[Fri Nov 25 13:40:45 2011] Detection parameters:
  Position = (427.7, 218.1) = 5 11 51.74 -69 59 1.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.6 +/- 14.1
  Background counts = 24.1
  Rate = 0.005 +/- 0.001

[Fri Nov 25 13:40:51 2011] Off-axis axis estimate = 11.04'
[Fri Nov 25 16:06:28 2011] Using EEF radius (= 11.95 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 16:06:28 2011] Initial guess for spatial extent in simple fitting = 11.95"
[Fri Nov 25 16:06:28 2011] source mask rpix=2.7, npix_max = 42, mask sum = 42, frac = 0.996
[Fri Nov 25 16:06:28 2011] Giving source the simple spatial ID 63 for pass 0, mean size = 11.95"
[Fri Nov 25 23:20:56 2011] fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_src63.ximg exists
[Fri Nov 25 23:20:56 2011] fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_src63_1.ximg exists
[Fri Nov 25 23:20:56 2011] Fit fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_src63 appears to have run properly
[Fri Nov 25 23:20:59 2011] fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Fri Nov 25 23:20:59 2011] fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Fri Nov 25 23:20:59 2011] Fit fullrun_mos1_xmm0151412401_pi300-10000_cl_pass0_tfrozen_src63 appears to have run properly
[Fri Nov 25 23:21:42 2011] Source 28 is offset by -0.292950 and 1.573701 pixels which is larger than
2 X fitted extent = 1.391039 x 1.391039, not incorporating fit results
[Fri Nov 25 23:21:42 2011] Warning, spatial fit 63 centroid is now closest to src. 71
[Fri Nov 25 23:21:42 2011] Source 28 is offset by 1.020591 and -4.617288 pixels which is larger than
2 X fitted extent = 10.690805 x 1.336354, not incorporating fit results
[Fri Nov 25 23:21:42 2011] Source 28 is offset by -4.979409 and 1.764321 pixels which is larger than
2 X fitted extent = 1.336354 x 1.336354, not incorporating fit results
[Fri Nov 25 23:21:42 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 23:21:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 23:21:42 2011] Assessing source extent using major
[Fri Nov 25 23:21:42 2011] Source does appear to be extended
[Fri Nov 25 23:21:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Nov 25 23:21:42 2011] Source is confused with source 1
[Sat Nov 26 02:16:19 2011] Using EEF radius (= 11.95 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 02:16:19 2011] Initial guess for spatial extent in simple fitting = 11.95"
[Sat Nov 26 02:16:19 2011] source mask rpix=2.7, npix_max = 42, mask sum = 42, frac = 0.996
[Sat Nov 26 02:16:19 2011] Giving source the simple spatial ID 47 for pass 1, mean size = 11.95"
[Sat Nov 26 10:44:20 2011] fullrun_mos1_xmm0151412401_pi300-10000_cl_pass1_src47.ximg exists
[Sat Nov 26 10:44:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0151412401_pi300-10000_cl_pass1_src47.csv
[Sat Nov 26 10:44:20 2011] fullrun_mos1_xmm0151412401_pi300-10000_cl_pass1_src47_1.ximg exists
[Sat Nov 26 10:44:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0151412401_pi300-10000_cl_pass1_src47.csv
[Sat Nov 26 10:44:20 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0151412401_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0151412401_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 10:44:24 2011] fullrun_mos1_xmm0151412401_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Sat Nov 26 10:44:24 2011] fullrun_mos1_xmm0151412401_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Sat Nov 26 10:44:24 2011] Fit fullrun_mos1_xmm0151412401_pi300-10000_cl_pass1_tfrozen_src47 appears to have run properly
[Sat Nov 26 10:45:06 2011] Spatial fit model total counts = 1117.260000, observed total counts = 1119.000000
[Sat Nov 26 10:45:06 2011] Offset between fit and detection position for source 28 = 7.135186 pixels
[Sat Nov 26 10:45:06 2011] Warning, changing simple spatial fit ID from 47 to 4
[Sat Nov 26 10:45:06 2011] 1059.179000 total counts/ 672.950000 bgd. counts: snr = 14.888587
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 7.135186 pixels
  Position = (434.7, 216.6) = 5 11 45.82 -69 59 9.2
  Extent = 29.4 (29.3-29.5)", rotation angle = 0
  Source counts = 386.2 +/- 32.5
  Background counts = 673.0
  Rate = 0.03 +/- 0.002
[Sat Nov 26 10:45:07 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 10:45:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 10:45:07 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 10:45:07 2011] Source does appear to be extended
