 12 11:03:54 2012] Extracting stamp from image fullrun_mos1_xmm0151412801_pi300-10000_cl_sm2.00.img.gz, (69, 332) - (117, 380)
[Sun Feb 12 11:03:54 2012] XMMSAS bgd. selection expression = annulus(8057.762680, 30949.364600, 696.468020, 1392.936040, X, Y)
[Sun Feb 12 11:03:54 2012] Writing fullrun_mos1_xmm0151412801_pi300-10000_pass1_cl_src1.gif
[Sun Feb 12 11:03:56 2012] Mean detx,y = (16110.95, 4706.89) 
[Sun Feb 12 11:03:56 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 12 11:04:06 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 12 11:04:07 2012] Setting source spectrum file to fullrun_mos1_xmm0151412801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Feb 12 11:04:07 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0151412801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Feb 12 11:05:57 2012] Not generating rmf since there are only 90 counts
[Sun Feb 12 11:05:57 2012] rmf not generated due to insufficient counts
[Sun Feb 12 11:10:23 2012] Updating aperture counts using extracted products
[Sun Feb 12 11:10:23 2012] Error reading totcts from fullrun_mos1_xmm0151412801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Feb 12 11:10:23 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 11:10:23 2012] Using photon index=1.80, rate=0.0059, arf fullrun_mos1_xmm0151412801_pi300-10000_pass1_cl_src1.arf
[Sun Feb 12 11:10:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 12 11:10:23 2012] Updating source flux to 1.7e-13
[Sun Feb 12 11:10:24 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Feb 12 11:10:25 2012] xmm0151412801/analysis//spectral/fullrun_mos1_xmm0151412801_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete