[Fri Nov 25 13:40:48 2011] Detection parameters:
  Position = (452.5, 232.1) = 5 11 30.85 -69 58 0.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.7 +/- 11.6
  Background counts = 9.8
  Rate = 0.003 +/- 0.0008

[Fri Nov 25 13:40:51 2011] Off-axis axis estimate = 12.16'
[Fri Nov 25 16:06:28 2011] Using EEF radius (= 12.51 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 16:06:28 2011] Initial guess for spatial extent in simple fitting = 12.51"
[Fri Nov 25 16:06:28 2011] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.075
[Fri Nov 25 16:06:28 2011] Giving source the simple spatial ID 99 for pass 0, mean size = 12.51"
[Fri Nov 25 23:20:57 2011] fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_src99.ximg exists
[Fri Nov 25 23:20:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_src99.csv
[Fri Nov 25 23:20:57 2011] fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_src99_1.ximg exists
[Fri Nov 25 23:20:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_src99.csv
[Fri Nov 25 23:20:57 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_src99_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_src99.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 23:21:01 2011] fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_tfrozen_src99.ximg exists
[Fri Nov 25 23:21:01 2011] fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_tfrozen_src99_1.ximg exists
[Fri Nov 25 23:21:01 2011] Fit fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_tfrozen_src99 appears to have run properly
[Fri Nov 25 23:21:42 2011] Spatial fit model total counts = 752.836000, observed total counts = 750.000000
[Fri Nov 25 23:21:42 2011] Offset between fit and detection position for source 68 = 4.939043 pixels
[Fri Nov 25 23:21:42 2011] Warning, changing simple spatial fit ID from 99 to 66
[Fri Nov 25 23:21:42 2011] 663.038500 total counts/ 565.474000 bgd. counts: snr = 4.102849
Spatial fit parameters:
  Offset between fit and detection position for source 68 = 4.939043 pixels
  Position = (450.6, 236.7) = 5 11 32.52 -69 57 41.2
  Extent = 24.5 (24.3-24.5)", rotation angle = 0
  Source counts = 97.6 +/- 25.7
  Background counts = 565.5
  Rate = 0.007 +/- 0.002
[Fri Nov 25 23:21:42 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 23:21:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 23:21:42 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 23:21:42 2011] Source does appear to be extended
[Fri Nov 25 23:21:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 23:21:42 2011] Source is confused with source 15
[Sat Nov 26 02:16:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Nov 26 02:16:19 2011] Initial guess for spatial extent in simple fitting = 24.50"
[Sat Nov 26 02:16:19 2011] source mask rpix=5.6, npix_max = 150, mask sum = 156, frac = 1.037
[Sat Nov 26 02:16:19 2011] Giving source the simple spatial ID 77 for pass 1, mean size = 24.50"
[Sat Nov 26 10:44:21 2011] fullrun_mos1_xmm0151412401_pi300-10000_cl_pass1_src77.ximg exists
[Sat Nov 26 10:44:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0151412401_pi300-10000_cl_pass1_src77.csv
[Sat Nov 26 10:44:21 2011] fullrun_mos1_xmm0151412401_pi300-10000_cl_pass1_src77_1.ximg exists
[Sat Nov 26 10:44:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0151412401_pi300-10000_cl_pass1_src77.csv
[Sat Nov 26 10:44:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0151412401_pi300-10000_cl_pass1_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0151412401_pi300-10000_cl_pass1_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 10:44:25 2011] fullrun_mos1_xmm0151412401_pi300-10000_cl_pass1_tfrozen_src77.ximg exists
[Sat Nov 26 10:44:25 2011] fullrun_mos1_xmm0151412401_pi300-10000_cl_pass1_tfrozen_src77_1.ximg exists
[Sat Nov 26 10:44:25 2011] Fit fullrun_mos1_xmm0151412401_pi300-10000_cl_pass1_tfrozen_src77 appears to have run properly
[Sat Nov 26 10:45:06 2011] Source 68 is offset by -2.048644 and 2.578230 pixels which is larger than
2 X fitted extent = 1.403995 x 1.403995, not incorporating fit results
[Sat Nov 26 10:45:07 2011] Warning, spatial fit 77 centroid is now closest to src. 25
[Sat Nov 26 10:45:07 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 10:45:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 10:45:07 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 10:45:07 2011] Source does appear to be extended
