[Fri Nov 25 13:39:20 2011] Detection parameters: Position = (249.9, 484.9) = 5 14 21.75 -69 39 44.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 44.8 +/- 11.8 Background counts = 24.1 Rate = 0.004 +/- 0.001 [Fri Nov 25 13:39:20 2011] Off-axis axis estimate = 13.97' [Fri Nov 25 13:44:08 2011] Using EEF radius (= 13.41 ")to estimate initial spatial extent for simple fitting [Fri Nov 25 13:44:08 2011] Initial guess for spatial extent in simple fitting = 13.41" [Fri Nov 25 13:44:08 2011] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.954 [Fri Nov 25 13:44:08 2011] Giving source the simple spatial ID 24 for pass 0, mean size = 13.41" [Fri Nov 25 16:06:27 2011] fullrun_pn_xmm0151412401_pi300-10000_cl_pass0_src24.ximg exists [Fri Nov 25 16:06:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0151412401_pi300-10000_cl_pass0_src24.csv [Fri Nov 25 16:06:27 2011] fullrun_pn_xmm0151412401_pi300-10000_cl_pass0_src24_1.ximg exists [Fri Nov 25 16:06:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0151412401_pi300-10000_cl_pass0_src24.csv [Fri Nov 25 16:06:27 2011] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0151412401_pi300-10000_cl_pass0_src24_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0151412401_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Nov 25 16:06:28 2011] fullrun_pn_xmm0151412401_pi300-10000_cl_pass0_tfrozen_src24.ximg exists [Fri Nov 25 16:06:28 2011] fullrun_pn_xmm0151412401_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists [Fri Nov 25 16:06:28 2011] Fit fullrun_pn_xmm0151412401_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly [Fri Nov 25 23:21:13 2011] Spatial fit model total counts = 882.227000, observed total counts = 883.000000 [Fri Nov 25 23:21:13 2011] Offset between fit and detection position for source 24 = 5.926893 pixels [Fri Nov 25 23:21:13 2011] Warning, changing simple spatial fit ID from 24 to 11 [Fri Nov 25 23:21:13 2011] 832.669021 total counts/ 832.669000 bgd. counts: snr = 0.000001 Spatial fit parameters: Offset between fit and detection position for source 24 = 5.926893 pixels Position = (250.7, 490.7) = 5 14 21.07 -69 39 18.8 Extent = 26.6 (3.3-49.8)", rotation angle = 0 Source counts = 0.0 +/- 28.9 Background counts = 832.7 Rate = 2e-09 +/- 0.003 Deleting source due to low Poisson probability