[Sat Nov 26 10:45:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 11:09:28 2011] XMMSAS src. selection expression = ellipse(37769.528600, 18794.556000, 1764.954051, 1764.954051, 0.000000, X, Y)
[Sat Nov 26 11:09:28 2011] Writing source region out to fullrun_mos1_xmm0151412401_pi300-10000_pass1_cl_src28_src.reg
[Sat Nov 26 11:09:28 2011] Extracting stamp from image fullrun_mos1_xmm0151412401_pi300-10000_cl_sm2.00.img.gz, (333, 115) - (536, 318)
[Sat Nov 26 11:09:28 2011] XMMSAS bgd. selection expression = annulus(37769.528600, 18794.556000, 2941.590085, 5883.180169, X, Y) && !ellipse(37712.146000, 18419.464000, 1179.664034, 1179.664034, 0.000000, X, Y) && !ellipse(37814.850000, 19420.864000, 1761.792051, 1761.792051, 0.000000, X, Y) && !ellipse(36842.797546, 17791.584381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38409.636536, 20577.161469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37445.252899, 19864.004669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38539.252000, 21099.128000, 1911.960055, 1911.960055, 0.000000, X, Y) && !ellipse(36649.396000, 20376.124000, 1809.752052, 1809.752052, 0.000000, X, Y) && !ellipse(36588.889130, 18566.615311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39567.468262, 21445.714478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38180.532000, 17725.070000, 2005.192058, 2005.192058, 0.000000, X, Y) && !ellipse(37091.972046, 18396.324387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39012.656000, 19149.984000, 1172.672034, 1172.672034, 0.000000, X, Y) && !ellipse(37659.078339, 21508.685135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30305.782000, 14313.010000, 1865.488054, 1865.488054, 0.000000, X, Y) && !ellipse(38532.482000, 19468.330000, 3920.768113, 3920.768113, 0.000000, X, Y) && !ellipse(32123.692719, 16178.395218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39341.302246, 22494.124481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36216.600922, 17081.484848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31632.562000, 14639.180000, 3678.592106, 3344.704096, 317.580000, X, Y) && !ellipse(36434.122162, 20751.977890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39728.495789, 20143.058868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32511.182000, 15470.570000, 1839.296053, 1839.296053, 0.000000, X, Y) && !ellipse(39771.084000, 20630.386000, 2001.344058, 2001.344058, 0.000000, X, Y) && !ellipse(38240.458069, 18317.580200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31707.172000, 13969.027000, 1555.504045, 1555.504045, 0.000000, X, Y) && !ellipse(36489.547128, 15701.232000, 896.832026, 896.832026, 0.000000, X, Y) && !ellipse(31495.659200, 13400.476000, 3110.928090, 3110.928090, 0.000000, X, Y) && !ellipse(36179.897797, 18381.357986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36686.294189, 19622.483292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37700.310944, 17213.803543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39150.500000, 20542.394000, 1960.384056, 1960.384056, 0.000000, X, Y)
[Sat Nov 26 11:09:28 2011] Writing fullrun_mos1_xmm0151412401_pi300-10000_pass1_cl_src28.gif
[Sat Nov 26 11:42:12 2011] Mean detx,y = (-14937.84, -2211.39) 
[Sat Nov 26 11:42:16 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Nov 26 11:43:04 2011] Binned source spectrum to 10 counts/bin
[Sat Nov 26 11:43:04 2011] Setting source spectrum file to fullrun_mos1_xmm0151412401_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sat Nov 26 11:43:04 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0151412401_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Sat Nov 26 12:35:17 2011] Updating aperture counts using extracted products
[Sat Nov 26 12:35:17 2011] Error reading totcts from fullrun_mos1_xmm0151412401_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sat Nov 26 12:35:19 2011] No arf file for this source, not re-computing flux
[Sat Nov 26 12:35:21 2011] Flag b found in src. 28 procflags, skipping spectral fitting
[Sat Nov 26 12:35:21 2011] Flag c found in src. 28 procflags, skipping spectral fitting
[Sat Nov 26 12:35:21 2011] Source 28 has no response, skipping
[Sat Nov 26 12:35:22 2011] xmm0151412401/analysis//spectral/fullrun_mos1_xmm0151412401_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete