[Fri Nov 25 13:40:50 2011] Detection parameters:
  Position = (362.2, 168.0) = 5 12 47.12 -70 2 42.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.3 +/- 13.3
  Background counts = 30.3
  Rate = 0.004 +/- 0.0009

[Fri Nov 25 13:40:51 2011] Off-axis axis estimate = 10.52'
[Fri Nov 25 16:06:28 2011] Using EEF radius (= 11.69 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 16:06:28 2011] Initial guess for spatial extent in simple fitting = 11.69"
[Fri Nov 25 16:06:28 2011] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.886
[Fri Nov 25 16:06:28 2011] Giving source the simple spatial ID 85 for pass 0, mean size = 11.69"
[Fri Nov 25 23:20:57 2011] fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_src85.ximg exists
[Fri Nov 25 23:20:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_src85.csv
[Fri Nov 25 23:20:57 2011] fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_src85_1.ximg exists
[Fri Nov 25 23:20:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_src85.csv
[Fri Nov 25 23:20:57 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 23:21:00 2011] fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_tfrozen_src85.ximg exists
[Fri Nov 25 23:21:00 2011] fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_tfrozen_src85_1.ximg exists
[Fri Nov 25 23:21:00 2011] Fit fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_tfrozen_src85 appears to have run properly
[Fri Nov 25 23:21:42 2011] Spatial fit model total counts = 856.507000, observed total counts = 853.000000
[Fri Nov 25 23:21:42 2011] Offset between fit and detection position for source 89 = 0.411813 pixels
[Fri Nov 25 23:21:42 2011] Warning, changing simple spatial fit ID from 85 to 12
[Fri Nov 25 23:21:42 2011] 851.254000 total counts/ 851.254000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 89 = 0.411813 pixels
  Position = (362.3, 167.7) = 5 12 46.97 -70 2 43.9
  Extent = 2.8" x 2.8", rotation angle = 0
  Source counts = 0.0 +/- 29.2
  Background counts = 851.3
  Rate = 2e-19 +/- 0.002
  Deleting source due to low Poisson probability