[Sat Nov 26 10:45:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 11:09:30 2011] XMMSAS src. selection expression = ellipse(39150.500000, 20542.394000, 1470.288042, 1470.288042, 0.000000, X, Y)
[Sat Nov 26 11:09:30 2011] Writing source region out to fullrun_mos1_xmm0151412401_pi300-10000_pass1_cl_src68_src.reg
[Sat Nov 26 11:09:30 2011] Extracting stamp from image fullrun_mos1_xmm0151412401_pi300-10000_cl_sm2.00.img.gz, (366, 152) - (535, 321)
[Sat Nov 26 11:09:31 2011] XMMSAS bgd. selection expression = annulus(39150.500000, 20542.394000, 2450.480071, 4900.960141, X, Y) && !ellipse(37712.146000, 18419.464000, 1179.664034, 1179.664034, 0.000000, X, Y) && !ellipse(37814.850000, 19420.864000, 1761.792051, 1761.792051, 0.000000, X, Y) && !ellipse(36842.797546, 17791.584381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38409.636536, 20577.161469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37445.252899, 19864.004669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38539.252000, 21099.128000, 1911.960055, 1911.960055, 0.000000, X, Y) && !ellipse(36649.396000, 20376.124000, 1809.752052, 1809.752052, 0.000000, X, Y) && !ellipse(36588.889130, 18566.615311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39567.468262, 21445.714478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38180.532000, 17725.070000, 2005.192058, 2005.192058, 0.000000, X, Y) && !ellipse(37091.972046, 18396.324387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39012.656000, 19149.984000, 1172.672034, 1172.672034, 0.000000, X, Y) && !ellipse(37769.528600, 18794.556000, 2353.272068, 2353.272068, 0.000000, X, Y) && !ellipse(37659.078339, 21508.685135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38532.482000, 19468.330000, 3920.768113, 3920.768113, 0.000000, X, Y) && !ellipse(39341.302246, 22494.124481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36216.600922, 17081.484848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31632.562000, 14639.180000, 3678.592106, 3344.704096, 317.580000, X, Y) && !ellipse(36434.122162, 20751.977890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39728.495789, 20143.058868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32511.182000, 15470.570000, 1839.296053, 1839.296053, 0.000000, X, Y) && !ellipse(39771.084000, 20630.386000, 2001.344058, 2001.344058, 0.000000, X, Y) && !ellipse(38240.458069, 18317.580200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36489.547128, 15701.232000, 896.832026, 896.832026, 0.000000, X, Y) && !ellipse(31495.659200, 13400.476000, 3110.928090, 3110.928090, 0.000000, X, Y) && !ellipse(36179.897797, 18381.357986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36686.294189, 19622.483292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37700.310944, 17213.803543, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Nov 26 11:09:31 2011] Writing fullrun_mos1_xmm0151412401_pi300-10000_pass1_cl_src68.gif
[Sat Nov 26 12:32:56 2011] Mean detx,y = (-15347.61, -42.30) 
[Sat Nov 26 12:32:58 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Nov 26 12:33:28 2011] Binned source spectrum to 10 counts/bin
[Sat Nov 26 12:33:29 2011] Setting source spectrum file to fullrun_mos1_xmm0151412401_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Sat Nov 26 12:33:29 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0151412401_pi300-10000_pass1_cl_src68_bgd.pi.gz
[Sat Nov 26 12:34:40 2011] Not generating rmf since there are only 97 counts
[Sat Nov 26 12:34:40 2011] rmf not generated due to insufficient counts
[Sat Nov 26 12:35:19 2011] Updating aperture counts using extracted products
[Sat Nov 26 12:35:19 2011] Error reading totcts from fullrun_mos1_xmm0151412401_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Sat Nov 26 12:35:19 2011] No arf file for this source, not re-computing flux
[Sat Nov 26 12:35:21 2011] Flag b found in src. 68 procflags, skipping spectral fitting
[Sat Nov 26 12:35:21 2011] Flag c found in src. 68 procflags, skipping spectral fitting
[Sat Nov 26 12:35:21 2011] Source 68 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Nov 26 12:35:22 2011] xmm0151412401/analysis//spectral/fullrun_mos1_xmm0151412401_pi300-10000_pass1_cl_src68_pl.csv not found, spectral fit skipped or did not complete