[Fri Nov 25 13:40:46 2011] Detection parameters:
  Position = (445.5, 213.0) = 5 11 36.65 -69 59 27.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82.3 +/- 13.0
  Background counts = 8.3
  Rate = 0.006 +/- 0.0009

[Fri Nov 25 13:40:51 2011] Off-axis axis estimate = 12.33'
[Fri Nov 25 16:06:28 2011] Using EEF radius (= 12.59 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 16:06:28 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Nov 25 16:06:28 2011] Initial guess for spatial extent in simple fitting = 12.59"
[Fri Nov 25 16:06:28 2011] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.911
[Fri Nov 25 16:06:28 2011] Giving source the simple spatial ID 39 for pass 0, mean size = 12.59"
[Fri Nov 25 23:20:55 2011] fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_src39.ximg exists
[Fri Nov 25 23:20:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_src39.csv
[Fri Nov 25 23:20:55 2011] fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_src39_1.ximg exists
[Fri Nov 25 23:20:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_src39.csv
[Fri Nov 25 23:20:55 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 23:20:58 2011] fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Fri Nov 25 23:20:58 2011] fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Fri Nov 25 23:20:58 2011] Fit fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Fri Nov 25 23:21:42 2011] Warning: source 39 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 11.094354 pixels away
[Fri Nov 25 23:21:42 2011] Spatial fit model total counts = 629.105000, observed total counts = 629.000000
[Fri Nov 25 23:21:42 2011] Offset between fit and detection position for source 32 = 0.371117 pixels
[Fri Nov 25 23:21:42 2011] Warning, changing simple spatial fit ID from 39 to 86
[Fri Nov 25 23:21:42 2011] 534.912000 total counts/ 508.035000 bgd. counts: snr = 1.192433
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.371117 pixels
  Position = (445.3, 212.6) = 5 11 36.83 -69 59 26.0
  Extent = 4.6 (3.1-9.1)", rotation angle = 0
  Source counts = 26.9 +/- 23.1
  Background counts = 508.0
  Rate = 0.002 +/- 0.002
  Deleting source due to low Poisson probability