[Mon Dec 26 22:35:40 2011] Detection parameters:
  Position = (384.4, 262.5) = 5 12 30.18 -69 56 1.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.4 +/- 9.8
  Background counts = 17.8
  Rate = 0.005 +/- 0.0009

[Mon Dec 26 22:35:40 2011] Off-axis axis estimate = 6.75'
[Mon Dec 26 23:03:51 2011] Using EEF radius (= 9.81 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 23:03:51 2011] Initial guess for spatial extent in simple fitting = 9.81"
[Mon Dec 26 23:03:51 2011] source mask rpix=2.3, npix_max = 30, mask sum = 18, frac = 0.593
[Mon Dec 26 23:03:51 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 9.81"
[Mon Dec 26 23:34:38 2011] fullrun_mos2_xmm0151412201_pi300-10000_cl_pass0_src3.ximg exists
[Mon Dec 26 23:34:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0151412201_pi300-10000_cl_pass0_src3.csv
[Mon Dec 26 23:34:38 2011] fullrun_mos2_xmm0151412201_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Dec 26 23:34:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0151412201_pi300-10000_cl_pass0_src3.csv
[Mon Dec 26 23:34:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0151412201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0151412201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 23:34:38 2011] fullrun_mos2_xmm0151412201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Dec 26 23:34:38 2011] fullrun_mos2_xmm0151412201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Dec 26 23:34:38 2011] Fit fullrun_mos2_xmm0151412201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Dec 26 23:34:46 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 12.130081 pixels away
[Mon Dec 26 23:34:46 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 23:34:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 23:34:46 2011] Assessing source extent using major
[Mon Dec 26 23:34:46 2011] Source does appear to be extended
[Mon Dec 26 23:34:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 23:59:32 2011] Using EEF radius (= 9.81 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 23:59:32 2011] Initial guess for spatial extent in simple fitting = 9.81"
[Mon Dec 26 23:59:32 2011] source mask rpix=2.3, npix_max = 30, mask sum = 18, frac = 0.593
[Mon Dec 26 23:59:32 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 9.81"
[Tue Dec 27 00:47:50 2011] fullrun_mos2_xmm0151412201_pi300-10000_cl_pass1_src3.ximg exists
[Tue Dec 27 00:47:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0151412201_pi300-10000_cl_pass1_src3.csv
[Tue Dec 27 00:47:50 2011] fullrun_mos2_xmm0151412201_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Dec 27 00:47:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0151412201_pi300-10000_cl_pass1_src3.csv
[Tue Dec 27 00:47:50 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0151412201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0151412201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 00:47:50 2011] fullrun_mos2_xmm0151412201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Dec 27 00:47:50 2011] fullrun_mos2_xmm0151412201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Dec 27 00:47:50 2011] Fit fullrun_mos2_xmm0151412201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Dec 27 00:47:59 2011] Spatial fit model total counts = 81.994600, observed total counts = 82.000000
[Tue Dec 27 00:47:59 2011] Offset between fit and detection position for source 7 = 0.419048 pixels
[Tue Dec 27 00:47:59 2011] 83.778000 total counts/ 62.113300 bgd. counts: snr = 2.748909
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.419048 pixels
  Position = (384.7, 262.2) = 5 12 29.96 -69 55 58.8
  Extent = 4.3 (2.5-6.4)", rotation angle = 0
  Source counts = 21.7 +/- 9.2
  Background counts = 62.1
  Rate = 0.001 +/- 0.0006
[Tue Dec 27 00:47:59 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 00:47:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 00:47:59 2011] Assessing source extent using major axis lower bound
[Tue Dec 27 00:47:59 2011] Source does appear to be extended
[Tue Dec 27 00:47:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 00:54:57 2011] XMMSAS src. selection expression = ellipse(33417.200000, 22762.381600, 260.212807, 260.212807, 0.000000, X, Y)
[Tue Dec 27 00:54:57 2011] Writing source region out to fullrun_mos2_xmm0151412201_pi300-10000_pass1_cl_src7_src.reg
[Tue Dec 27 00:54:57 2011] Extracting stamp from image fullrun_mos2_xmm0151412201_pi300-10000_cl_sm2.00.img.gz, (370, 247) - (400, 277)
[Tue Dec 27 00:54:57 2011] XMMSAS bgd. selection expression = annulus(33417.200000, 22762.381600, 433.688012, 867.376025, X, Y)
[Tue Dec 27 00:54:57 2011] Writing fullrun_mos2_xmm0151412201_pi300-10000_pass1_cl_src7.gif
[Tue Dec 27 00:56:30 2011] Mean detx,y = (-333.04, -9615.54) 
[Tue Dec 27 00:56:34 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 27 00:56:54 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 27 00:56:55 2011] Setting source spectrum file to fullrun_mos2_xmm0151412201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Dec 27 00:56:55 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0151412201_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Tue Dec 27 01:00:32 2011] Not generating rmf since there are only 21 counts
[Tue Dec 27 01:00:32 2011] rmf not generated due to insufficient counts
[Tue Dec 27 01:01:32 2011] Updating aperture counts using extracted products
[Tue Dec 27 01:01:32 2011] Error reading totcts from fullrun_mos2_xmm0151412201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Dec 27 01:01:33 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 01:01:33 2011] Using photon index=1.80, rate=0.00143, arf fullrun_mos2_xmm0151412201_pi300-10000_pass1_cl_src7.arf
[Tue Dec 27 01:01:33 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 01:01:33 2011] Updating source flux to 3.1e-14
[Tue Dec 27 01:01:36 2011] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Dec 27 01:01:37 2011] xmm0151412201/analysis//spectral/fullrun_mos2_xmm0151412201_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete