[Fri Nov 25 13:40:49 2011] Detection parameters:
  Position = (307.8, 175.9) = 5 13 33.28 -70 2 9.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.8 +/- 14.8
  Background counts = 42.4
  Rate = 0.005 +/- 0.001

[Fri Nov 25 13:40:51 2011] Off-axis axis estimate = 8.91'
[Fri Nov 25 16:06:28 2011] Using EEF radius (= 10.88 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 16:06:28 2011] Initial guess for spatial extent in simple fitting = 10.88"
[Fri Nov 25 16:06:28 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.998
[Fri Nov 25 16:06:28 2011] Giving source the simple spatial ID 49 for pass 0, mean size = 10.88"
[Fri Nov 25 23:20:56 2011] fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_src49.ximg exists
[Fri Nov 25 23:20:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_src49.csv
[Fri Nov 25 23:20:56 2011] fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_src49_1.ximg exists
[Fri Nov 25 23:20:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_src49.csv
[Fri Nov 25 23:20:56 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 23:20:59 2011] fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Fri Nov 25 23:20:59 2011] fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Fri Nov 25 23:20:59 2011] Fit fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly
[Fri Nov 25 23:21:42 2011] Warning, spatial fit 49 centroid is now closest to src. 91
[Fri Nov 25 23:21:42 2011] Source 86 is offset by -2.236426 and -0.049044 pixels which is larger than
2 X fitted extent = 1.301936 x 1.301936, not incorporating fit results
[Fri Nov 25 23:21:42 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 23:21:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 23:21:42 2011] Assessing source extent using major
[Fri Nov 25 23:21:42 2011] Source does appear to be extended
[Fri Nov 25 23:21:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 02:16:19 2011] Using EEF radius (= 10.88 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 02:16:19 2011] Initial guess for spatial extent in simple fitting = 10.88"
[Sat Nov 26 02:16:19 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.998
[Sat Nov 26 02:16:19 2011] Giving source the simple spatial ID 35 for pass 1, mean size = 10.88"
[Sat Nov 26 10:44:20 2011] fullrun_mos1_xmm0151412401_pi300-10000_cl_pass1_src35.ximg exists
[Sat Nov 26 10:44:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0151412401_pi300-10000_cl_pass1_src35.csv
[Sat Nov 26 10:44:20 2011] fullrun_mos1_xmm0151412401_pi300-10000_cl_pass1_src35_1.ximg exists
[Sat Nov 26 10:44:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0151412401_pi300-10000_cl_pass1_src35.csv
[Sat Nov 26 10:44:20 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0151412401_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0151412401_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 10:44:23 2011] fullrun_mos1_xmm0151412401_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Sat Nov 26 10:44:23 2011] fullrun_mos1_xmm0151412401_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Sat Nov 26 10:44:23 2011] Fit fullrun_mos1_xmm0151412401_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Sat Nov 26 10:45:06 2011] Warning, spatial fit 35 centroid is now closest to src. 87
[Sat Nov 26 10:45:06 2011] Warning: source 60 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 86 at 27.009391 pixels away
[Sat Nov 26 10:45:07 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 10:45:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 10:45:07 2011] Assessing source extent using major
[Sat Nov 26 10:45:07 2011] Source does appear to be extended
[Sat Nov 26 10:45:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 11:09:27 2011] XMMSAS src. selection expression = ellipse(26734.062897, 15251.665207, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Nov 26 11:09:27 2011] Writing source region out to fullrun_mos1_xmm0151412401_pi300-10000_pass1_cl_src86_src.reg
[Sat Nov 26 11:09:27 2011] Extracting stamp from image fullrun_mos1_xmm0151412401_pi300-10000_cl_sm2.00.img.gz, (270, 138) - (345, 213)
[Sat Nov 26 11:09:27 2011] XMMSAS bgd. selection expression = annulus(26734.062897, 15251.665207, 1087.500000, 2175.000000, X, Y) && !ellipse(28373.564728, 15259.172302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28815.319122, 14473.003525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29541.881165, 14568.838135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28305.342000, 13420.588000, 1894.816055, 1894.816055, 0.000000, X, Y) && !ellipse(29125.304413, 15350.907547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29043.054260, 13705.111969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29458.579620, 15867.361191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28331.363037, 14728.609833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30305.782000, 14313.010000, 1865.488054, 1865.488054, 0.000000, X, Y) && !ellipse(29677.396000, 17126.756000, 1637.376047, 1637.376047, 0.000000, X, Y) && !ellipse(25937.110718, 13528.361359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31632.562000, 14639.180000, 3678.592106, 3344.704096, 317.580000, X, Y) && !ellipse(25119.239563, 14741.570358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27427.170200, 16256.172000, 1191.056034, 1191.056034, 0.000000, X, Y) && !ellipse(31495.659200, 13400.476000, 3110.928090, 3110.928090, 0.000000, X, Y) && !ellipse(29225.470703, 13350.425278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27511.237762, 14042.559555, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Nov 26 11:09:27 2011] Writing fullrun_mos1_xmm0151412401_pi300-10000_pass1_cl_src86.gif
[Sat Nov 26 11:32:14 2011] Mean detx,y = (-7047.89, -10430.44) 
[Sat Nov 26 11:32:16 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Nov 26 11:32:40 2011] Binned source spectrum to 10 counts/bin
[Sat Nov 26 11:32:40 2011] Setting source spectrum file to fullrun_mos1_xmm0151412401_pi300-10000_pass1_cl_src86_src_b10.pi.gz
[Sat Nov 26 11:32:40 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0151412401_pi300-10000_pass1_cl_src86_bgd.pi.gz
[Sat Nov 26 12:34:08 2011] Not generating rmf since there are only 77 counts
[Sat Nov 26 12:34:08 2011] rmf not generated due to insufficient counts
[Sat Nov 26 12:35:17 2011] Updating aperture counts using extracted products
[Sat Nov 26 12:35:17 2011] Error reading totcts from fullrun_mos1_xmm0151412401_pi300-10000_pass1_cl_src86_src_b10.pi.gz
[Sat Nov 26 12:35:19 2011] No arf file for this source, not re-computing flux
[Sat Nov 26 12:35:21 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Nov 26 12:35:22 2011] xmm0151412401/analysis//spectral/fullrun_mos1_xmm0151412401_pi300-10000_pass1_cl_src86_pl.csv not found, spectral fit skipped or did not complete